{"id":3258,"date":"2020-02-26T12:36:14","date_gmt":"2020-02-26T12:36:14","guid":{"rendered":"https:\/\/www.cnautotool.com\/blog\/?p=3258"},"modified":"2021-08-28T03:04:41","modified_gmt":"2021-08-28T03:04:41","slug":"nissan-consult-3-plus-bcm-configuration-guide","status":"publish","type":"post","link":"https:\/\/www.cnautotool.com\/blog\/nissan-consult-3-plus-bcm-configuration-guide\/","title":{"rendered":"Nissan Consult 3 Plus BCM Configuration Guide"},"content":{"rendered":"

This article focus on how to use\u00a0Nissan Consult 3 Plus<\/a> to configure Nissan BCM.Hope it helps,and if you want to know more about Nissan Consult 3 Plus,check:Nissan Consult 3 Plus Projects.<\/p>\n

Related Contents:<\/strong><\/p>\n

Nissan Consult 3 Plus Software Download<\/a><\/p>\n

How to Install Nissan Consult 3 III Plus Diagnostic Software<\/a><\/p>\n

Procedure:<\/strong><\/p>\n

From the Home screen, select the \u201cReprogramming, Configuration\u201d button2<\/p>\n

\"\"<\/a>
\n\"\"<\/a><\/p>\n

Carefully read the Precautions and then tick the \u201cConfirmed instructions\u201d box.Select \u201cNext\u201d.<\/p>\n

Select the correct vehicle and build date. Click on the \u201cSelect\u201d button.Select the \u201cConfirm\u201d button when prompted on the next screen (not shown).<\/p>\n

\"\"<\/a><\/p>\n

The next screen asks for the VIN to be entered. NOTE:Currently the BCM is configured Manually and the VIN is not required.(i) To progress to the next screen, simply enter any letter into the first VIN box.(ii) Select \u201cConfirm\u201d.<\/p>\n

\"\"<\/a><\/p>\n

Select \u201cBCM\u201d.<\/p>\n

\"\"<\/a><\/p>\n

To configure a BRAND NEW BCM to a vehicle (or change any settings) \u2013select the \u201cManual Configuration\u201d option.<\/p>\n

\"\"<\/a><\/p>\n

All settings need to be changed to suit the current vehicle.(i) Click on the drop-down arrows (circled) to make the correct settings for each BCM function.(ii) Once any settings have been changed, click the \u201cNext\u201d button in the RH bottom corner of the screen.<\/p>\n

\"\"<\/a><\/p>\n

An \u201cOK\u201d button will then appear in it?s place. Click this \u201cOK\u201dbutton & then the new settings will be locked into place.<\/p>\n

\"\"<\/a><\/p>\n

If there is any doubt on what to write to the BCM, connect CONSULT to another vehicle of the same specification & utilise the \u201cPrint Screen\u201doption & print off each configuration screen.<\/p>\n

\"\"<\/a><\/p>\n

The configuration of most current models is included on the following pages.<\/p>\n

C11 Tiida(All variants 2006MY >)-2010MY> Ti Hatch \/ Sedan variants with \u201cAUTO A\/C\u201d.-Regardless of Transmission fitted, do not set \u201cTRANSMISSION\u201d as \u201cA\/T\u201d. (otherwise an Alarm will sound when A\/T shift lever is in the \u201cR\u201d position.<\/p>\n

\"\"<\/a><\/p>\n

J10 Dualis(All variants 2008MY>)-List shown right applies from Oct 2009 onwards. For earlier models, PTC HEATER & DTRL does not appear on list. Otherwise the settings shown right apply to all J10 variants.<\/p>\n

\"\"<\/a><\/p>\n

T31 X-TRAIL (All variants 2007MY>)-List shown right applies from July 2010 onwards. For earlier models, there are only 4 changeable items. Refer to the list shown right for these settings.<\/p>\n

\"\"<\/a><\/p>\n

R51 Pathfinder \/ D40 Navara(Spain \/ Thai)-The list shown right applies to all R51 & Spain build D40-For all Thailand build D40, there is only 1 changeable item; \u201cKEYLESS ENTRY\u201d-For all D40 RX 2005 ~ 2010MY, KEYLESS ENTRY = WITHOUT<\/p>\n

\"\"<\/a>
\nZ51 Murano(All variants 2009MY >)-2009MY ST Muranois notfitted with \u201cI-KEY\u201d-2010MY> ST Muranois fitted with \u201cI-KEY\u201d(Look for small button on the exterior door handles -both front doors to confirm)<\/p>\n

\"\"<\/a><\/p>\n

J31 Maxima (All variants 2009MY>)-250 ST-L variant is notfitted with \u201cI-KEY\u201d-250 ST-L \/ 350 ST-S variants are notfitted with \u201cAV C\/U\u201d (colour screen \/ Sat Nav)<\/p>\n

\"\"<\/a><\/p>\n

Z34 370Z (All variants 2009MY >)<\/p>\n

\"\"<\/a><\/p>\n

CONFIGURATIONK13 Micra (All variants 2010 MY >)<\/p>\n

-Take careful notice of vehicles fitted with I-KEY.<\/p>\n

\"\"<\/a><\/p>\n

N17 Almera(All variants 2012 MY >)<\/p>\n

-Take careful notice of vehicles fitted with I-KEY.<\/p>\n

\"\"<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

This article focus on how to use\u00a0Nissan Consult 3 Plus to configure Nissan BCM.Hope it helps,and if you want to know more about Nissan Consult 3 Plus,check:Nissan Consult 3 Plus Projects. Related Contents: Nissan Consult 3 Plus Software Download How… Continue Reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":3259,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[8,1],"tags":[741,1055,1054,108,1052,1053,828],"_links":{"self":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/3258"}],"collection":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/comments?post=3258"}],"version-history":[{"count":2,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/3258\/revisions"}],"predecessor-version":[{"id":3279,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/3258\/revisions\/3279"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/media\/3259"}],"wp:attachment":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/media?parent=3258"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/categories?post=3258"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/tags?post=3258"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}