Please return following links to the footer:
Designed by Frances Photography, thanks to: WordPress template, Home Birth Tips and WP free themes
CnAutotool-China Car diagnostic tool center

Category Professional Diagnostic Tools

Which Ford key programming is Better ?

Want to know the comparisons for VCM II clone,FLY FVDI J2534 & VCM IDS 3 ? Lets check one customer’s experience as following :

Question :

I just found out that my tools are not enough and need to get one of the tools mentioned to initialize module on 2011+ Ford cars and vans.

I did a lot of key programming, FIP/PCM initialization, on 2001 fords, 2006+, 2010, with Launch/Forscan, but on newer EURO5 cars I can only adapt keys, but can’t initialize the ECU. It asks for incode by outcode, which I do not have access since code generators work until 05/2010 and my tools can’t calculate it.

So, what should I choose ? VCM II clone, FLY FVDI J2534 or VCM IDS 3 ?

Answer:

VCM II HQ clone is best tool of that bunch, but be aware that you will still need incode/outcode for key/security relat...

Read More

Reviews for SD Connect Clone or OEM (Clone) Xentry Diagnosis VCI C6

New Release mb star c6 support DOIP Xentry Diagnosis VCI C6 have more function than mb star c4

Review 1

SD connectC4 is better VCI Clone works like ecom

Review 2

SDconnect is easy to configure and LED screen helps quickly identify the number, software version and IP address.

Easy to switch from LAN and WiFi mode.

VCI has no screen

Review 3

OEM Xentry Diagnosis VCI C6 experience

This device unlike any other devices . The device “C6″ have a particularly rules first of all the re-seller must send you the driver’s files for each version because it is not like C3 , C4 , C5 devices working with any version.

like, if you have xentry version 12 2018, and you want install “Xentry” versions 05 2019 or 09 2019 , you will have to have the driver files for versions 05 2019 , or 09 2019 from the ma...

Read More

How to Use Vediamo to Programming and Coding for Benz 722.9 Transmission Control Module

How to Use Vediamo to Activate Mercedes Benz SA500 Auto Fold Mirror

Today lets check some instructions for Benz 722.9 TCM EHS Programming & Coding by Vediamo as following :

1.Connect MB SD C4 interface to Benz and run Vediamo software,then select “VEcoute”

We are going to do EHS programming,so here we search “VGS” to find “VGSNAG2″ and click “OK” to connect to ECU

2.After connection build,select “Coding”–>“Flash”

3.Then the current flash state show as below.

Here you need to pay attention on the version of control module,make sure which version to be programmed.If you can not ensure,please use Xentry software to get the control module version.

4.Follow below order to select version file and programmed file,then click “Add” to search file

5.The 722...

Read More

How to Use Vediamo to Activate Mercedes Benz SA500 Auto Fold Mirror

Before you use Vediamo to perform activation operation , you need to finish Benz mechanical fold mirror retrofit

1.Right/Left fold mirror

2.Driver side switch panel (include fold mirror switch)

3.Right/Left door module (After 2010,not need replacement)

Vediamo Activate SA500 Auto Fold Mirror:

1.Connect Benz MB SD diagnostic tool to vehicle OBD port,then run Vediamo software.

2.After connection build connection,click “V-Ecoute”

 

3.Select “System”

4.Change folder

5.Broswe model cbf,example:204cbf

6.Select “CGW_204″

7.Click “OK” to continue

 

8.Double click to connect to control module

9.Select “Coding”–>“Variant Coding”

 

9.Select “VCD_02_global_variant_coding” from service options

10.Select “500 spiegelanklappung not available” from “Current Coding” options

11...

Read More

ALLDATA 10.53 Auto Repair Software Support Car List

Alldata 10.53 crack software support cars from 1982 to 2014. 

Professional repair shops need current, factory-correct information to meet the complex repair demands of today`s automotive industry.
ALLDATA shops have fast access to the industry`s best information for vehicles from 1982 to2014 including TSBs, maintenance schedules, manufacturer recall information, OE solutions, and factory images and diagrams.
ALLDATA , the leading computer-based diagnostic, repair and estimating information system, help you boost shop performance and build customer loyalty as you efficiently repair more makes and reduce comebacks.
Alldata 10.53 Crack Software Overview:
Software Version: 2014
OS Requirement: WinXP
Language: EN (USA)
Crack/SN: Crack
File Format: 750G external hard drive
Covers cars and light...

