The coding procedure can be applied to All Porsche Models.<\/p>\n
Diagnostic system required: Porsche PIWIS II<\/a>, PIWIS Tester III<\/a><\/p>\n PSE retrofit coding is done as follows:<\/p>\n The sports exhaust system button can only be coded on the right-hand side of the switch console. REPLACING SWITCH CONSOLE (ALL MODELS) > ENABLING SPORT\/SPORT PLUS\/SPORT CHRONO PLUS FUNCTION Maintenance of vehicle data<\/strong><\/p>\n Select Additional menu by pressing F7 .\u200b Press F11 to return to the list of control units.\u200b The coding procedure can be applied to All Porsche Models. Diagnostic system required: Porsche PIWIS II, PIWIS Tester III PSE retrofit coding is done as follows: The sports exhaust system button can only be coded on the right-hand side of… Continue Reading
\nCode keypad assignment.<\/p>\n
\nInformation
\nOn vehicles with the equipment variant SPORT\/SPORT Plus\/Sport Chrono Plus, a function enable process must be carried out after replacing the switch console.
\n1. Determine function enabling code in PIWIS.
\n2. Connect the Porsche PIWIS Tester to the vehicle and start the System Tester. Switch on ignition.
\n3. Select the vehicle type and start the PIDT.
\n4. Select Air conditioning control unit using the cursor keys and press [F12].
\n5. Select Drive links\/checks .
\n6. Select Function enable using the cursor keys and press [F12].
\n7. Enter the function enabling code and save it by pressing [F8].\u200b
\nREPLACING SWITCH CONSOLE (ALL MODELS) > ENABLING SPORT\/SPORT PLUS\/SPORT CHRONO PLUS FUNCTION > CODING KEYPAD
\nASSIGNMENT
\n1.Connect the Porsche diagnostic tool<\/a> Porsche PIWIS 3 to the vehicle and start the System Tester. Switch on ignition.
\n2. Select the vehicle type and start the PIDT.
\n3. Select Air conditioning control unit using the cursor keys and press [F12].
\n4. Select Codings\/adaptations .
\n5. Select Customer-specific settings using the cursor keys and press [F12].
\n6. Select Keypad assignment and press [F12].
\n7. Check the button assignment using the switch console.\u200b
\n7.1. Select function of the switches from the shortcut menu if necessary.\u200b
\n8. Press [F8] to save the button assignment.
\n9. The message Data has been written appears on the Tester screen. Press [F12] to exit.
\n10. Read out the fault memory and erase it if necessary.
\n11. Check the function of the switch console during a test drive.\u200b<\/p>\n
\nSelect the Maintenance of vehicle data function. Press F12 until M numbers\u200b appears in the Value group column.\u200b
\nSelect 176 \u2013 Sports exhaust system in the Coding value column. When you\u200b touch the Installed cell, a tick appears.\u200b
\nSave the values by pressing F8 . Wait until the message Modified values have\u200b been buffered appears.\u200b
\nPress F12 until F8 can be activated.\u200b
\nPress F8 to write values. Wait until the message Generation of vehicle data is\u200b complete appears.\u200b
\nPress F12 to switch to Log management. Open the log by pressing F10 and\u200b check that vehicle equipment 176 Sports exhaust system is displayed.\u200b
\nAdapt coding<\/p>\n
\nSelect all control units.\u200b
\nSwitch to the Codings\/adaptations menu.\u200b
\nSelect Automatic coding. Press F12 to continue. Wait until the message Coding has been completed successfully appears. Press F12 to continue.\u200b
\nOnce coding is complete, read out the fault memories of all systems, work through any existing faults and erase the fault memories.<\/p>\n","protected":false},"excerpt":{"rendered":"