Category Car Diagnostic Tools

ercedes Star Diagnosis software 2018.09 Version release work with Mercedes SD Connect C4, SD C5 for SCN coding online no error. 2018.09 Mercedes Star Diagnosis come with Xentry DAS HTT-WIN for Mercedes Benz old & new cars till 2018. What’s the difference of HHT-WIN and Xentry and DAS? why choose 2018.09 Mercedes Star Diagnosis software ? Check the reasons below.

2018.09 Mercedes Star Diagnosis come with Xentry DAS HTT-WIN on windows 7 32 bit  System

2018.09 Xentry diagnosis software is the latest version software available for SCN Coding programming, the software such as Xentry 2017.05, Xentry 2017.09 cannot login for SCN online coding again.

2018...

Autel MaxiScope Automotive Oscilloscope Basic Kit Works with Autel Maxisys MS905 MS906BT MS906TS MS908 MS908P Tool .

The operating software of the MaxiScope is continuously being developed, and the update package can be downloaded free from the MaxiScope product webpage on Autel’s website: http://www.autel.com.

How to update the MaxiScope firmware ?

1.Install the CD provided with the MaxiScope tool kit into the CD-ROM of the computer. The driver installation wizard will load momentarily. 2. Click on Next on the welcome page.

3.Click the Browse button, and select a destination folder to install the program, and click Next to continue. Or directly click Next to continue without changing the default installation folder.

4. Click Install and the Setup...

1. Turn on the Auro OtoSys IM600 , click “OtoSys “→”IMMO”

2. Connect to WIFI , then go back the vehicle menu

3. Click “ AUDI “ , then click 2015-2017 vehicle model “ to the “function select” , choose “ Key Pictures “

4. Click “All keys lost “

5. Proceed as information displayed on the popup window . Then click “ OK “ . reading IMMO data start automatically .

6. Click “ OK “ after reading IMMO data

7. Proceed to make dealer key(s) , click “NO” and proceed as information displayed if you’ve got dealer key(s) . Put the blank keys in the programmer keyhole one by one if you need to make more than one dealer key .

8. Key learning procedures start automatically afer making dealer key(s) successfully ...

Software Version : V2018.09
ISTA – D: 4.12.12,with SDP data 4.12.12
ISTA – P: 3.65.0.500 with Engineer Programming
can program F/G/I/K chassis for car (through the ICOM, not other cable )
Vin: V2018.08

BMW ETK: 2018.08
BMW KSD: 2018.07 Multilanguage
BMW FSC Navigation Code Generator
BMWAiCoder for BMW Coding

BMW ICOM V2018.09 , With free Software:
1. Get engineer version, INPA 5.00,winkfp 5.2.3,NCS 3.5.1, e-sys 3.30.1,data V64.2
2. get Chinese software DR.GINI B020
3. get count code navigation tool software FSC operator code
4. get one-clik hidden brush tool BMWAi V4.6
5. Add DIS Software for Old cars, DISV57 and DISV44,diagnostic and ecu programmer

Top 5 Reasons to Get BMW ICOM A2 with Latest Software

1. BMW ICOM A2 Hardware Version: V2018.07
2...

Porsche piwis tester 2 is the latest inspect equipment of Porsche Company. This is the latest professional tester for Porshe, it is the Next Generation of PIWIS Tester Porsche V18.100 . Piwis Tester II is the latest professional tester for Porshe,the most poweful diagnose and offline programming tool for Porsche,with latest tester for Porsche,powerful functions,full access .

Lastest Version for Porsche Piwis Tester 2 is V18.100 .This is Original Porsche Software , you can free to download from official website.

Porsche Piwis Tester II works with the old and latest Porsche cars from 2005-2015. It is equipped with the CF30 laptop and original software for the test. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars...

This is about Tech 2 Scanner for Hummer troubleshooting and programming.

Can I have a cheap Tech 2 for Hummer?
Yep. Both the original and HQ clone can work for your car.

Where can I get a working clone at a good price?

https://www.cnautotool.com/goods-1568-GM+Tech2+GM+Scanner+-CANdi++TIS.html

Why my Hummer is not shown in the GM vehicle list?
That little short list is incorrect and only shows a few of the earlier than 2007 CAN bus vehicles.

Tech 2 clone for both troubleshooting and programming Hummer?
I’ve used my Tech2 on my 08 many times for troubleshooting not programming
But I think it should be able to program Hummer.

Anyone has good success of Hummer H3?
My H3 has had a CEL on – po452. I checked it with the tech 2...

This post if for those uses with Lonsdor K518ISE failed to connect the machine to any car listed in K518ISE vehicle list. It is possible the OBD cable, or little chance due to the device.For more information,please please visit our website www.cnautotool.com

OBD test cable testing method:

Step 1: Unplug the K518ISE main unit and turn it off

Step 2: Connect the DB25 cable(OBD cable) to k518ISE main unit, using a multimeter and switch to the diode stalls

Pay attention that there are 3 connectors on the OBD cable:

Connector 1: connect K518ISE OBD port;

Connector 2: connect KPROG adaptor

Connector 3: connect the vehicle OBD port

Step 3: Use the red pen to touch the metal part(as shown in pic 2 in red）

Step 4: Use the black pen to test the resistance of each pin of the vehicle connector (A...

GM Tech 2 Scan Tool work for Opel/SAAB/OPEL/SUZUKI/ISUZU before 2012. Vetronix GM Tech 2 comes with Authentic GM

software included Tech2win & Tis2000. CnAutotool.com Client share GM Tech 2 TIS2000 software installation Guide as

follows.

GM Tech 2 SAAB/Opel Tech 2 Scan Tool GM Tech 2 Scanner

My new GM Tech 2 Scan Tool bought from

https://www.cnautotool.com/goods-1568-GM+Tech2+GM+Scanner+-CANdi++TIS.html

It is in perfect working order and has the screen cover.
Also included is the

Diagnostic Scan Tool GM Tech 2 Scan Tool TIS2000 software which you will need to access the

security to program keys

TIS2000 installation guide:

Small glitch running TIS2000, and unless your laptop/computer has an RS232 port to plug the Tech II cable into it, your

going to need an usb cable instead.

Or Here is...

As we all know , FVDI is good car diagnostic tool which with strong functions , it have the good feedback from the market . Recently , there have customers have some problem for it , lets check together .

Problem:
I have FVDI 2015/2016 full from fly company.
After correct connection I have error device not open and now the green led from fvdi is off and the red-green led from soft dongle (red dongle) blink together.
Changed to other usb cable same, tried and with second pc and I have the same error.
And my both pc cannot find the device as if it does not exist.

Solutions :
Don’t run the old FVDI 2014 FVDI 2015 FVDI 2016 Quicker loader software 6.3 version and connect to Server anymore, otherwise the FVDI abrites commander clone devices will be locked...

What is ISTA and what is ISTA+:

ISTA is a workshop system that contains BMW AG Data and Information. ISTA stands for Integrated Service Technical Application. Way back when, during the initial development of this tool, BMW used DIS (Diagnostics Information System), and as the programs evolved and due to the nature of the file naming conventions utilized by BMW, the workshop system became known as Rheingold in the enthusiast world. Rheingold in actuality is the folder that contains the main application and data. Rheingold became ISTA-D (D stands for Diagnostics) and BMW’s programming application (not discussed in this document) used the same nomenclature, ISTA except with a P (for programming) or ISTA-P. This document only discusses ISTA+.

Eventually, based on the direction that the co...