{"id":4517,"date":"2020-06-05T08:08:57","date_gmt":"2020-06-05T08:08:57","guid":{"rendered":"https:\/\/www.cnautotool.com\/blog\/?p=4517"},"modified":"2020-06-05T08:08:59","modified_gmt":"2020-06-05T08:08:59","slug":"how-to-setup-launch-x431-v-8-inch-tablet-wifi-bluetooth","status":"publish","type":"post","link":"https:\/\/www.cnautotool.com\/blog\/how-to-setup-launch-x431-v-8-inch-tablet-wifi-bluetooth\/","title":{"rendered":"How to Setup Launch X431 V 8 inch tablet WiFi & Bluetooth"},"content":{"rendered":"

Launch X431 V 8 inch<\/a> Tablet How to setup WiFi & Bluetooth for vehicle diagnosis? Here this blog is the WiFi & Bluetooth setup manual for reference.<\/p>\n

Part 1: How to set up Wi-Fi in the Launch X431 V 8inch scan tool<\/strong><\/p>\n

Attention: If you don\u2019t need to use Wi-Fi for a while, you can turn it off to conserve battery life.<\/p>\n

X-431 V has built-in Wi-Fi that can be used to get online. Once you\u2019re online, you can register your X-431 V, browse the Internet, get apps, send email and check for software updates.<\/p>\n

I. Connect to a Wi-Fi network<\/strong>
\n1. On the home screen, tap Settings > WLAN.
\n2. Slide the Wi-Fi switch to ON, X-431 V will start searching for available wireless networks.
\n3. Select a wireless network,
\n\u2013 If the chosen network is open, X-431 V will connect automatically;
\n\u2013 If the selected network is encrypted, a network password will need to be entered.
\n4. When \u201cConnected\u201d appears, tap the Enter button to exit and return to the home screen.<\/p>\n

Note: When Wi-Fi is not required, this should be disabled to conserve battery Power.
\nOnce it is connected successfully, tap the Wi-Fi network from the list to view its name, link speed, security type, IP address etc.<\/p>\n

When this tool is in range, it will connect to the previously linked network Automatically.<\/p>\n

II. Disconnect from a Wi-Fi network
\n1. On home screen, tap Settings > WLAN.
\n2. Tap the network with a Connected status, then tap \u201cDisconnect\u201d<\/p>\n

III. Vehicle diagnosis via WiFi<\/p>\n

\"\"<\/a><\/p>\n

Part 2: How to perform Bluetooth setting in the new LaunchX431 V scan tool<\/strong><\/p>\n

I. Bluetooth setting
\nEnter X-431 V Bluetooth setting screen (\u201cSettings\u201d \u2013> \u201cBluetooth\u201d), slide the Bluetooth switch to ON and X-431 V will start searching available Bluetooth device, tap the desired connector to pair.<\/p>\n

By default, the Bluetooth name is 98549*****00 (where ***** stands for 5 digits.).
\nNote: In case no Bluetooth setting is done before diagnostic software is launched, you can also configure it while using the software.<\/p>\n

II. Car diagnosis via Bluetooth
\nTap \u2013> \u201cDiagnostic\u201d to enter the vehicle selection page.
\nTake Demo as an example to demonstrate how to diagnose a vehicle.
\n1). Tap the \u201cDEMO\u201d, the following dialog box appears:<\/p>\n

\"\"<\/a><\/p>\n

2). Tap \u201cDEMO\u201d to ignore Bluetooth connection and jump to the DEMO system selection screen. (Note: No Bluetooth connection is required for DEMO program.)<\/p>\n

\"\"<\/a><\/p>\n

3). Tap \u201cEngine\u201d, the system will jump to the function menu.<\/p>\n

\"\"<\/a><\/p>\n

Read DTC<\/p>\n

\"\"<\/a><\/p>\n

Read Data Stream<\/p>\n

\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

Also, special functions and reset service are available.
\nSpecial functions:<\/strong>
\nInjector test, fuel pump test, purge control solenoid and so on.
\nReset service:<\/strong>
\nOil Reset Service, Steering Angle Calibration, Electronic Parking Brake Reset, Battery Register \/ Battery Maintenance, ABS Bleeding, Electronic Throttle Position Reset \/ Learn, Diesel Particulate Filter (DPF) Regeneration, Tire Pressure Monitor System Reset<\/p>\n","protected":false},"excerpt":{"rendered":"

Launch X431 V 8 inch Tablet How to setup WiFi & Bluetooth for vehicle diagnosis? Here this blog is the WiFi & Bluetooth setup manual for reference. Part 1: How to set up Wi-Fi in the Launch X431 V 8inch… Continue Reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":4518,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[5,240],"tags":[40,28,1316,1161,1317,1321,1318,1320,42,41,83,39,1319],"_links":{"self":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/4517"}],"collection":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/comments?post=4517"}],"version-history":[{"count":2,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/4517\/revisions"}],"predecessor-version":[{"id":4526,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/4517\/revisions\/4526"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/media\/4518"}],"wp:attachment":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/media?parent=4517"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/categories?post=4517"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/tags?post=4517"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}