Notice: Please dont connect the network when use it , or the hard disk will be damaged cant working !!!
1.Connect the hard disk with your laptop , start your laptop ( Please dont connect the network )
2.If cant find the hard disk , or with blue screen , please enter into the BIOS system , make a select for SATA MODE to AHCI , then restart your laptop again .
3.Please set up the date of your laptop to 2017.01.01 !!!
4.Connect Chrysler wiTech MicroPod 2 USB Port with PC, OBD2 Port connect with car. The computer will automatically install Chrysler wiTech MicroPod 2 hardware driver
5.After Drive installed, you can find your device in your computer device manager
6．Double click the icon of Chrysler wiTech MicroPod 2
7.You will see Chrysler wiTech MicroPod 2 connected with software, Please click ” next”
8. please select “word off line”，Then click “finish” and go to next step
9. Select ” Connect”
10. To this step, you can choose the type of car which you want to test the system
Any other request , welcome to contact www.cnautotool.com or email to email@example.com