{"id":6206,"date":"2020-10-19T04:16:01","date_gmt":"2020-10-19T04:16:01","guid":{"rendered":"https:\/\/www.cnautotool.com\/blog\/?p=6206"},"modified":"2020-10-21T04:20:50","modified_gmt":"2020-10-21T04:20:50","slug":"svci-2020-abrite-commander-new-added-functions","status":"publish","type":"post","link":"https:\/\/www.cnautotool.com\/blog\/svci-2020-abrite-commander-new-added-functions\/","title":{"rendered":"SVCI 2020 ABRITE Commander New Added Functions"},"content":{"rendered":"

Tools bought SVCI 2020<\/a>, there is updated information:<\/p>\n

New in V7.4:<\/strong>
\n\u2013 Automatical recognition of swapped files in dump tool. In the most cases the no need to flip bytes manually
\n\u2013 Added support for unsupported till now subtype of Simos7.1 engine control units \u2013 Login (PIN) and component security are now available<\/p>\n

New in V7.5:<\/strong>
\n\u2013 Keylearning reworked. Vehicle\/Immobilizer type is autodetected. Added information for existing keys, key recognition, engine start status<\/p>\n

New in V7.6:<\/strong>
\n\u2013 Added function for Door unlocking<\/p>\n

New in V7.7:<\/strong>
\n\u2013 Added support for VDO instruments cluster 2006+ \u2013 odometer changing, reading PIN codes, read\/write immobilizer data. Initially only first VDO versions are supported.
\n\u2013 Key-learning \u2013 adding key for 15 seconds (old keys continue to work) for VDO CAN instruments<\/p>\n

New in V7.8:<\/strong>
\n\u2013 Added support for almost all VDO instrument SW versions present on VW\/Seat\/Skoda after 2007+
\n\u2013 Added functionality to read the EEPROM\/RAM\/FLASH for the VDO instruments after 2007+<\/p>\n

New in V7.9:<\/strong>
\n\u2013 When reading ME7 the MAC is also displayed. Possible to change MAC for ME7 in dumptool too.
\n\u2013 Preapre dealer keys for Q7\/A6\/Allroad directly from the EZS-Kessy dump
\n\u2013 Learn keys for Q7\/A6\/Allroad directly in the EZS-Kessy dump<\/p>\n

New in V8.0:<\/strong>
\n\u2013 Micronas CDC32xx programmer support added
\n\u2013 New version of the VDO instrument (Jetta 2009) added
\n\u2013 Some versions A3\/A8 2003-2006 added<\/p>\n

New in V8.1:<\/strong>
\n\u2013 MED9x bypass by ECU dump
\n\u2013 VW Crafter key-learning added<\/p>\n

New in V8.2:<\/strong>
\n\u2013 Added some new VDO versions
\n\u2013 Added EDC16 make virgin function in dump tool<\/p>\n

New in V8.3<\/strong>
\n\u2013 Chinese language added
\n\u2013 Added decoding (PIN + Component security) of some Simos Engine control units (Simos 9.2, Simos 6.3)<\/p>\n

New in V8.4<\/strong>
\n\u2013 Added A3\/S3 support for the instruments after 2006<\/p>\n

New in V8.5<\/strong>
\n\u2013 Added Q7\/A6\/Allroad with EDC17\/MED17 over OBDII
\n\u2013 Several SW version A3\/S3 after 2006 added<\/p>\n

New in V8.6<\/strong>
\n\u2013 ME7.5.20 by CAN read EEPROM\/CS\/LOGIN added
\n\u2013 Added SW versions A3\/S3 after 2006<\/p>\n

New in v8.7<\/strong>
\n\u2013 Added SW versions A3\/S3 after 2006
\n\u2013 Added SW versions A8 after 2003-2006
\n\u2013 A6 2003-2008 odometer can be changed immediately (not needed to drive the car), and not needed to enter manually the existing mileage.<\/p>\n

