Please return following links to the footer:
Designed by Frances Photography, thanks to: WordPress template, Home Birth Tips and WP free themes
CnAutotool-China Car diagnostic tool center

Monthly Archives May 2018

How to Use BMW ICOM B for initial Use ?

Before flashing anything with a new ICOM-B for the first time, I recommend doing a stress test with Tool32.

Configure Ediabas to most async ab 625, open Tool32 and cicr.prg.

Then select job fs_lesen

and then from Tool32 top bar, select “play”.

This will make the “read error memory” job run on repeat.

If it can do it for 30-60 minutes, then the head is probably ok.

Obviously the BMW ICOM emulator must be connected to the CIC.
When you make a flashing , you can confirm data communication in task managers.

And, ICOM B, green flashes on and off.

How to Read LED info from ICOM B:
The ICOM B includes a (2) two LED display. These LED|s displays the following information and warnings:

1.One 2-color LED label SYSTEM for the general status:

Off ——————————– no power or problems with po...

Read More

What is the Best Vehicle Diagnostic Tool ?

Too many different auto diagnostic tools on the market , so which will be the best one ?

We think that Autel Maxisys Ms908 Pro with the high cost performance , lets check the complete Features for it as bellowing :

 MaxiFix

 

Shop Manager

 

 Workshop information

 

 

Vehicle history

 

 

Data Manger

 

 

 Update

 

 

 VCI Manager

 

 

 Remote Desk

 

 

 Support

 

 

 Quick Link

 

 

 Lets check the diagnostic for VW as following :

Diagnostics

 

 

 

 

For more details of Autel MS908P ? Welcome to check our official website : www.cnautotool.com

Read More

GM MDI vs GM Tech2 Diagnostic Tool: Vehicle Coverage and Functions

I have both GM Tech2 and GM MDI interface, I’ll chip in with my experience and give you some tips if you have a GM and consider buying a tool for it.

Cloned GM MDI interface:
MDI/GDS2 is used on C7 Vettes, and other vehicles prior to 2014 (for example, Chev Cruze starting in 2011 uses MDI, as well as others).

Cloned GM Tech 2 scan tool:
I use the Tech2 on my 427 vert as well, and it does everything stand-alone except module recalibration (programming or ‘flashing’).

By the way , There wasn’t a single all-inclusive model year where they cut over from the Tech2 to MDI for all GM models. It had more to do with platforms that were more-or-less fresh designs or clean-sheet designs after about 2008 or so.

Why MDI interface is more preferable for GM?
Flash faster: MDI & GDS2
As for why ...

Read More