{"id":12637,"date":"2022-05-02T09:50:20","date_gmt":"2022-05-02T09:50:20","guid":{"rendered":"https:\/\/www.cnautotool.com\/blog\/?p=12637"},"modified":"2023-08-11T02:12:49","modified_gmt":"2023-08-11T02:12:49","slug":"how-to-remove-and-install-heated-oxygen-sensor-1-for-isuzu-rj05-4jj3-awr6b45-truck","status":"publish","type":"post","link":"https:\/\/www.cnautotool.com\/blog\/how-to-remove-and-install-heated-oxygen-sensor-1-for-isuzu-rj05-4jj3-awr6b45-truck\/","title":{"rendered":"How to remove and install heated oxygen sensor 1 for ISUZU RJ05 4JJ3 AWR6B45 truck"},"content":{"rendered":"

This instruction show you guide on how to remove and install heated oxygen sensor 1 for ISUZU RJ05 4JJ3 AWR6B45 truck. More ISUZU repair,please refer to:ISUZU Trouble Repair<\/a>.<\/p>\n

Preparations:<\/strong>
\nIsuzu G-IDSS Export Diagnostic Software Free Download<\/a><\/p>\n

Procedures:<\/strong>
\n1) Open the engine hood.
\n2) Disconnect the battery cable from the battery negative terminal.<\/p>\n

Caution:<\/strong><\/p>\n

After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.<\/p>\n

If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.<\/p>\n

If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP\/AUTO DOWN function after connecting the battery negative terminal.<\/p>\n

Heated Oxygen Sensor 1 Removal<\/p>\n

1)Disconnect the connector from heated oxygen sensor 1.<\/p>\n

2)Remove heated oxygen sensor 1 from the DPD.<\/p>\n

\"\"<\/a><\/p>\n

Legend<\/p>\n

Exhaust gas temperature sensor 2 (Front of LNT catalyst)<\/p>\n

Heated Oxygen Sensor 1 Installation<\/p>\n

1) Clean the old anti-seize lubricant on the sleeve nut, and apply new anti-seize lubricant to the threaded portion of the heated oxygen sensor 1 sleeve nut.<\/p>\n

Note:
\n* If the heated oxygen sensor is replaced with a new one, it is not necessary to apply new anti-seize lubricant.<\/p>\n

Caution:
\n* Apply Never-Seez High Temperature Stainless Grade 5-87411-039-0 by Bostik of USA as the anti-seize lubricant.
\n* Do not allow paint, lubricant, dust, etc., to adhere to the sensor.
\n* When replacing the heated oxygen sensor with a new one, immediately install it to the exhaust pipe after removing the sensor protection cap.<\/p>\n

2) Install heated oxygen sensor 1 to the DPD.<\/p>\n

Tightening torque: 50 N\u30fbm { 5.1 kgf\u30fbm \/ 37 lb\u30fbft }<\/p>\n

\"\"<\/a><\/p>\n

Legend<\/p>\n

Heated oxygen sensor 1<\/p>\n

Exhaust gas temperature sensor 2 (Front of LNT catalyst)<\/p>\n

3) Connect the connector to heated oxygen sensor 1<\/p>\n

Notice:You need perform ECM learned value clear and relearning after replacing the heated of oxygen sensor.<\/p>\n","protected":false},"excerpt":{"rendered":"

This instruction show you guide on how to remove and install heated oxygen sensor 1 for ISUZU RJ05 4JJ3 AWR6B45 truck. More ISUZU repair,please refer to:ISUZU Trouble Repair. Preparations: Isuzu G-IDSS Export Diagnostic Software Free Download Procedures: 1) Open the… Continue Reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":12640,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[1953],"tags":[],"_links":{"self":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/12637"}],"collection":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/comments?post=12637"}],"version-history":[{"count":3,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/12637\/revisions"}],"predecessor-version":[{"id":14918,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/12637\/revisions\/14918"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/media\/12640"}],"wp:attachment":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/media?parent=12637"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/categories?post=12637"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/tags?post=12637"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}