Read More

Mut 3 Mut III MUT-3 Mitsubishi Diagnostic Scanner FAQS

Want to know more about MUT 3 diagnostic tool ? Lets check some FAQs as bellow :

What is MUT-3 ?
MUT stands for Multi-Use-Tester.
The MUT-3 can perform a variety of functions including rewriting the vehicles ECU, rewriting the vehicles TCM, reading diagnosis codes, and clearing diagnosis codes.

What is the difference between the USD$415 and USD$748 Chinese mut 3 and What is the function of the cf car includes in some mut3
There have no generic answer as that totally depends on vendors, etc. Pick two actual auctions or items for sale and compare those two.

There are usually two flavors available – one that reads codes and stuff and the other that is capable of doing programming. The programming units are usually a higher price.

How to install Mitsubishi MUT 3 Software on Windows 7 ?
Pleas...

Read More

How to install Mitsubishi MUT 3 Software on Windows 7 ?

MUT3 PC requirements:

Operating System: Windows 7 Professional 32/64-Bit
Memory: 4GB (1x4GB) 1600MHz DDR3L Memory
Hard Drive: 500GB (5400rpm) Serial ATA Hard Drive
Processor: Intel Core Intel Core i3-4010U Processor (1.7GHz, 3M cache)

Some of the Mitsubishi MUT3 functions are passworded and those passwords are usually matched to the MDB password fields included in the updates. Which vary by distribution, version and locale. Get a MS Access password cracker and run it on the MDB files in your distribution to learn the passwords.

The Teach-In Function requires a certain version, or later, of the TCU firmware to be installed in the desired TCU...

Read More

BMW ICOM Software Updated to 2019.09 ISTA-D ISTA 4.19.12 ISTA-P 3.66.2.002

BMW ICOM software have updated recently , all update information details as bellow :

Software Version : V2019.09

ISTA – D: 4.19.12,with SDP Programming Database 4.19.13

ISTA – P: 3.66.2.002 with Engineer Programming,supports the programming of BMW motorcycles and electric vehicles can program F/G/I/K chassis for car (through the ICOM, not other cable )

Vin: V2019.08

BMW ETK: 2019.08

BMW KSD: 2019.08 Multilanguage

BMW FSC Navigation Code Generator
BMWAiCoder for BMW Coding

BMW ICOM V2019.09, With free Software:
1. Get engineer version, INPA 5.00,winkfp 5.2.3,NCS 3.5.1, e-sys 3.30,data V66.2
2. get Chinese software DR.GINI B020
3. get count code navigation tool software FSC operator code
4. get one-click hidden brush tool BMWAi V4.6
5...

Read More

Remove & Replace Benz Electrical Ignition Switch ( EIS ) Instructions

The ignition switch on your Mercedes is coded to the vehicle, so you will have to reprogram the system for the computer to recognize it. The switch itself is easy to remove but you must first remove the steering wheel, steering column tube module and the trim around the gauge cluster.

Applies to : C350 (2007-14), C180 (2007-14), C200 (2007-14), C230 (2007-14), C250 (2007-14), C280 (2007-14), C300 (2007-14), C320 (2007-14)

Today , lets introduce how to replace Benz W204 electrical ignition switch as following :

The switch itself is easy to remove but you must first remove the steering wheel (red arrow) steering column tube module (yellow arrow) and the trim around the gauge cluster (green arrow).

Please remember before removing the airbag and steering wheel to disconnect the ground cable ...

Read More

Instructions for i-HDS Diagnostic & J2534 Reprogramming Software

What is the i-HDS software ? Its Honda Diagnostic System software by American Honda Motor Co., Inc. It’s used for the diagnosis and repair of electronic systems on Honda and Acura automobiles, and for the reprogramming of electronic control units (including, but not limited to, ECMs and PCMs). This software provides access to all Honda and Acura vehicle systems (access to the immobilizer security system requires a Security Professional level software subscription and Vehicle Security Professional [VSP] registration with NASTF). To use the i-HDS software, you need to purchase one of our convenient subscription options. In addition, you will need a pass-thru Vehicle Communication Device (VCI) that is compliant with SAE J2534-1 and J2534-2 in order to communicate with the vehicle.

Vehicle C...

Read More