{"id":13945,"date":"2022-12-09T11:34:24","date_gmt":"2022-12-09T11:34:24","guid":{"rendered":"https:\/\/www.cnautotool.com\/blog\/?p=13945"},"modified":"2022-12-27T12:51:46","modified_gmt":"2022-12-27T12:51:46","slug":"programming-engine-cooling-fan-for-on-highway-trucks-caterpillar-engines","status":"publish","type":"post","link":"https:\/\/www.cnautotool.com\/blog\/programming-engine-cooling-fan-for-on-highway-trucks-caterpillar-engines\/","title":{"rendered":"Programming Engine Cooling Fan for On-Highway Trucks (Caterpillar Engines)"},"content":{"rendered":"

Engine Cooling Fan<\/strong><\/p>\n

\"\"<\/a><\/p>\n

(A). Accessing the Configuration on CAT ET Software<\/a> – Input Selections and Output Selections:
\n1). Fan Control Type
\nThe Fan Control Type parameter determines if the ECM is used to operate the Engine Cooling Fan, this parameter must be programmed to “On\/Off”, to “Three-Speed Fan”, or to “Variable Speed Fan Option S”. This parameter must be programmed to “None” if the ECM is not operating the Cooling Fan relay or the Cooling Fan Solenoid.<\/p>\n

\"\"<\/a><\/p>\n

#Alternatives:
\n\u2192None
\n\u2192On\/Off PWM
\n\u2192On\/Off DC
\n\u2192Three-Speed Fan PWM
\n\u2192Three-Speed Fan DC
\n\u2192Variable Speed Fan Option S<\/p>\n

#Advantages:
\nWhen the Engine ECM controls the Engine Cooling Fan, there is no need for second set of Coolant Temperature Sensors. Engine ECM fan control also provides additional features, such as Fan with Engine Retarder in High Mode.<\/p>\n

\"\"<\/a><\/p>\n

2). Fan Override Switch
\nThe Fan Override Switch parameter is programmed to identify the Fan Override Switch connection to the ECM. This parameter can be programmed to one of the available hard-wired options or J1939 data-link source inputs. The switch itself allows the Operator to turn on the Cooling Fan at any time, resulting in improved retarding\/braking and Engine cooling.<\/p>\n

\"\"<\/a><\/p>\n

#Alternatives:
\n\u2192None
\n\u2192J1\/P1:7 (Input 4)
\n\u2192J1\/P1:47 (Input 5)
\n\u2192J1\/P1:6 (Input 6)
\n\u2192J1\/P1:46 (Input 7)
\n\u2192J1939 – Body Controller
\n\u2192J1939 – Cab Controller
\n\u2192J1939 – Instrument Cluster<\/p>\n

#Advantages:
\nWhen programmed to one of the input Alternatives, this parameter allows the use of the Fan Override Switch, which results in improved Engine retarding\/braking and Engine cooling.<\/p>\n

\"\"<\/a><\/p>\n

(B). Accessing\u00a0Diagnostic Tests from the Diagnostic menu, and then select Special Tests\u00a0from the submenu. Click Start.<\/p>\n

\"\"<\/a><\/p>\n

\u2192Select On\/Off Cooling Fan – J1\/P1:11. Click Start.<\/p>\n

\"\"<\/a><\/p>\n

\u2192Check the Engine Fan Clutch Solenoid should be activated now.<\/p>\n

\"\"<\/a><\/p>\n

\u2192Click Stop button to stop the selected special test in progress.<\/p>\n

(C). Accessing the Status Tool to check the circuit for the Engine Cooling Fan:
\n#Key switch ON<\/p>\n

\"\"<\/a><\/p>\n

\u2192Engine Speed = 0 rpm
\n\u2192Cooling Fan = Fan On
\n\u2192On\/Off Fan Output – J1\/P1:11 = Off
\n\u2192Engine Coolant Temperature = 91 Deg F
\n\u2192Fan Override Switch – J1\/P1:7 = Off<\/p>\n

#Starts the Engine (Idle Speed) – Engine Fan Auto\/Manual Switch OFF (to Auto Mode)<\/p>\n

\"\"<\/a><\/p>\n

\u2192Engine Speed = 701 rpm
\n\u2192Cooling Fan = Fan Off\u00a0\u2192\u00a0Disengaged
\n\u2192On\/Off Fan Output – J1\/P1:11 = On
\n\u2192Engine Coolant Temperature = 93 Deg F
\n\u2192Fan Override Switch – J1\/P1:7 = Off<\/p>\n

#Engine Run (Idle Speed) – Engine Fan Auto\/Manual Switch ON (to Manual Mode)<\/p>\n

\"\"<\/a><\/p>\n

\u2192Engine Speed = 701 rpm
\n\u2192Cooling Fan =\u00a0Fan On\u00a0\u2192\u00a0Engaged
\n\u2192On\/Off Fan Output – J1\/P1:11 =\u00a0Off
\n\u2192Engine Coolant Temperature = 95 Deg F
\n\u2192Fan Override Switch – J1\/P1:7 =\u00a0On<\/p>\n

#Engine Run (Idle Speed) – Engine Fan Auto\/Manual Switch OFF (to Auto Mode) – Simulate the Engine Coolant Temperature (above 200 Deg F)<\/p>\n

\"\"<\/a><\/p>\n

\u2192Engine Speed = 699 rpm
\n\u2192Cooling Fan =\u00a0Fan On\u00a0\u2192\u00a0Engaged
\n\u2192On\/Off Fan Output – J1\/P1:11 =\u00a0Off
\n\u2192Engine Coolant Temperature = 187-230 Deg F
\n\u2192Fan Override Switch – J1\/P1:7 =\u00a0Off<\/p>\n","protected":false},"excerpt":{"rendered":"

Engine Cooling Fan (A). Accessing the Configuration on CAT ET Software – Input Selections and Output Selections: 1). Fan Control Type The Fan Control Type parameter determines if the ECM is used to operate the Engine Cooling Fan, this parameter… Continue Reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":13946,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[748],"tags":[103,1033,752,751,1096,1034,753],"_links":{"self":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/13945"}],"collection":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/comments?post=13945"}],"version-history":[{"count":2,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/13945\/revisions"}],"predecessor-version":[{"id":13959,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/13945\/revisions\/13959"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/media\/13946"}],"wp:attachment":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/media?parent=13945"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/categories?post=13945"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/tags?post=13945"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}