\nThe new version of New Holland CNH EST works with OS Windows 10 64-bit and Windows 11 64-bit PRO, except the Home edition).<\/p>\n
Check the status of parameters; Windows 7 32 bit, Windows 7 64 bit, Windows 8\/8.1 32 bit, Windows 8\/8.1 64 bit, Windows 10 32 bit, Windows 10 64 bit<\/p>\n English, Spanish, Italian, Mexican, German, Norwegian, Russian, French<\/p>\n New Holland (Agriculture and Construction); New Holland Electronic Service Tool 9.1 Download:<\/strong> New Holland Electronic Service Tools 9.2(CNH EST 9.2) software<\/strong> New Holland Electronic Service Tools 9.14 100% Work<\/strong> CNH EST 9.14 + ETimGo Full 8.21 2025 Install + Active<\/strong> New Holland (Agriculture and Construction); The CNH DPA5 Kit Diagnostic Interface<\/a> is NOT<\/strong> included.<\/p>\n CNH EST 9.8.0.0.0 installation file, Optionally, you can purchase\u00a0eTimGo for CNH EST 02.2024 for all brands OFFLINE<\/a>,\u00a0which is a completely offline repair and diagnostics information database, with PIN search support.<\/p>\n NOTE: EST 9.3.0.0 will timeout on July 31st, 2021. All support for Windows 7 and 8.x will be closed.<\/p>\n – EST PC Operating System (OS) and hardware requirements<\/p>\n Minimum Specifications: <\/p>\n – Vehicle PIN Management The release of the Electronic Service Tool (EST) 9.7.0.0 and the new eTIM software includes several improvements to the service tool software. These changes include: <\/p>\n CNH EST 9.7.0.0.0 installation file, CNH EST 9.6.0.0.0 installation file, EST 9.6.0.0 New Features<\/p>\n The release of the Electronic Service Tool (EST) 9.6.0.0 includes several improvements to the service tool software. These changes include: Minimum Specifications<\/em>:<\/strong> – New diagnostic adapter support<\/strong><\/p>\n The EST9600 base software introduces support for a new diagnostic adapter to interface with CNHi equipment. – Legacy Diagnostics download and installation<\/strong><\/p>\n The new legacy troubleshooting database is released and will be available with the\u00a0EST9600 software.<\/p>\n The release of the Electronic Service Tool (EST) 9.5.0.0 and new eTIM software includes several improvements to increase the ability of the user to service and diagnose equipment. These changes include: CNH EST 9.5.0.0.0 installation file, CNH EST 9.4.0.0.0 installation file, CNH EST 9.3.0.0.0 installation file, New Holland Electronic Service Tool 9.2 Update: -New Engine Datasets for the following Machines with FPT engines Case CE Heavy: New Holland CE Heavy: New Holland CE Light: What is New Holland Electronic Service Tool? Electronic Service Tool (EST) Engineering Level* (software only) \u2013 used by New Holland dealer technicians to connect with vehicles that have a Controller Area Network (CAN) BUS.\u00a0 CNH Electronic Service Tool 9.12 Diagnostic… Continue Reading ![\"\"](\"https:\/\/www.cnautotool.com\/blog\/wp-content\/uploads\/2025\/10\/cnh-est-9.14-software.jpg\")
<\/a><\/p>\nNew Holland Electronic Service Tool Function List:<\/h2>\n
\n\u2022 Retrieve faults;
\n\u2022 Run diagnostic tests;
\n\u2022 Make ECU and parameter programming;
\n\u2022 Monitor active and logged diagnostics;
\n\u2022 View and change ECU configuration;
\n\u2022 View diagnostic procedures and schematics.
