Please return following links to the footer:
Designed by Frances Photography, thanks to: WordPress template, Home Birth Tips and WP free themes
CnAutotool-China Car diagnostic tool center

Category Auto Scanner Tools

How to Install BMW ISTA+ for BMW ICOM A2 A3 Next Diagnostic Tools

What is ISTA and what is ISTA+:

ISTA is a workshop system that contains BMW AG Data and Information. ISTA stands for Integrated Service Technical Application. Way back when, during the initial development of this tool, BMW used DIS (Diagnostics Information System), and as the programs evolved and due to the nature of the file naming conventions utilized by BMW, the workshop system became known as Rheingold in the enthusiast world. Rheingold in actuality is the folder that contains the main application and data. Rheingold became ISTA-D (D stands for Diagnostics) and BMW’s programming application (not discussed in this document) used the same nomenclature, ISTA except with a P (for programming) or ISTA-P. This document only discusses ISTA+.

Eventually, based on the direction that the co...

Read More

Solutions for Witech “Registration Required” Issues

Recently , there have customer said he met some issues to use the wiTECH MicroPod 2 , the issues display as bellow :

He said allow him to connect to vehicle though – just continues to pop above message up .
We have offered the solutions for this issues , please check :
1.Right click the “witech diagnostic application “
2.Select the “Attribute” , Open file location , select “app-config”
3.Select “ edit “, find value=”5f86b7db0f4d58127d30dd7e4e44cd7f”change to value=”6f86b7db0f4d58127d30dd7e4e44cd7f”,click save

4.Restart witech diagnostic application , close the registration required window , click “next”

5.Select “ Work offline “ , click “ finish ”
Then it can work stable now , please try again , if you still not clearly , please check the Video here
Tha...

Read More

GM TECH2 CANDI Interface Instructions and Self-testing

As we all know GM Tech2 is famous auto diagnostic scanner in the market , when you use this machine , you will find that Candi interface is important work with this tool .

So what is the candi interfact ? It is an in-line cable module that works with existing Tech 2 components including the VCI, cables and adapters.

Then what is candi module ? It’s fully compatible with current and past Tech 2 software. The module powers up in a way that makes it transparent to the user. This allows the existing Tech 2 software to be used with no changes when the CANdi module is installed. If a vehicle requires the use of a CANdi module, the Tech 2 clone will enable features specific to the module.

Supports simultaneous communications on three CAN buses

Provides high-speed UART communications with the ...

Read More

Autel MS908 Pro Issues”Authorization Check Failed ! “Solution

Recently , some customers met this issues “Authorization Check Failed !”  with AUTEL MaxiSYS Pro MS908P Diagnostic system.

Error message :
Authorization Check Failed!
Error Code 3

Like the picture display :

Why this issues happen ?

The reason is that someone changed the language for Autel MS908 pro

So how to solve this issues ? Lets check the steps as bellow :

1. Connect to the internet
2. Log in PC Suit upgrade tool on networked computers
3. Obtain authorization automatically
4. If this serial number to determine the corresponding Autel ID, you can contact technical support queries.

Did all above information helpful for you ?

If you have any other problem for autel machines , welcome to contact us any time

 

Read More

How toinstall anduse Cummins INLINE 5 and Cummins INLINE 6?

1. How toinstall Cummins INLINEsoftware ?

Free download Cummins Inline 7.6.2 (connect cnautotoo.com) and get how to install Cummins Inline software. to use with Cummins Inline 5 Cummins Inline 6 data link, DPA5 Dearborn, NEXIQ USB Link, XTruck USB Link for truck diagnosis.

THE MOST IMPORTANT- a working Cumminsinline crack or original
There are many links below to download Cummins inline for free; but usually the software may come with unknown security coz never be tested by professionals, or expire after use for several days. For sake of safety, you had better use a tested version.( Please contact us for technical assist , we will offer the correct software )

http://www.cnautotool.com/search.php?keywords=Cummins+INLINE&imageField=+

Cummins INLINE Software System Compatibilit...

Read More

Chrysler Witech Micropod II Program 2014 Jeep Wrangler Add New Keys

Chrysler Witech Micropod II online version hot sale on cnautool.com, some custom order wiTECH micropod 2 from other supplier and stop work, we can offer wiTECH Chrysler diagnostic software installation service make wiTECH micropod 2 restart work. Or order wiTech Micropod 2 from cnautool.com directly. Below cnautotool.com customer share how to use wiTECH Micropod II add new key for 2014 Jeep Wrangler.

http://www.cnautotool.com/goods-5106-Chrysler+Diagnostic+Tool+wiTech+MicroPod+2.html


SUCCESS! Everything worked.
I was able to program the second key to my Jeep. You are amazing and I cannot thank you enough. Here is what I did on my 2014 Jeep Wrangler:
Situation: My Jeep came with only ONE key and I wanted a second key.
You must have Witech 16.05.15 or older installed...

Read More

How to Fix the Launch x431 Pro and Pro3 Firmware

We all know Launch products is the famouse auto scanner . Some person may have issues how to fix the x431 pro&pro3 firmware . Lets check the details as bellow :

The software should try and do this automatically after an update, when you go to diagnose a vehicle. If the DBS connector fails to connect to the tablet, or you need to manually do a “firmware fix” then follow these instructions to ensure the latest version of firmware is currently installed on the DBS connector
1. Open the” Launch X431″ app
2. Tap the top left “three white lines” icon to open the side menu
3. Click on the Profile tab and then “Firmware Fix”
4. Firmware Fix screen will prompt instructions
5. Make sure DBS connector is connected to a vehicle with sufficient battery power
6...

Read More

Launch Creader Professional CRP129 Premium and CRP123 Premium Comparisons

Good news that we have the LAUNCH CRP 123 Premium and CRP 129 Premium in stock now , and they are the new solution for car owners and services for express-diagnostics, with the maximum possibilities at relatively low cost.

For models LAUNCH CRP 123 / 129 Premium device capabilities allows read and erase error codes with explanations, read the current data on the four basic systems of the car – engine, transmission, ABS (ESP, DSC), Airbag (SRS), and for CRP 129 Premium are offered additional features for programming and service intervals resetting, some basic adaptations for the main important functions and ability of diagnostic of the system EPB (electronic parking brake) / SBC ( Sensotronic brake control module).

Solution CRP 129 Premium is especially useful for small services, servi...

Read More

GM MDI Software Installation and Instructions

GM MDI Software Installation and Instructions

 

1.Open DVD and install VMware-Player.exe

2. After installed VMware , running it , then copy the GDS file from the CD to the laptop , then choose VM.vmx and running the driver.
 

①Please setting the time zone to (GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi, then setting the time to recently .

②Please dont change the date here

③VMware connect device USB

 

Read More

How to Setting WIFI Connection for Volvo 88890300 Vocom Interface ?

How to Setting WIFI Connection for Volvo 88890300 Vocom Interface ?

Volvo 88890300 Vocom Interface is a diagnostics application that covers the whole repair process through the use of plug-ins. With Volvo 88890300 Vocom Interface you can diagnose, test, calibrate, and program a product. Volvo vocom support wifi for Volvo/Renault/UD/Mack , so how to setting the wifi connection when you use it ?

Lets check the steps :

1.Please use the USB cable adapter connect with your laptop and Vocom main unit .

2.Go to open Volvo PTT software. Choose Setting” → “Communication unit configuration”→ “Configure”→ “USB+ Directly to Communication unit.

3.Choose Direct” → “Restore default values” → “Apply” → “OK.

4...

Read More