Please return following links to the footer:
Designed by Frances Photography, thanks to: WordPress template, Home Birth Tips and WP free themes
CnAutotool-China Car diagnostic tool center

Monthly Archives June 2019

How To Register Autel MaxiDiag MD808/MD808 Pro?

As we all know , all autel scanners need to register first , then you could download software, update online, retrieve information and get warranty service . We have customers who dont know how to register autel MaxiDiag MD808 ( or MD808 Pro ) , please check all details as bellow :

Notice : Before registration , please confirm your network is working properly .

Registration Steps :

1. Visit the website http://pro.autel.com.

2. If you already have an Autel account, Sign In with your account ID and password.

3. If you are a new member to Autel, click on the Create Autel ID button on the left side to create an ID.

4. Enter the required information in the input fields, and click the Get Verification Code button to get a verification code for email validation.

5...

Read More

Reasons for CGDI MB“Load File Failed, error code: 27E1”

Here’s the issues for CGDI MB key programmer error: “Load File Failed, error code: 27E1”

Possible reasons that cause the error:

1).  Device fell on the ground and damaged

2).  Take apart the CGDI main unit manually

CGDI Prog MB host is equipped with an encrypted battery. If you disassemble the programmer, the encrypted battery will power off automatically. Benz Monster software refuses to run properly.

What’s more, the battery cannot be purchased separately nor installed by yourself.

The ONLY solution is to send CGDI back to repair.

 

Note:

Always read CGMB label and directions carefully before beginning use.

For more details , please feel free to contact us directly , sale@cnautotool.com

 

 

Read More

How to do Program for BMW F series with BMW CGDI

Some customers dont know how to do program for BMW F series with CGDI , please check the details as following steps :

1. Open doors and meters , OBD connects to the vehicle

2. Click into the BMW F Series Program

3. Data was read successfully, display relevant module information

4. To program FEM-BODY as example, click “program”

5. Please ensure that the battery has enough power and click ‘yes’

a. Make sure the VIN is correct.

b. Support modification

6. Programming, please be patient

7. Verify FLASH correctly and program successfully

For more details for MB CGDI , welcome to contact us directly

sale@cnautotool.com

www.cnautotool.com

 

Read More

How to Write the Original Key Through the NEC Adapter With CG-MB

CGDI Prog MB tool with strong functions which its able to add keys on for Mercedes Benz and program a new key when all keys are lost. Now , lets check the steps how to write the original key through the NEC adapter .

1. Please insert the key into CG-MB device

2. Click ”Read”show related key information

3. Disassemble the key, take the chip out, and solder it to the NEC adapter

4. Read keyview related information

5. Reset and erase new key

6. Click open/writeplease note the prompt

7. Chooseunused key position dataclick and open it

8. Write success

9. Take the chip out,weld NEC adapter back the key, get on the car

For more details for MB CGDI , welcome to contact us directly

sale@cnautotool.com

www.cnautotool.com

Read More