Shop by Category
GM Tech2 GM Scanner -CANdi & TIS
Download：TECH-2 software version list.pdfThe Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2013
Descriptions for GM Tech-2 PRO Kit With CANDI InterfaceIf you order this item, we can provide you a card (32 MB PCMCIA Card) with any one of these following softwares,please choose the software you want when you place the order:1. GM-2013 V32.007 software2.OPEL-(english) 2013 V151.001software
3. SAAB-2010 software
4. SUZUKI -2010software
5. ISUZU-2009 software6. Holden export software
7. Australia Holden softwareNotice: TIS together with this unit is Offline TIS,offline TIS is free,can program GM and Opel cars only till 2008. we will offer clear instructions and the cracked file.Software version and Language for reference you can download the list from here: Download
Please note in your order the software and software language of your choice. Or you can contact our customer service.
FeaturesAuthentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.Support for on-board diagnostics on all GM systems 1992 thru current year.Removable hardware modules provide insurance against scan tool obsolescence.Large, easy-to-read backlit screen.RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.Ability to view the status of vehicle diagnostic tests as they run.Bi-directionalThe authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.Vetronix Tech-2 SpecificationsDimensions: 12"Microprocessor: 32 bit, 16 MHz.Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.Communications: Integral RS232 communication port.Screen: 3.8" backlit monochrome with full graphics.Capability: 320 40 pixels. Displays up to 9 vehicle parameters at once.Tech 2 Kit Includes1. Tech 2 Flash Tester2. 32 MB PCMCIA Card with GM OE Applications3. Data/Sensor/Trouble Code Manual4. DLC Cable, DLC Loopback Adapter5. 12V Cigarette Lighter Power Cable6. SAE 16/19 Adapter7. NAO 12/19 Adapter8. Candi Module9. Battery Power Cable10. Storage Case11. DVD （Electronic Documentation V13.0 and TIS 2000）An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash’s diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.All products with one year warranty that you purchased from Autosky company(note: if you damaged the machine by yourself or it is damaged due to you drop the products on the undergrand, this condition is not in warranty, but we also will repair products for you, we only take cost of accessories, and PLZ send back the products only by post office, and write it as gift, the value is under USD50, thanks)PLZ contact our sales in time if you meet any problem with our products when you got it in your hand, we will take action in time for solving it!
Customer Reviews(Total5 Customer Reviews)