New in v10.0<\/strong>
\n\u2013 Mileage reset by OBDII in DSC
\n\u2013 Immobilizer system bypass for engine control units Simos PPD1.x
\n\u2013 Measured Values under UDS available
\n\u2013 Change mileage in VDO dashboards with NEC microcontroller and UDS diagnostic protocol by OBDII.
\n\u2013 Read\/write immobilizer data for VDO dashboards with NEC microcontroller and UDS diagnostic protocol by OBDII.
\n\u2013 Make keys for VDO dashboards with NEC microcontroller and UDS diagnostic protocol by OBDII.
\n\u2013 User interface changed
\n\u2013 German language added
\n\u2013 Producing TP22\/TP23\/TP24\/TP25 transponders
\n\u2013 No more needed to use precoded transponder TA2\/TA3\/TA4\/TA5<\/p>\n

New in V11.0<\/strong>
\n\u2013 Passat B6\/CC with Keyless added (Hitag2 transponder)
\n\u2013 Golf V Visteon dashboard \u2013 possible to read PIN and make dealer keys by OBDII
\n\u2013 Magneti Marelli Engine controll unit (equipped in Golf V) \u2013 Possible to make dealer keys from EEPROM dump.
\n\u2013 Devices with DTCs shown in red
\n\u2013 Possibility to sort device according VAS ID, Name, DTC count, etc.
\n\u2013 Possibility to select devices contained on comfort, infotainment, etc. buses.
\n\u2013 Improved basic settings for the diagnostic
\n\u2013 Improved measured values for the diagnostic<\/p>\n

New in V11.1<\/strong>
\n\u2013 Reading PIN\/CS of ME7.5.30 added
\n\u2013 Added SW versions Audi A3\/S3\/TT<\/p>\n

New in V12.0<\/strong>
\n\u2013 VDO dashboards with 24C64
\n\u2013 Extended support for Visteon dashboards
\n\u2013 Extended support for A3 dashboards
\n\u2013 Mileage correction Lamborighini Callardo added
\n\u2013 Key-learning Lamborighini Callardo added
\n\u2013 live data (measured values) visualization
\n\u2013 ESL adaptation for VW Touareg\/Phaeton\/Bentley Continental\/Porsche Cayenne<\/p>\n

New in V13.0<\/strong>
\n\u2013 Magneti Marelli UDS dashboards with 9S12 \u2013 mileage correction possible. No need of existing key!
\n\u2013 Magneti Marelli UDS dashboards with 9S12 \u2013 learning keys possible. No need of existing key!
\n\u2013 VDO dashboard with 24C64 \u2013 possible to enter service mode when no keys are available
\n\u2013 Extended support for A3 dashboards
\n\u2013 Spanish language added<\/p>\n

New in V13.1<\/strong>
\n\u2013 Preparing keys from Micronas CDC32xx Flash\/EEPROM dump
\n\u2013 Extended support for Audi TT 2007+ (two software versions are added)
\n\u2013 Magneti Marelli UDS improved EEPROM decoding, now more dashboards are covered<\/p>\n

New in V14.0<\/strong>
\n\u2013 Odometer value extract from Micronas CDC32xx Flash\/EEPROM dumps and export to EEPROM dump
\n\u2013 Mileage correction for Audi A3\/TT\/Q7 2010
\n\u2013 Mileage correction for Audi A6 2008+
\n\u2013 Mileage correction for Audi A8 2006+
\n\u2013 Key learning VW\/Seat\/Skoda\/Audi (k-line diagnosis KW1281) \u2013 possible to read PIN and make dealer keys by OBDII
\n\u2013 Mileage correction for Audi A3 -2009 \u2013 some more versions added to the supported list.
\n\u2013 A6\/Q7\/Allroad with reflashed in VAG workshop EZS-Kessy software \u2013 possibility to make keys by OBDII if existing key is present
\n\u2013 A6\/Q7\/Allroad support for EZS-Kessy 2011 \u2013 possibility to make keys by OBDII if existing key is present
\n\u2013 Audi A3\/A8 2006-2009 \u2013 read\/write EEPROM, read RAM\/flash
\n\u2013 Buttons \u201cBackup\u201d and \u201cRestore\u201d in \u201cVDO NEC 2009+\u201d for backup and restore of ABS module coding.
\n\u2013 New special function \u201cCoding calculator\u201d.
\n\u2013 extended support for mileage recalibration for dashboards for Audi A4\/A5\/Q5 after 2010 (new software versions added)
\n\u2013 French language added<\/p>\n

