Please return following links to the footer:
Designed by Frances Photography, thanks to: WordPress template, Home Birth Tips and WP free themes
CnAutotool-China Car diagnostic tool center

Monthly Archives October 2019

Which Ford key programming is Better ?

Want to know the comparisons for VCM II clone,FLY FVDI J2534 & VCM IDS 3 ? Lets check one customer’s experience as following :

Question :

I just found out that my tools are not enough and need to get one of the tools mentioned to initialize module on 2011+ Ford cars and vans.

I did a lot of key programming, FIP/PCM initialization, on 2001 fords, 2006+, 2010, with Launch/Forscan, but on newer EURO5 cars I can only adapt keys, but can’t initialize the ECU. It asks for incode by outcode, which I do not have access since code generators work until 05/2010 and my tools can’t calculate it.

So, what should I choose ? VCM II clone, FLY FVDI J2534 or VCM IDS 3 ?

Answer:

VCM II HQ clone is best tool of that bunch, but be aware that you will still need incode/outcode for key/security relat...

Read More

Reviews for SD Connect Clone or OEM (Clone) Xentry Diagnosis VCI C6

New Release mb star c6 support DOIP Xentry Diagnosis VCI C6 have more function than mb star c4

Review 1

SD connectC4 is better VCI Clone works like ecom

Review 2

SDconnect is easy to configure and LED screen helps quickly identify the number, software version and IP address.

Easy to switch from LAN and WiFi mode.

VCI has no screen

Review 3

OEM Xentry Diagnosis VCI C6 experience

This device unlike any other devices . The device “C6″ have a particularly rules first of all the re-seller must send you the driver’s files for each version because it is not like C3 , C4 , C5 devices working with any version.

like, if you have xentry version 12 2018, and you want install “Xentry” versions 05 2019 or 09 2019 , you will have to have the driver files for versions 05 2019 , or 09 2019 from the ma...

Read More

How to Use Vediamo to Programming and Coding for Benz 722.9 Transmission Control Module

How to Use Vediamo to Activate Mercedes Benz SA500 Auto Fold Mirror

Today lets check some instructions for Benz 722.9 TCM EHS Programming & Coding by Vediamo as following :

1.Connect MB SD C4 interface to Benz and run Vediamo software,then select “VEcoute”

We are going to do EHS programming,so here we search “VGS” to find “VGSNAG2″ and click “OK” to connect to ECU

2.After connection build,select “Coding”–>“Flash”

3.Then the current flash state show as below.

Here you need to pay attention on the version of control module,make sure which version to be programmed.If you can not ensure,please use Xentry software to get the control module version.

4.Follow below order to select version file and programmed file,then click “Add” to search file

5.The 722...

Read More

How to Use Autel IM508 Work for Toyota Camry 2016 to do All Keys Lost Programming

Want to know how to do key programming for Toyota Camry 2016 all keys lost with Autel IM508 ?

Today lets check the steps as bellow:

Connect Autel IM508 to Toyota Camry OBD port,and connect Autel APB 112 to IM508

Enter “IMMO” menu>Toyota>Manual Selection>Other

Then select “Camry”–>Smart key>Keyless System(CAN)

Now select “Back UP Immobilizer Data”

This function is use to back up the EEPROM data of the smart box of the vehicle.The data can be used to generate the simulator key for emergency start of the vehicle to perform the key matching function.

Click “OK” to continue

Reading immobilizer data (make sure im508 connect to network)

After then save the EEPROM backup data file

Now press “OK” button to back,and select “Generate Simulator Key”

Select the EEPROM data.

Ch...

Read More

How to Use Vediamo to Activate Mercedes Benz SA500 Auto Fold Mirror

Before you use Vediamo to perform activation operation , you need to finish Benz mechanical fold mirror retrofit

1.Right/Left fold mirror

2.Driver side switch panel (include fold mirror switch)

3.Right/Left door module (After 2010,not need replacement)

Vediamo Activate SA500 Auto Fold Mirror:

1.Connect Benz MB SD diagnostic tool to vehicle OBD port,then run Vediamo software.

2.After connection build connection,click “V-Ecoute”

 

3.Select “System”

4.Change folder

5.Broswe model cbf,example:204cbf

6.Select “CGW_204″

7.Click “OK” to continue

 

8.Double click to connect to control module

9.Select “Coding”–>“Variant Coding”

 

9.Select “VCD_02_global_variant_coding” from service options

10.Select “500 spiegelanklappung not available” from “Current Coding” options

11...

Read More