\n\u2022 Troubleshoot problems;
\n\u2022 Use assist database;
\n\u2022 Run scope diagnostics;<\/p>\nNew Holland Electronic Service Tool Support OS:<\/h2>\n
New Holland Electronic Service Tool Support Languages:<\/h2>\n
New Holland Electronic Service Tool Supported Brands:<\/h2>\n
\nNew Holland FK (Fi at-Kobelco);
\nNew Holland O&K (Orenstein & Koppel);
\nCASE (Agriculture and Construction);
\nSTEYR;
\nKOBE-LCO;
\nIveco (Astra) (articulated dump trucks only);
\nFlexi-Coil;
\nSumitomo (S.H.I.)<\/p>\nCNH EST Software Download<\/h2>\n
\nhttps:\/\/mega.nz\/#F!WVghzKwY!anc22uzd2t41QLiGgAt88Q<\/p>\n
\nhttps:\/\/mega.nz\/#F!2UpnhLSL!b7ptTfnUtQzjRdcef2_z3Q<\/p>\n
\nhttps:\/\/www.cnautotool.com\/goods-7312-CNH-EST-Diagnostic-Software-and-ETimGo-OFFLINE-Repair-Manual.html<\/a><\/p>\n
\nType of software: Repair manual, Diagnostic Software
\nMake: Case, Kobelco, New Holland
\nRegion: WorldWide
\nOS: Window 10 64bit<\/p>\nElectronic Service Tool Software CNH EST 9.14 Supported brands:<\/h2>\n
\nNew Holland FK (Fi at-Kobelco);
\nNew Holland O&K (Orenstein & Koppel);
\nCASE (Agriculture and Construction);
\nSTEYR;
\nKOBELCO;
\nIveco (Astra) (articulated dump trucks only);
\nFlexiCoil;
\nSumitomo (S.H.I.)<\/p>\n![\"\"](\"https:\/\/www.cnautotool.com\/blog\/wp-content\/uploads\/2025\/10\/CNH-EST-9.13.jpg\")
<\/a><\/p>\nThe software EST v9.13 comes as:<\/h2>\n
\n
The software EST v9.9 comes as:<\/h2>\n
\n
The software EST v9.8 comes as:<\/h2>\n
\nCNH EST 9.8.0.0.2 (EST9800Up1) update,
\nCNH EST 9.8.0.0.3 (EST9800Up2) update,
\nCNH EST 9.8.0.0.4 (EST9800Up3) update,
\nCNH EST 9.8.0.0.5 (EST9800Up4) update,
\nCNH EST 9.8.0.0.6 (EST9800Up5) update,
\nCNH EST 9.8.0.0.7 (EST9800Up6) update
\nController Package v113 (09\/2023),
\nEASY Software installation package (E.A.S.y – additional engine diagnostic and download tool for connection directly to ECU to perform diagnostic, programming and ECU reload by K-Line protocol),
\nNew Legacy Diagnostics database for Troubleshooting,
\nPC locked activation
\nTeamviewer remote assistance with setup & activation<\/p>\nEST 9.8.0.0 New Features<\/h2>\n
\nProcessor:
\nIntel Core i5 6th gen Processor or higher (Laptop must be manufactured in last 5 years)
\nRAM Memory:
\n8 GB or greater
\nOperating System:
\nWindows OS: Windows 10 64-bit or Windows 11 64-bit
\nHard Drive:
\n250 GB or greater – Solid State Drive (SSD) is recommended for improved performance
\nPorts:
\nOne 9-pin Serial port (preferred) OR USB to RS-232 Converter – FTDI Chipset) 380003514
\nUSB to RS232 adapter
\nTwo USB ports \u2022 Ethernet port
\nWiFi 802.11b \/ g \u2022 Bluetooth \u2022 Mobile Wireless – Recommended<\/em><\/p>\n
\n– Diagnostic Tool Manager (DTM)
\n– PRO 700 Plus \/ IntelliView IV Plus display support
\n– Engine download request faults update
\n– DATAR updates
\n– New Equipment selections in EST
\n– Straight Tracking Calibration<\/p>\nEST 9.7.0.0 New Features<\/h2>\n
\n– EST PC Operating System (OS) and hardware requirements
\n– Windows 11 support
\n– EST Software Installation and licensing
\n– DPA5 Hardware and Firmware updates
\n– EASy ECU programming crashing
\n– New Models in EST9700<\/p>\nThe software EST v9.7 comes as:<\/h2>\n
\nCNH EST 9.7.0.0.2 (EST9700Up1) update,
\nCNH EST 9.7.0.0.3 (EST9700Up2) update,
\nCNH EST 9.7.0.0.4 (EST9700Up3) update,
\nCNH EST 9.7.0.0.5 (EST9700Up4) update,
\nController Package v91 (01\/2023),
\nEASY Software installation package,
\nNew Legacy Diagnostics database for Troubleshooting,
\nPC locked activation
\nTeamviewer remote assistance with setup & activation<\/p>\nThe software EST v9.6 comes as:<\/h2>\n
\nCNH EST 9.6.0.0.2 (EST9400Up1) update,
\nCNH EST 9.6.0.0.3 (EST9400Up2) update,
\nCNH EST 9.6.0.0.4 (EST9400Up3) update,
\nCNH EST 9.6.0.0.5 (EST9400Up4) update,
\nCNH EST 9.6.0.0.6 (EST9400Up5) update,
\nCNH EST 9.6.0.0.7 (EST9400Up6) update,
\nCNH EST 9.6.0.0.8 (EST9400Up7) update,
\nCNH EST 9.6.0.0.9 (EST9400Up8) update,
\nCNH EST 9.6.0.0.10 (EST9400Up9) update,
\nCNH EST 9.6.0.0.11 (EST9400Up10) update,
\nCNH EST 9.6.0.0.12 (EST9400Up11) update,
\nController Package v78 (08\/2022),
\nEASY Software installation package,
\nNew Legacy Diagnostics database for Troubleshooting,
\nPC locked activation
\nTeamviewer remote assistance with setup & activation<\/p>\nWhat\u2019s new with EST 9.6.0.0<\/h2>\n
\n– EST PC Operating System (OS) and hardware requirements<\/strong><\/p>\n
\nProcessor:
\nIntel Core i5 6th Gen Processor or higher (Manufactured in 2015 or later)
\nRAM Memory:
\n8 GB or greater
\nOperating System:
\nWindows OS: Windows 10 64-bit Note: A 64-bit operating system is mandatory
\nHard Drive:
\n250 GB or greater – Solid State Drive (SSD) is recommended for improved performance
\nPorts required for adapter connection:
\nOne 9 pin Serial port (preferred) OR USB to RS-232 Converter – (FTDI Chipset) 380003514 \u2013 USB to RS232 adapter<\/p>\n
\nEST9600 will support both the DPA5 and CoreXS and allow for easy conversion between these two diagnostic adapters.