New in V15.0<\/strong>
\n1. Adapt spare parts and remove component protection for Audi A6\/Q7\/Allroad\/A4\/A5\/Q5:
\n\u2013 for A6\/Q7\/Allroad 2003-2008 possible to adjust the component protection for airbag, dashboard, EZS-Kessy and comfort module completely by OBDII.<\/p>\n

\u2013 for all other modules (i.e. except these which can be made by OBDII \u2013 airbag, dashboard, EZS-Kessy and comfort module) in A6\/Q7\/Allroad 2003-2012 and A4\/A5\/Q5 2007+
\nis possible to adjust the component protection if you have two Gateway EEPROM dumps: dump from the car where you will build the module, and dump from the car from which the module is taked.<\/p>\n

\u2013 for A6\/Q7\/Allraod 2008+ possible to adjust the component protection for dashboard using EEPROM dump of the Gateway unit
\n(i.e. not needed to have Gateway EEPROM dump from the car from which you take the dashboard)<\/p>\n

\u2013 for A4\/A5\/Q5 2007+ possible to adjust the component protection for dashboard using EEPROM dump of the Gateway unit
\n(i.e. not needed to have Gateway EEPROM dump from the car from which you take the dashboard)<\/p>\n

2. Read\/Write EEPROM for all Siemens CAN Airbags 2003-2008 like 4F0959655B (Audi A6\/Q7\/Allroad 2003-2008), 1K0909605AB, 1K0909605C, 1K0909605AD, etc\u2026
\n3. Service interval reset for vehicles with UDS diagnostics
\n4. Mileage correction for Audi A8 2006+ \u2013 Added SW Vers. C3.21
\n5. RB8 remove DEF error.
\n6. Key learning external immobox Megamos
\n7. Remote control learning updated. List of supported vehicles:
\n\u2013 Audi A3\/S3 1997+
\n\u2013 Audi A4\/S4\/RS4 1995-2008
\n\u2013 Audi A6 1997 \u2013 2006
\n\u2013 Audi TT 1999+
\n\u2013 Seat Exeo 2009+
\n\u2013 Seat Leon 2006+
\n\u2013 Seat Altea 2004+,
\n\u2013 Seat Toledo 2005+
\n\u2013 Skoda Octavia I 1997+
\n\u2013 Skoda Octavia II 2005+
\n\u2013 VW Caddy 2004+
\n\u2013 VW Eos 2006+
\n\u2013 VW Jetta 1998+
\n\u2013 VW Golf\/Bora IV 1998+
\n\u2013 VW Golf\/Golf Plus\/Bora V 2004+
\n\u2013 VW Golf\/Golf Plus\/Golf Variant 2009+
\n\u2013 VW Touran 2003+
\n\u2013 Skoda Fabia 2007+
\n\u2013 VW New Beetle\/Cabriolet 1998 \u2013 2010
\n\u2013 VW Fox\/Spacefox\/Sportvan\/Suran 2005+
\n\u2013 VW Passat 1997 \u2013 2011
\n\u2013 VW Transporter 1997 \u2013 2009
\n\u2013 VW Tiguan 2007+<\/p>\n

New in V16.0<\/strong>
\n1. Component protection for dashboard from Audi A6\/Q7\/Allroad 2008+ added
\n2. New special function AN037 implemented \u2013 \u201cECU adaptation by OBDII\u201d.
\nThe special function is available for all engine control units which are
\nnot supporting channel 50 adaptation. This includes EDC16, EDC17, MED9, MED17, Simos benzin, Simos PPD (diesel),
\neven some ME7 (e.g. 7.5.30) are adapted in that way.
\nFor virgin ECUs it is not necessary to have anything, for used (second-hand) ECUs for the adaptation is needed
\nto have the old CS and PIN of the engine control unit.
\nThe old CS in this case can be retried in two way:
\n\u2013 for EDC16, MED9, Simos PPD, ME7 is retrieved by OBDII
\n\u2013 for all other cases (e.g. EDC17, MED17) it can be retrieved from the immobilizer of the car where the ECU was originally build<\/p>\n

