Please return following links to the footer:
Designed by Frances Photography, thanks to: WordPress template, Home Birth Tips and WP free themes
CnAutotool-China Car diagnostic tool center

Category Autel Tool

How to Do when Autel Maxisys Elite get Error Message ?

Autel Maxisys Elite diagnostic tool certainly surpasses much beyond the general expectations with any vehicle engine scanner tool. The tool is designed for 3 purposes – Multi Tasking, Speed and Simplicity that is the prime need, especially, for any busy automobile repairing workshop.

There have customers have the issues no communication message .

A. If the MaxiSys Display Tablet is not connected to the VCI device, an “Error”message displays. An “Error” message indicates the display tablet is not communicating with the VCI device, and so cannot gain access to the vehicle control module. In this case, you need to do the following check-ups:

1. Check if the VCI device is powered on.

2...

Read More

Why we buy Autel Maxisys CV Heavy Duty Diagnostic Scan Tool

The complete MaxiSYS CV tool kit comes with the latest compact size J2534 MazxiFlash Elite . Features a built-in bluetooth VCI and performs pass-thru programming functions . The software support update online free one year and SAE J2534-2 compatible

Autel Maxisys CV is good heavy duty truck diagnostic tool which supported the special functions as bellow :

DOC/DPF Replacement Reset

Fuel Pressure Adaptation Reset

Injector CEOM Reset

O2 Sensor Calibration

Injection Quantity Adjustment

DPF Regeneration

DSI System De-Aeration

MAF Sensor Calibration

Parameter Setting

Aftertreatment Maintenance

Aftertreatment Maintenance Filter Installation

Aftertreatment Particulate Matter Sensor Regeneration

Aftertreatment SCR Catalyst Cold Soak Override

Aftertreatment SCR System Health Monitor

Boost Ca...

Read More

Autel Tools GM Software Updated to V13.5 (2018/10/29)

Autel Scanners like MaxiSys MS908SP/MS908P, MS908, MS906, MS906BT etc updated on October 29th, 2018. Like GM software , see the update details as bellow :

GM,Service_GM
Version V13.50

Service_GM

OPTIMIZE:Code structures
Date 2018/10/29
GM
1. Fixed communication failure in electronic brake control module of 2006 GMC Truck C – T series
2. Fixed communication failure of Live data function in transmission control module of 2012 Chevrolet Cruze models
3. Fixed procedure error of Intake CMP actuator function in engine control module of 2014 Chevrolet Cruze models
4. Fixed VIN analysis function of certain models

Want to know more updates for Autel autmotive diagnostic tools , welcome to contact us at www.cnautotool.com or sale@cnautotool.com

Read More

How to Installing Printer Driver and use it for Autel Maxisys MS906

The Autel MaxiSys MS906 Diagnostic Platform allows you to print the information needed for your convenience. To realize the printing function, you need to install the printer driver program.

Steps to install the printer driver program

1. Insert the CD into the CD-ROM of the computer and open the CD folder.

2. Double click on Autel Run.exe item.

3. Click the MaxiSys Printer icon in the MaxiSys PC Suite screen.

4. Select the installation language and the printer driver installation wizard will load momentarily.

5. Follow the wizard instructions on the screen and C lick Next to continue.

6. Click on Install and the printer driver program will be installed onto the computer.

7. Click on Finish to complete the whole installation procedure.

NOTE: The MaxiSys Printer runs automatically after the...

Read More

Autel Maxisys MS908CV No Communication Message

As a new member of Autel’s MaxiSys family, the MaxiSys CV is built on the powerful MaxiSys 908 platform and provides a comprehensive disgnostic solution for virtually all commercial vehicles as well as machines made in North America, Europe and Asia. Offering advanced features and extreme ease-of-use, MaxiSys CV is the ideal solution for independent repair shops, owner-operators and various sized fleets seeking a single scan tool for all their professional heavy duty needs.

But sometimes there you will met some issues as bellowing 2 situations , please check how can we do next .

