Direct connection capability from a personal computer to PowerCommand geneset controls,transfer controls,and system controls;For details on devices supported refer Technical Details tab. Convenient programming of configurable inputs in the controllers.<\/p>\n Windows 7,Windows 8,Windows 10 and Windows 11<\/p>\n InPower is suitable for use with Microsoft Windows 2000, InPower operates on the popular Windows \u00ae Explorer format, allowing quick access directly to desired program parameters. InPower allows continuous monitoring of selected values at an operator selected interval. This function is convenient for testing or monitoring of exercise periods. Newest InPower v14.5 Pro +INCAL 2023.06 100% Work<\/p>\n InPower Pro v12.5.2 download More about car & truck repair software<\/a>, please refer to https:\/\/www.cnautotool.com<\/a><\/p>\n","protected":false},"excerpt":{"rendered":" What is InPower? InPower is a special diagnostic software for Cummings generators. You are able to use it to communicate with Cummings generators electronic controls units (ECU\/ECM). InPower Functions: Direct connection capability from a personal computer to PowerCommand geneset controls,transfer… Continue Reading ![\"\"](\"https:\/\/www.cnautotool.com\/blog\/wp-content\/uploads\/2023\/10\/Cummings-Inpower-Pro-14.5.jpg\")
<\/a><\/p>\nInPower Functions:<\/h3>\n
\nPlot critical parameters in a strip chart format, and export data to 3rd party software tools for manipulation and viewing.
\nConfigurable for units of measurement, and level of user access (read only, read\/change values,administrator).
\nGenerates reports of monitored data
\nConnection to generator set or transfer switch controls via modem or to multiple controls via PowerCommand (LonWorks)network.
\nAllows released firmware upgrades on Power Command genset controls.
\nAllows the monitored equipment to send alarm information to a connected computer.
\nSimulate fault conditions in genset controls in compliance to NFPA 110 requirements to demonstrate functionality of the controller and monitoring equipment in a facility.
\nAdjustment of nearly every adjustment parameter within the connected control system, including parameters such as voltage and frequency levels, gains, protection set-points and other values.
\nViewing of equipment history, fault codes, and data associated with fault codes.<\/p>\nInPower Support Systems:<\/h3>\n
InPower Software and hardware requirements:<\/h3>\n
\nWindows XP Pro and Windows NT v6.0. InPower v6.0 does not support Windows 95 or Windows 98 operating systems. See below for further requirements.
\n\u2022 An IBM PC or 100% IBM compatible PC.
\nPC with Windows 2000:
\nMinimum 300 MHz processor
\nMinimum of 128 MB RAM
\nPC with Windows XP Pro or Windows NT v6.0:
\nMinimum 500 MHz processor
\nMinimum 256 MB RAM 1.5 GB hard drive
\n\u2022 Microsoft Internet Explorer v5.5 or higher
\n\u2022 SVGA (1024 x 768) color display
\n\u2022 Windows compatible pointing device and 1010 key enhanced keyboard.
\n\u2022 16X CD-ROM
\n\u2022 InPower Pro version requires one parallel port or one USB port depending on dongle type.
\n\u2022 One free serial communications port.<\/p>\nInPower Typical screens<\/h3>\n
\nSet points are changed by simply double-clicking on the appropriate parameter, typing in the desired value and clicking on enter to change the parameter. The range of acceptable values is displayed by the program.<\/p>\n
\nData can be exported to files compatible with 3 rd party spreadsheet and database programs such as Microsoft Excel.
\nAnother function that is useful for testing is the strip chart recorder. The strip chart recorder continuously monitors selected values and displays them graphically for the operator\u2019s use. The strip chart function allows monitoring of transient voltage and frequency conditions and other
\nAC data to verify generator set performance without use of expensive and complicated test equipment.<\/p>\nInPower Free Download:<\/h3>\n
\nhttps:\/\/mega.nz\/file\/gXQmFCJA#0ImSMvtpisGnEA-BGFRZT4oxciMrNIRwGl_2ihwddxY<\/p>\n