The adaptation of the ECU makes possible following:
\n\u2013 view power class of the ECU. Power class is fixed in ECU flash and only engine control units with same power class can be replaced.
\nIf power class is not equal of both ECUs, it is possible to change power class in immobilizer.
\n\u2013 change component security (CS)
\n\u2013 change PIN
\n\u2013 change MAC (MAC is automatically synchronized after the adaptation is made)
\n\u2013 change Immo number
\n\u2013 change vehicle identification number
\n3. ECU Simos 7.1 \u2013 Read PIN\/CS\/MAC added.
\n4. Key Learning Special Function \u2013 \u201cStandard Mode\u201d (as till V15.0) and \u201cWizard Mode\u201d (from V16.0) separated.<\/p>\n

New in V16.1<\/strong>
\n1. AN038 implemented \u2013 BCM2 A4\/A5\/Q5 2007+ key-learning
\nThe special function makes possible to learn keys for A4\/A5\/Q5 2007+ vehicles with the BCM2 immobilizer.
\nTo make a key you need to read the BCM2 dump. This is possible with the ABPROG (ZN030) programmer. The ABPROG programmer
\nis integrated into the ABRITES Commander for VAG, wiring diagram is also available in
\nthe ABRITES Commander for VAG folder.
\nAfter the BCM2 dump is read, you can make a dealer keys for this car. The used transponder should be Hitag2-Extended.
\nThe user has also the possibility to learn from 1 to 8 keys.<\/p>\n

Summary:
\n\u2013 read BCM2 dump with ABPROG (ZN030)
\n\u2013 prepare dealer key with Hitag2-extended (PCF7937 based) key.
\n\u2013 learn 1 to 8 keys to the vehicle.<\/p>\n

2. AN039 implemented \u2013 BCM2 A4\/A5\/Q5 2007+ key-learning by OBDII
\nReads the BCM2 module by OBDII, both for 8K0907298C and xxx907064xx modules.<\/p>\n

3. EZS-Kessy Write EEPROM \u2013 now possible to write also the area $100-$15F (containing the immobilizer data)<\/p>\n

4. A8(4H)\/A7(4G)\/A6(4G)\/Touareg(7P) UDS dashboard with S95320 \u2013 read\/write EEPROM, modify EEPROM dump for mileage recalibration (requires ABPROG), mileage read\/recalibration.<\/p>\n

5. Standard diagnocs functions Adaptation, Measured values, Actuator test \u2013 supported under UDS.<\/p>\n

6. \u201cGuided functions\u201d special function added
\n\u2013 compilation from existing:
\n\u2013 \u201cService Interval Reset\u201d, \u201cNavigation\u201d
\n\u2013 \u201cBrake pads change\u201d
\n\u2013 \u201cCruise Control activation\/deactivation\u201d
\nand newly added :
\n\u2013 \u201cChange display units\u201d
\n\u2013 \u201cChange display language\u201d
\n\u2013 \u201cSeatbelt warning activation\/deactivation\u201d
\n\u2013 \u201cBluetooth activation\/deactivation\u201d
\n\u2013 \u201cPower Windows Open\/Close via Remote Control\/Door Lock\/Window Switch activation\/deactivation\u201d<\/p>\n

functions.<\/p>\n

7. Dumptool function added:
\n\u2013 ECU Magneti Marelli \u2013 Reset component protection data [95320].
\n\u2013 Passat B6 \u2013 Login code extraction by comfort module dump<\/p>\n

8. Instrument cluster CAN: new SW versions added for Instrument Cluster Micronas 2007+.
\n9. Instrument cluster KLine: new SW versions added for Instrument Cluster ( VDO66,VDO86,Motometer ).<\/p>\n

