Please return following links to the footer:
Designed by Frances Photography, thanks to: WordPress template, Home Birth Tips and WP free themes
CnAutotool-China Car diagnostic tool center

Monthly Archives January 2018

How toinstall anduse Cummins INLINE 5 and Cummins INLINE 6?

1. How toinstall Cummins INLINEsoftware ?

Free download Cummins Inline 7.6.2 (connect cnautotoo.com) and get how to install Cummins Inline software. to use with Cummins Inline 5 Cummins Inline 6 data link, DPA5 Dearborn, NEXIQ USB Link, XTruck USB Link for truck diagnosis.

THE MOST IMPORTANT- a working Cumminsinline crack or original
There are many links below to download Cummins inline for free; but usually the software may come with unknown security coz never be tested by professionals, or expire after use for several days. For sake of safety, you had better use a tested version.( Please contact us for technical assist , we will offer the correct software )

http://www.cnautotool.com/search.php?keywords=Cummins+INLINE&imageField=+

Cummins INLINE Software System Compatibilit...

Read More

How to Solve the Issue “ Please Insert TF Card “ for MCT-500 MCT500 Motor Scanner Tool

Recently , there have some customers met the problem “ Please Insert TF Card ” for MCT-500 MCT500 Motor scanner after used it one period time . Like the picture display :

We analyzed this problem , there have 2 situations met the issue :

  1. The TF card from the main unit didnt insert well

Solutions : Please open the back case , check the TF card whether insert well or not , you can take out the TF card , and insert well again

  1. The TF card was damaged or the software from the TF card damaged

Solutions : Please take out the TF card from the main unit , download the latest software into the card , then insert the card to the device test it , if the issue is the software , it can work after you download the new software ; But if the problem still exist , the problem must be the TF c...

Read More

How to Install Alldata 10.53 Software

ALLDATA 10.53 professional workshop service and repair manual, maintenance, wiring diagram, diagnostic, all cars & light trucks 1983-2013.

some customer cant install the Alldata 10.53 or cant run this software after install the software.

Please note following information how to solve those problem.

1. First,if you pc has anti-virus software.pls close that. and if you pc is with network,disable the network or unplug the network cable.
2. Then open the hdd.open the alldata file.open the file”alldata 10.53\AllData.10.53.1000.101_Install_Disk_2013.08\AFW_10530813″

choose”set up”to install the softwarealldata .

as picture:

Most problems that the customers meet:

double press setup, but no action or shows wrong information,maye setup file is damaged or cant be used.

Setup file is 794KB,i...

Read More

How to Solve the Problem for GM MDI

There have many situations cant use GM MDI , when you have some troubles to use the tool ,  you should reboot the MDI software and do the Self Test first . Please check the bellowing 4 issues for GM MDI :

1. “MDI DOES NOT PASS SELF TEST”

If you meet this problem, it indicates that there is an internal problem in the MDI, you need to connect the MDI to a PC by using the USB and do the software recovery procedure or you can contact your local customer support center for help.

 

2. “MDI ERROR LED LIGHTS AFTER POWER ON”

This condition indicates that during power on, there has detected a problem...

Read More