A: If the MaxiSys Display Tablet is not connected to the VCI device, an Errormessage displays. An Errormessage indicates the Display Tablet is not communicating with the VCI device, and so you cann...

Read More

How to Do MaxiScope Firmware Update for Autel Maxisys tool

Autel MaxiScope Automotive Oscilloscope Basic Kit Works with Autel Maxisys MS905 MS906BT MS906TS MS908 MS908P Tool .

The operating software of the MaxiScope is continuously being developed, and the update package can be downloaded free from the MaxiScope product webpage on Autel’s website: http://www.autel.com.

How to update the MaxiScope firmware ?

1.Install the CD provided with the MaxiScope tool kit into the CD-ROM of the computer. The driver installation wizard will load momentarily. 2. Click on Next on the welcome page.

3.Click the Browse button, and select a destination folder to install the program, and click Next to continue. Or directly click Next to continue without changing the default installation folder.

4. Click Install and the Setup...

Read More

How to Solve the issues” Network not available“ for Autel MaxiSys MS908P

There have person who used Autel Maxisys Pro MS908P , the network connection is good , but when going to Update page, it says “Network not available, please check the network”. So how to do next ? Lets check the solutions following

Solutions :

1. Enter Root Explorer/mnt/SDcard/scan/menu and check if there is “init.xml” file. If there is the file, just delete it. Then enter the menu again to make sure if it is deleted successfully.

2. If the network is still not available, please select the Maxisys icon on the main screen. Then hold it and move it to the top where you can see App info, force stop the process of Maxisys and clear the data. Then try to update again.

If cannot solve the problem, send the serial number to Autel check whether the scanner is genuine or not ...

Read More

Autel Maxisys Products Screen Issues and Solutions

Recently there have customers give feedback that their Autel Machine have issues for the screen , like the video as bellow :

1.Autel Maxisys MS908 Pro

2.Autel MS906BT

If your Autel MS906 , MS906BT , MS906TS , MS908P or Maxisys elite have the same issues :
1.Click any icon no response
2.Response very slowly
3.Display error with the screen
4.Adjust the screen useless

If you have met the same issues like above , that mean your screen has been damaged.At the same time , we need confirm the problem is for touch screen or LCD screen , so we can do one more step to confirm which exactly screen damaged .Use your mouse connect with the main unit of Autel , check whether can work or not .
1.If connect with mouse can work well , it confirm the issues only for the touch screen
2...

Read More

How To Register Autel Maxisys MS906 Automotive Diagnostic Scanner

MaxiSys MS906 is based on the Android operating system and is featured with an extensive coverage of OE-level diagnostics at an affordable price.

It’s the updated Version of Autel MaxiDAS DS708 , in order to get access to the Support platform and obtain update and other services from Autel, you should to register the Autel MaxiSys MS906 Diagnostic System the first time when you use it.

So how to register it ? Let’s check the steps as bellow :

1. Visit the website: http://pro.autel.com.

2. On the Sign In page, input your account ID and other information to log in, if you already have an account.

3. If you are a new member to Autel and do not have an account yet, click the Create Autel ID button on the left side.

4...

Read More

How to do MB SCN coding with Autel MaxiSys Pro MS908P

Many people know Autel Maxisys pro support Benz SCN Coding function.

Whats the SCN Coding ?  When replacing or flashing ME control unit or new Transmission control unit we must get new SCN, that is to say SCN coding. But they dont know how to do SCN Coding for Benz ? lets check the steps as following :

Step1: You should first connect Autel MS908P to J2534 ECU programming device and Benz car. Then start Autel MS908P and choose “Diagnostics”→ “Benz”→ “Automatic selection”

Then turn on ignition and wait a minute to read VIN. After read click “OK”.

Step2: Click “Programming” on main menu, next click “ME-SFI-Gasoline engine control”.


Click “Control module programming”→ “NEXT”→ “OK”→ “OK”.

Step3: Click “SCN coding”, you can see...

Read More