Category BMW ICOM

BMW ISTA-D ISTA 4.18.12 ISTA-P 3.66.1.002 new released , the software version 2019.07 which can work for BMW ICOM, ICOM A2, ICOM A3, ICOM PRO+A3, ICOM NEXT .

For details of the new update software for BMW ICOM , lets check as following :

Software Version : V2019.07

ISTA – D: 4.18.12,with SDP Programming Database 4.18.13

ISTA – P: 3.66.1.002 with Engineer Programming，supports the programming of BMW motorcycles and electric vehicles can program F/G/I/K chassis for car (through the ICOM, not other cable )

Vin: V2019.06

BMW ETK: 2019.06

BMW KSD: 2019.06 Multi-language

BMW FSC Navigation Code Generator

BMWAiCoder for BMW Coding

BMW ICOM V2019.07, With free Software:

1. Get engineer version, INPA 5.00,winkfp 5.2.3,NCS 3.5.1, e-sys 3.30,data V66.1

2. get Chinese software DR.GINI B020

If you have business work for bmw vehicles , you will need the bellowing products :

1. Dealer level Diagnostic and program tools

The BMW supply a professional tool to BMW Dealer to let them make good after service for BMW cars .

A.Those tools from Old to new .

The old tools before 2005 is BMW GT1 BMW OPPS, it is old generation tool for BMW, support diagnostic and program, very fast , but not easy to use . and not produced any more for long time .

B.BMW ICOM series 

BMW ICOM 1 , BMW ICOM A2 , BMW ICOM NEXT .

Test three tools is almost same functions . the improve it A2 is more stable than A1 , BMW ICOM A1 with a bad Heat dissipation , when you do a program over 20mins , it will easy broken . but most of BMW program time is about 20-40 mins . So this tool is top produce ...

CGDI car key programmer is popular for BMW , work for BMW CAS1/CAS2/CAS3/CAS3+/FEM/BDC Key Programming and All Keys Lost .

Today we’d like to introduce how to do coding for BMW F series .

1. Connect CGDI BMW Pro to the car via OBD and click on “BMW F series coding”.

2. Choose ECU info

Note: this function needs to connect the internet, so please confirm the network is normal , click “ Read ECU info “ .

3. After reading ECU successfully, click on “ 3. FEM_BODY” like the picture display

4. Click on “Backup coding”, then “Yes”.

5. Backup coding succeed, this is the path to save the file.

6. Click coding

7. Coding succeed

So do you know how to do coding for BMW F series now ? Any more questions , welcome to check www.cnautotool.com

Thank you

Software Version : V2018.09
ISTA – D: 4.12.12,with SDP data 4.12.12
ISTA – P: 3.65.0.500 with Engineer Programming
can program F/G/I/K chassis for car (through the ICOM, not other cable )
Vin: V2018.08

BMW ETK: 2018.08
BMW KSD: 2018.07 Multilanguage
BMW FSC Navigation Code Generator
BMWAiCoder for BMW Coding

BMW ICOM V2018.09 , With free Software:
1. Get engineer version, INPA 5.00,winkfp 5.2.3,NCS 3.5.1, e-sys 3.30.1,data V64.2
2. get Chinese software DR.GINI B020
3. get count code navigation tool software FSC operator code
4. get one-clik hidden brush tool BMWAi V4.6
5. Add DIS Software for Old cars, DISV57 and DISV44,diagnostic and ecu programmer

Top 5 Reasons to Get BMW ICOM A2 with Latest Software

1. BMW ICOM A2 Hardware Version: V2018.07
2...

The new version of BMW ICOM A2+B+C diagnostic & programming tool is equipped with WIFI and a router. Following easy and important steps leads you to the correct way on configuring ICOM WIFI USB D-link and enabling WIFI wireless function. For more information, please visit our website www.cnautotool.com.

BMW ICOM A2+B+C Function:
* Interface A2 – OBD diagnostic supporting MOST, D-CAN and K-CAN protocols.
* Interface B – diagnostic via MOST bus, and have connection to A-interface via USB connection.
* Interface C – 20-pin cable for old models.