New in V17.0<\/strong>
\n1. Component protection generation 1:
\n\u2013 Audi A8 2003-2010 (Instrument cluster, seat memory driver, seat memory passenger),
\n\u2013 Audi A6 2004-2008 (MMI, ILM Beifahrer, Central electric, MP3 CD-Changer)
\nFor the A8 seat memory (driver and passenger) also the vehicle identification number is synchronized authomatically.
\n2. EZS-Kessy adaptation for Audi A8 (2003-2008) and VW Touareg (2007-2008)
\n3. VDO instrument SW version VK354608LL \u2013 V09.00.00 added \u2013 no need of working key!
\n4. VDO instrument SW version V354608ML \u2013 V08.00.00 added \u2013 no need of working key!
\n5. VDO instrument SW version VK354607LL \u2013 V09.00.00 added \u2013 no need of working key!
\n6. VDO instrument SW version VK354608LL \u2013 V08.00.00 added \u2013 no need of working key!
\n7. Johnson Controls Instrument Cluster \u2013 mileage recalibration , EEPROM Read\/Write.
\n8. Common user interfaces for all CAN instrument clusters. Now the instrument cluster type is autodected
\nand all CAN dashboards are read\/write in one common place (mileage, immobilizer data, keys)
\n9. VW Touareg and Audi A6\/A7\/A8 2010+ added to AN038 and AN039 if there is a working key (or a dealer key)
\n10. Johnson Controls Instrument Cluster \u2013 key-learning completely by OBDII, no need of working key.<\/p>\n

New in V17.1<\/strong>
\n1. VDO with TFT displays added for mileage
\n2. VDO with TFT displays added for key-learning
\n3. Component protection for Audi A6\/Q7 for Auhilary heater added<\/p>\n

New in V18.0<\/strong>
\n1. !!!HIT!!! \u2013 New Special function implemented \u2013 AN041:
\n\u2013 EDC17\/MED17 PIN\/CS\/MAC read by OBDII!!!
\n\u2013 both TP2.0 and UDS engines are supported!
\n\u2013 Supported are ImmoIII, ImmoIV and ImmoV systems, but ImmoV systems don\u2019t have MAC\/PIN, only CS inside
\n\u2013 Online connection required!
\n\u2013 Free for all owners of AN014<\/p>\n

2. !!!HIT!!! \u2013 Added special button for \u201cALL KEYS LOST\u201d situation
\n\u2013 Works for all VW\/Seat\/Skoda\/Audi vehicles with Immo IV systems (UDS immobilizers except these with BCM2 \u2013 BCM2 is Immo V system)
\n\u2013 Works also for A6 with the facelift (2008-2010) and Q7 till 2012!!!
\n\u2013 Works for the Passat B6\/CC\/7 till 2013
\n\u2013 Works for the Audi A3 till 2013
\n\u2013 Works also for many of the VW\/Seat\/Skoda\/Audi Immo III systems (TP2.0 immobilizers)
\n\u2013 Add keys completeley by OBDII wihtout having any key from the car in less than 2 minutes!!!
\n\u2013 ATTENTION: Any original keys cannot be used anymore<\/p>\n

3. !!!HIT!!! \u2013 EDC17 UDS \u2013 Now possible to adapt EDC17 with UDS diagnostic protocol using AN037
\n4. !!!HIT!!! \u2013 Passat B6\/CC \u2013 install new Comfort module using AN037. Possibility to search 7 bytes automatically using AN037!!!
\n5. !!!HIT!!! \u2013 Audi A6\/Allroad\/Q7 Transmission gearbos re-adaptation (change from one car to another of second-hand gearboxes)
\n6. Possible to learn keys for the Immo IV systems (UDS immobilizers), Audi A6\/Q7 also from the main key-learning menu<\/p>\n

7. New Special function implemented \u2013 AN042:
\n\u2013 Read\/Write EDC17\/MED17 Flash\/EEPROM
\n\u2013 Display PIN\/CS\/MAC from EDC17\/MED17 dump<\/p>\n

8. Component protection \u2013 added support for Audi A6\/Q7 Seat memory module
\n9. Component protection \u2013 added support for Audi A6\/Q7 Climate control 4F0910043A
\n10. Component protection \u2013 added support for Audi A8 DSP Bang & Olufsen<\/p>\n

New in V19.0<\/strong>
\n1. Ability to flash SGO files from the VAS5054 database
\n2. Make keys for Passat B6\/CC with keyless-go. No searching the 7th byte is needed.
\n\u201cALL KEYS LOST\u201d works now also for Passat B6\/CC with keyless-go.
\n3. Unsuppoprted VDO NEC dashboards added \u2013 both for mileage and keys
\n4. Component protection for Audi A8 climate control added
\n5. Component protection for Audi A8 ILM Beifahrer added
\n6. Component protection for Audi A8 Comfort module added
\n7. Audi A8 2003-2010 Transmission gearbos re-adaptation (change from one car to another of second-hand gearboxes)
\n8. EZS-Kessy re-adaptation only of PIN\/CS (change from one car to another of second-hand modules)
\n9. Bentley Mulsanne key-learning now possible<\/p>\n

