{"id":13575,"date":"2022-07-22T14:06:44","date_gmt":"2022-07-22T14:06:44","guid":{"rendered":"https:\/\/www.cnautotool.com\/blog\/?p=13575"},"modified":"2022-10-04T14:10:52","modified_gmt":"2022-10-04T14:10:52","slug":"ultraprog-power-peripheral-panel-description","status":"publish","type":"post","link":"https:\/\/www.cnautotool.com\/blog\/ultraprog-power-peripheral-panel-description\/","title":{"rendered":"Ultraprog Power Peripheral Panel Description"},"content":{"rendered":"

Power Source<\/strong>
\nBefore power up the interface, please read and study the technical specifications, if you didn\u2019t use the UltraProg interface with certified power supply. Every UltraProg interface is fully tested for all functions before sell to end-users.<\/p>\n

UltraProg interface is protected against apply opposite polarity DC voltage and also it has Fast 1000mA 5x20mm glass fuse inside.<\/p>\n

After power on the green LED must lit, on the interface, otherwise power voltage is too low, or maybe the unit or fuse is faulty.<\/p>\n

Power LED may blinking or switched off temporarily during in operation. This is normal behavior, and not means any fault of the interface.<\/p>\n

Description of PC and Power panel
\nOn below pictures please see the pinout:<\/p>\n

\"\"<\/a><\/p>\n

USB-B: Please connect this with USB A-B cable to any free port of your PC<\/p>\n

Power LED: This LED lamp must be lit, when unit is powered up. Also during in operation,may blinks, or dark for a short time.<\/p>\n

Reset: This is a button to restart your interface, especially when update the firmware DC Power: Apply the DC power in here (center pin is positive)<\/p>\n

Description of Peripheral Panel<\/p>\n

\"\"<\/a><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
UltraProg Pin<\/td>\nDescription<\/td>\nDirection<\/td>\n<\/tr>\n
1<\/td>\nRS485 B<\/td>\nI<\/td>\n<\/tr>\n
2<\/td>\nRS485 A<\/td>\nO<\/td>\n<\/tr>\n
3<\/td>\n+5V tied with 10k to internal Vcc<\/td>\nO<\/td>\n<\/tr>\n
4<\/td>\n+5V tied with 10k to internal Vcc<\/td>\nO<\/td>\n<\/tr>\n
5<\/td>\nGND tied to ground<\/td>\nGND<\/td>\n<\/tr>\n
6<\/td>\nNot Connected<\/td>\nNC<\/td>\n<\/tr>\n
7<\/td>\nReset output for microcontrollers<\/td>\nO<\/td>\n<\/tr>\n
8<\/td>\nGeneral port TTL level<\/td>\nI\/O<\/td>\n<\/tr>\n
9<\/td>\nGeneral port TTL level<\/td>\nI\/O<\/td>\n<\/tr>\n
10<\/td>\nK-line for diagnostics interface<\/td>\nI\/O<\/td>\n<\/tr>\n
11<\/td>\n+9,1V output<\/td>\nO<\/td>\n<\/tr>\n
12<\/td>\n+12V output with on\/off function<\/td>\nO<\/td>\n<\/tr>\n
13<\/td>\nNot Connected<\/td>\nNC<\/td>\n<\/tr>\n
14<\/td>\n+5V output (Common with system)<\/td>\nO<\/td>\n<\/tr>\n
15<\/td>\nGeneral port TTL level<\/td>\nI\/O<\/td>\n<\/tr>\n
16<\/td>\nGeneral port TTL level<\/td>\nI\/O<\/td>\n<\/tr>\n
17<\/td>\nGeneral port TTL level<\/td>\nI\/O<\/td>\n<\/tr>\n
18<\/td>\nGeneral port TTL level<\/td>\nI\/O<\/td>\n<\/tr>\n
19<\/td>\nGeneral port TTL level<\/td>\nI\/O<\/td>\n<\/tr>\n
20<\/td>\nGeneral port TTL level<\/td>\nI\/O<\/td>\n<\/tr>\n
21<\/td>\nGeneral port TTL level<\/td>\nI\/O<\/td>\n<\/tr>\n
22<\/td>\nGeneral port TTL level<\/td>\nI\/O<\/td>\n<\/tr>\n
23<\/td>\nGeneral port TTL level<\/td>\nI\/O<\/td>\n<\/tr>\n
24<\/td>\nGeneral port TTL level<\/td>\nI\/O<\/td>\n<\/tr>\n
25<\/td>\nGND tied to ground<\/td>\nGND<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

www.cnautotool.com<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

Power Source Before power up the interface, please read and study the technical specifications, if you didn\u2019t use the UltraProg interface with certified power supply. Every UltraProg interface is fully tested for all functions before sell to end-users. UltraProg interface… Continue Reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":13576,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[8],"tags":[2222],"_links":{"self":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/13575"}],"collection":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/comments?post=13575"}],"version-history":[{"count":3,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/13575\/revisions"}],"predecessor-version":[{"id":13580,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/13575\/revisions\/13580"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/media\/13576"}],"wp:attachment":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/media?parent=13575"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/categories?post=13575"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/tags?post=13575"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}