\nTo view the connector selection with EST9600, click Communications in the top ribbon.
\nIn the dropdown menu, hover over the Communications Adapter Selection.<\/p>\nWhat\u2019s new with EST 9.5.0.0<\/h2>\n
\n– EST PC OS and hardware requirements
\n– EST Software Installation
\n– Equipment Auto-Detection Support
\n– EASy Software Management
\n– EASy Injector Cutout Test Improvements<\/p>\nThe software EST v9.5 comes as:<\/h2>\n
\nCNH EST 9.5.0.0.2 (EST9400Up1) update,
\nCNH EST 9.5.0.0.3 (EST9400Up2) update,
\nCNH EST 9.5.0.0.4 (EST9400Up3) update,
\nCNH EST 9.5.0.0.5 (EST9400Up4) update,
\nCNH EST 9.5.0.0.6 (EST9400Up5) update,
\nCNH EST 9.5.0.0.7 (EST9400Up6) update,
\nCNHSupportUpdate_27790_3_2_10,
\nEasyNETMainProgram_27787_10_18_1,
\nECM_MD1CS069_DA_FPT_27696_0_45_7,
\nEDC16C39_P_CNH_1_3_SETUP_28684_1_10_1,
\nEDC17CV41_CAN_D_CNH_Setup_29247_0_16_1,
\nEDC17CV41_DA_CNH_28427_1_4_6,
\nEDC17CV41_VECTOR_DatiMemorizzatiMuda_IV_setup_23505_1_19_6,
\nMD1_ET_28410_0_3_1,
\nMD1CS069_DatiMemorizzati_setup_27994_1_2_4,
\nMD1CS069_DB_27950_0_2_1,
\nMD1CS069_DB_28493_0_4_7,
\n16.1.1.0
\nEST Legacy Diagnostics package,
\nVehicle Controller Files v67 (03\/2022 date of update)
\nPC locked activation
\nTeamviewer remote assistance with setup & activation<\/p>\nThe software EST v9.4 comes as:<\/h2>\n
\nCNH EST 9.4.0.0.2 (EST9400Up1) update,
\nCNH EST 9.4.0.0.3 (EST9400Up2) update,
\nCNH EST 9.4.0.0.4 (EST9400Up3) update,
\nCNH EST 9.4.0.0.5 (EST9400Up4) update,
\nVehicle Controller Files v46,
\nLegacy Multilanguage Diagnostic Procedures installer,
\nOptionally, by request, with Additional assistant Programs,
\nPC Locked Activation tool with the engineering access level.<\/p>\nThe software EST v9.3 comes as:<\/h2>\n
\nCNH EST 9.3.0.0.2 – 9.3.0.0.7 (EST9300Up5) updates,
\nLegacy Multilanguage Diagnostic Procedures installer,
\nOptionally, by request, with Additional assistant Programs,
\nPC Locked Activation tool with the engineering access level.<\/p>\n
\nCase IH AG:
\n-New Engine Datasets for the following Machines with FPT engines
\noEDC17C49 Engine Controller Datasets
\n\u20225802804074 -FARMALL 55A (Tier 4A)
\n\u20225802804075 -FARMALL 65A (Tier 4A)
\n\u20225802804076 -FARMALL 75A (Tier 4A)
\nNew Holland AG:<\/p>\n
\noEDC17C49 Engine Controller Datasets
\n\u20225802804074 -T4S.55 \/ WORKMASTER55 \/ T3.60F (Tier 4A)
\n\u20225802804075 -T4S.65 \/ WORKMASTER 65 \/ T3.70F (Tier 4A)
\n\u20225802804076 -T4S.75 \/ WORKMASTER 75 \/ T3.80F(Tier 4A)<\/p>\n
\n-Wheel Loaders (Models 521G, 621G, 721G, 821G, 921G, 1021G, 1121G) (Tier 4B \/ Tier 2)
\noColor Display-Vehicle Support (GDSP) software version 1.11.0.0; part number 51447685<\/p>\n
\n-Wheel Loaders (Models W110D, W130D, W170D, W190D, W230D, W270D, W300D) (Stage V)
\noColor Display-Vehicle Support (GDSP) software version 1.11.0.0; part number 51447685<\/p>\n
\n-Wheel Loaders (Models W110D, W130D, W170D, W190D, W230D, W270D, W300D) (Stage V)
\noColor Display-Vehicle Support (GDSP) software version 1.11.0.0; part number 51447685<\/p>\n","protected":false},"excerpt":{"rendered":"