Computer Requirement:

Almost 95% laptops on the world with Intel chip (I3/I5/I7 series) and have 4GB memory
How to Install/Configure BMW ICOM USB WIFI D-link?

1. Insert WIFI USB D-link into the computer via USB port

2...

1. Open the BMW’s driver-side door. Look into the leg-space beneath the dashboard. There, you will find 16 pin-receiving Data Link Connector. This DLC outlet is featured in different locations, depending on the model of BMW you are working with. Some may readily seen, but others may be concealed behind an access panel. Should you have trouble locating your BMW’s DLC outlet, there is an online application that could assist (see Resources).
2. Clone BMW ICOM A+B+C BMW ISIS ISID is BMW OBD complete diagnostic system for programming, diagnosing and coding. BMW OBD II repair tool have full system replace BMW GT1, BMW OPS, BMW OPPS. All BMW series can be processed with the ICOM A, B and C modules.

3 : Connect your BMW ICOM A+B+C diagnostic handheld to the DLC outlet...

BMW ICOM A2+B+C with 2018.09 Software Plus EVG7 Diagnostic Controller Tablet PC

Software Version : V2018.07

ISTA – D: V4.11.30,with SDP data V4.11.30
ISTA – P: 3.64.2 with Engineer Programming
can program F/G/I/K chassis for car (through the ICOM, not other cable )
Vin: V2018.06

BMW ETK: 2018.06
BMW KSD: 2018.05  Multilanguage
BMW FSC Navigation Code Generator
BMWAiCoder for BMW Coding

BMW ICOM A2+B+CFunction:
* Interface A2 – OBD diagnostic supporting MOST, D-CAN and K-CAN protocols.
* Interface B – diagnostic via MOST bus, and have connection to A-interface via USB connection.
* Interface C – 20-pin cable for old models.

Support Multi-language in diagnose and programming, also TIS diagram circuit: American English/ British English/ German/

Spanish/ French/ Italian/ polish/ Portugues...

What is ISTA and what is ISTA+:

ISTA is a workshop system that contains BMW AG Data and Information. ISTA stands for Integrated Service Technical Application. Way back when, during the initial development of this tool, BMW used DIS (Diagnostics Information System), and as the programs evolved and due to the nature of the file naming conventions utilized by BMW, the workshop system became known as Rheingold in the enthusiast world. Rheingold in actuality is the folder that contains the main application and data. Rheingold became ISTA-D (D stands for Diagnostics) and BMW’s programming application (not discussed in this document) used the same nomenclature, ISTA except with a P (for programming) or ISTA-P. This document only discusses ISTA+.

Eventually, based on the direction that the co...

As we all know , MB Star C4/C5 and BMW ICOM are the famous auto diagnostic tools on the market , these the best tool work for Mercedes Benz and BMW vehicles .

Some customers maybe have met the issues “ windows activation “ when running the laptop with our hard disk .

How to do next ?

1. Click “ Ask me later ”

2. Open my computer and D disk

3. Open “ WIN7_Activation ” File

4. Double click Running “Windows Loader.exe”

5. Click “ Install ”

6. After finished the installation , click “ Restart “ , then reboot your laptop will be well

Any other issues , welcome to contact us any time

www.cnautotool.com

BMW ICOM NEXT and BMW ICOM A2 both can work with the same software ISTA-D ISTA-P for the same BMW vehicles. But they are kind of different from some aspects, especially firmware adaption. Such as :

(1) ICOM NEXT Functionally compatible to BMW ICOM A2
(2) ICOM NEXT Mechanical design similar ICOM A2 
(3) ICOM NEXT Backwards compatible to car adapters (BMW ICOM B, C) and motorcycle adapters (ICOM D, E)

(4) ICOM NEXT ABC SPECS:

1. Zeroization of data on tamper detection

2. Secure supply chain assurance

3. Key storage using physically un-clonable function

4. CRI Pass-Through DPA Patent Portfolio

5. Advanced cryptographic Services

(5) Improved Functionality and Performance:

1. Gbit workshop LAN,backwards compatible

2...