1Switch the ignition on and press and hold alarm reset switch usually on the centre console next to the fog light switch.<\/p>\n
2Switch the ignition off and remove the key from the ignition barrel<\/p>\n
3Turn the ignition on with working key<\/p>\n
4Release the alarm switch and operate it once-this should make the alarm LED to flash twice.<\/p>\n
5Still with the ignition on,operate the lock button on the first remote,the alarm should sound once to confirm.<\/p>\n
6Keep the ignition on and at the same time operate the lock button on the first remote,this hould make the alarm to sound once to confirm<\/p>\n
7Operate the lock button on the second remote fob \u2013 the alarm will beep once ot confirm<\/p>\n
8Switch ignition off<\/p>\n
2008 Proton Gen-2 with ID48 chip Add Key with\u00a0Lonsdor K518ISE<\/a> key programmer in 2 minutes.<\/p>\n Go to Immobilizer->Proton->Select from vehicle->Gen-2-> Program Key<\/p>\n Questions:<\/strong><\/p>\n Q1:I have gen 2 i have two keys one master key with no buttons and the normal 2 button key when i try this i get a beep but nothing else key led flashes so i think its oki as somthig must be registering how come i cant get it to work<\/p>\n A1:Try to start from the very beginning, removing the key from the ignition and manually locking the doors and unlocking them<\/p>\n Q2:Is this for the lock and unlocking of doors buttons on the Key itself? coz my key wont open the doors with the key buttons, i have to physically insert the key in the door to open doors. I bought a new Battery for the key but the problem still continues\u2026.<\/p>\n A2:This is for the remote unlock\/lock functions. You have to have both keys for it to work for some reason. If 1 key doesn\u2019t beep try changing the batteries.\u00a0 I got 2 fresh batteries and it worked fine.<\/p>\n Q3:What to do if you only have one central locking key?<\/p>\n A3:you need two keys to programme the keys.<\/p>\n","protected":false},"excerpt":{"rendered":" This article show a tutorial on how to reprogram a PROTON GEN 2 key.Got this form rang main dealer,hope it can help you. Procedures: 1Switch the ignition on and press and hold alarm reset switch usually on the centre console… Continue Reading ![\"\"](\"https:\/\/www.cnautotool.com\/blog\/wp-content\/uploads\/2020\/02\/How-to-Program-Add-New-Keys-for-PROTON-Gen-2-Manually-2.jpg\" "\\"How-to-Program-Add-New-Keys-for-PROTON-Gen-2-Manually-2\\"")
<\/a>
\n![\"\"](\"https:\/\/www.cnautotool.com\/blog\/wp-content\/uploads\/2020\/02\/How-to-Program-Add-New-Keys-for-PROTON-Gen-2-Manually-3.jpg\" "\\"How-to-Program-Add-New-Keys-for-PROTON-Gen-2-Manually-3\\"")
<\/a>
\n![\"\"](\"https:\/\/www.cnautotool.com\/blog\/wp-content\/uploads\/2020\/02\/How-to-Program-Add-New-Keys-for-PROTON-Gen-2-Manually-4.jpg\" "\\"How-to-Program-Add-New-Keys-for-PROTON-Gen-2-Manually-4\\"")
<\/a><\/p>\n