{"id":11331,"date":"2022-01-01T10:46:06","date_gmt":"2022-01-01T10:46:06","guid":{"rendered":"https:\/\/www.cnautotool.com\/blog\/?p=11331"},"modified":"2022-01-03T10:49:59","modified_gmt":"2022-01-03T10:49:59","slug":"caterpillar-950f-excavator-air-filter-primary-element-clean-and-replace","status":"publish","type":"post","link":"https:\/\/www.cnautotool.com\/blog\/caterpillar-950f-excavator-air-filter-primary-element-clean-and-replace\/","title":{"rendered":"Caterpillar 950F Excavator Air Filter Primary Element Clean and Replace"},"content":{"rendered":"

This instruction show you guide on how to clean and repair air filter primary element for Caterpillar 950F excavator. More repair case for CAT machine,please refer to:Caterpillar Trouble Repair<\/a>.<\/p>\n

\"\"<\/a><\/p>\n

Related Contents:<\/strong><\/p>\n

Caterpillar SIS 2021 2019 2018 Full EPC+Service Manual Free Download<\/a>
\nCaterpillar ET 2021B 2019C 2018A Electronic Technician Software Free Download<\/a><\/p>\n

Procedures:<\/strong><\/p>\n

1.The air filter is located on the right side of the machine.<\/p>\n

\"\"<\/a><\/p>\n

2.Remove cover (1) from the air filter housing.<\/p>\n

3.Remove primary element (2) from the air filter housing.<\/p>\n

\"\"<\/a><\/p>\n

4.Clean the inside of the air filter housing.<\/p>\n

5.Inspect the primary element. If the pleats, the gaskets, or the seals are damaged, discard the element and replace the element with a clean primary element.<\/p>\n

NOTICE<\/p>\n

Do not clean the primary elements by bumping or tapping them. Do not use primary elements with damaged pleats, gaskets or seals. Engine damage can result.<\/p>\n

Make sure the cleaned primary elements are completely dry before installing them into the filter housing.<\/p>\n

Water remaining in the elements can cause false indications of contamination in S\u00b7O\u00b7S Analysis test results.<\/p>\n

6.If the primary element is not damaged, clean the primary element.<\/p>\n

The primary element can be cleaned by using the following methods:<\/p>\n

Pressure air
\nPressure water
\nDetergent washing<\/p>\n

Note: If the element has been used for one year or the element has been cleaned for the sixth time,replace the primary element.<\/p>\n

\"\"<\/a><\/p>\n

7.When you clean the inside pleats and the outside pleats, direct the air or the water along the pleats.<\/p>\n

If you use pressure air, the maximum air pressure is 205 kPa (30 psi). If you use pressure water,<\/p>\n

the maximum water pressure is 280 kPa (40 psi).<\/p>\n

The primary element can be washed in warm water with a nonsudsing household detergent.<\/p>\n

Fully rinse the pleats. Allow the primary element to air dry completely.<\/p>\n

\"\"<\/a><\/p>\n

8.Inspect the primary element after you clean the element. Do not use an element if the pleats, the gaskets or the seals are damaged.<\/p>\n

9.Cover the clean primary element. Store the element in a clean, dry location.<\/p>\n

10.Install a clean primary element.<\/p>\n

11.Clean the cover and install the cover on the air filter housing. Fasten the clips in order to secure the cover.<\/p>\n

12.Close the engine access door.<\/p>\n","protected":false},"excerpt":{"rendered":"

This instruction show you guide on how to clean and repair air filter primary element for Caterpillar 950F excavator. More repair case for CAT machine,please refer to:Caterpillar Trouble Repair. Related Contents: Caterpillar SIS 2021 2019 2018 Full EPC+Service Manual Free… Continue Reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":11336,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[2036,748],"tags":[103,1033,752,751,1096,753],"_links":{"self":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/11331"}],"collection":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/comments?post=11331"}],"version-history":[{"count":2,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/11331\/revisions"}],"predecessor-version":[{"id":11338,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/11331\/revisions\/11338"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/media\/11336"}],"wp:attachment":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/media?parent=11331"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/categories?post=11331"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/tags?post=11331"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}