![\"\"](\"https:\/\/www.cnautotool.com\/blog\/wp-content\/uploads\/2023\/04\/How-to-activate-doosan-dms5.png\")
<\/a><\/p>\n1. Monitoring: You can monitor the current status of equipment installed with Controller (EPOS or VCU).
\n2. Graph Output: The major excavator\/Wheel Loader sensor data will be displayed in a graph format. The data can be saved in the hard disk. You can check the excavator\/Wheel Loader\u2019s performance through data comparison and analysis.
\n3. Force Operation: You can use vehicle diagnosis by forcing Controller (EPOS or VCU) outputs.
\n4. Diagnosis: You can check the real-time and past malfunction history maintained by Controller (EPOS or VCU).
\n5. History Data: You can analyze the work patterns when using an excavator\/Wheel Loader, by checking the operation hours, filter\/oil information, and daily operation information.
\n6. Parameter change protected with code: 18772 (change factory settings). Codes for rpm change\/force operation and flash epos: 11830 and\/or 18675.<\/p>\n
Hardware connection: A separate communication cable is required to establish communication between Controller (EPOS or VCU). and external PC. The communication cable should be connected to the excavator\/Wheel Loader\u2019s maintenance connector and user PC\u2019s Serial port.<\/p>\n
If you need doosan dms5<\/a>, please visit https:\/\/www.cnautotool.com<\/a><\/p>\n","protected":false},"excerpt":{"rendered":" The Doosan Excavator\/Wheel Loader Monitoring Program (also called \u201cDMS-3\u201d) offers the following functions by connecting Controller (EPOS or VCU) with the user\u2019s IBM PC compatible PC. 1. Monitoring: You can monitor the current status of equipment installed with Controller (EPOS… Continue Reading