Auro OtoSys IM600 Key Learning under All Keys Lost Scenario with

1. Turn on the Auro OtoSys IM600 , click “OtoSys “→”IMMO” 2. Connect to WIFI , then go back the vehicle menu 3. Click “ AUDI “ , then click 2015-2017 vehicle model “ to the “function select” , choose “ Key Pictures “ 4. Click “All keys lost “ 5. Proceed… Continue Reading

BMW ICOM A2+B+C Special Features Compared with ICOM

Software Version : V2018.09 ISTA – D: 4.12.12,with SDP data 4.12.12 ISTA – P: with Engineer Programming can program F/G/I/K chassis for car (through the ICOM, not other cable ) Vin: V2018.08 BMW ETK: 2018.08 BMW KSD: 2018.07 Multilanguage BMW FSC Navigation Code Generator BMWAiCoder… Continue Reading

Lonsdor K518ISE program BMW FEM/BDC key

Lonsdor K518ISE has released BMW FEM/BDC key programming function, here is a post to help you program a key for BMW FEM/BDC modules easily. It need three steps, read key info,re-process FEM/BD system and Generate dealer key. Read the operation instructions… Continue Reading

The way to diagnognostic bwm icom

1. Open the BMW’s driver-side door. Look into the leg-space beneath the dashboard. There, you will find 16 pin-receiving Data Link Connector. This DLC outlet is featured in different locations, depending on the model of BMW you are working with.… Continue Reading