New in V20.0<\/strong>
\n1. Ability to flash FRF files from the VAS5054 database
\n2. MM with NEC+95320 \u2013 keylearning possibilities added
\n3. Audi A4\/A5\/Q5 2008+ \u2013 component protection removal for MMI 2G added
\n4. Audi A4\/A5\/Q5 2008+ \u2013 component protection removal for MP3 CD Changer 2G added
\n5. Audi A4\/A5\/Q5 2008+ \u2013 change mileage in key
\n6. Audi A4\/A5\/Q5 2008+ \u2013 added reading of the gateway A4\/A5\/Q5 for component protection
\n7. Audi A6\/Q7\/Allroad 2003-2010 \u2013 component protection removal for DSP (Basic)
\n8. Audi A6\/Q7\/Allroad 2003-2010 \u2013 component protection removal for DSP (Bose)
\n9. VW Polo EDC17 U05 added PIN\/CS decryption from flash dump (using AN042)<\/p>\n

New in V21.0<\/strong>
\n1. EDC17\/MED17 immobilizer bypass by EEPROM dump
\n2. Added adaptation of Immo V engine control unit and BCM2 modules.
\n3. Change mileage in EDC17\/MED17 (if mileage is available in the engine control unit)
\n4. Transfer PIN\/CS\/MAC from one EDC17\/MED17 to another using flash\/EEPROM dumps
\n5. Fix the checksums in EDC17\/MED17 flash
\n6. Support for Seat Exeo with RB8 dashboard added \u2013 both for mileage and keys
\n7. Added support for Audi A6 2.4L MPI 2004-2008
\n8. MMI3G component protection added for A4\/A5\/Q5<\/p>\n

New in V22.0<\/strong>
\n1. EDC17\/MED17 immobilizer bypass by Flash dump
\n2. EDC17\/MED17 read\/write flash\/EEPROM also when locked with TPROT V08
\n3. Passat B6\/CC\/B7 decoding of the PIN\/CS from comfort module dump without using CS from ECU (for some comfort module versions only)
\n4. Airbag A4\/A5\/Q5 2008+, A6\/Q7 2008+, A7\/A8\/VW Toaureg 2010+ read\/write eeprom by OBDII
\n5. component protection removal by OBDII for 15-Airbag for most of the A4\/A5\/Q5 2008+, A6\/Q7 2008+, A7\/A8\/VW Toaureg 2010+
\n6. Component protection removal by OBDII for 5F-Information Electric (MMI3G)
\n7. Component protection removal by OBDII for 17-Instrument cluster for A6\/A7\/A8\/Touareg 2010+
\n8. Added reading by OBDII for the most of the new generation Gateways 8R0 and 8U0. Used for Component protection
\n9. Added new versions of VDO NEC dashboards (e.g. for Q3) ?both mileage and keylearning
\n10. Added new versions of JCI dashboards for keylearning
\n11. A6\/A7\/A8\/Touareg 2010+ \u2013 mileage recalibration. Requires that the EEPROM dump is read\/modified with a programmer.<\/p>\n

New in V23.0<\/strong>
\n1. Component protection generation 1 for Audi A8 DSP Bose 2003-2010
\n2. Component protection generation 2 for Siemens Airbags (UDS) (need to modify EEPROM dump)
\n3. Component protection generation 2 \u2013 improved functionalitiy and added SW versions for Climate Control for A6\/Q7\/Allroad (C6) 2005-2010
\n4. A6\/Q7\/Allroad (C6) 2005-2010 simplified transmission adaptation procedure with just one click.
\n5. EDC17 Boot-Mode \u2013 added possibility to change the PIN\/CS\/MAC\/ImmoNumber\/Vin directly in the dump
\n6. Replace of defective BCM2 improvement. Now all BCM2 are covered and no more problem with component protection int MMI2G and MP3 CD-Changer after exchange.
\n7. TC1767 and TC1797 write flash by boot-mode added
\n8. Added new versions of VDO NEC dashboards ?both mileage and keylearning
\n9. Component protection generation 1 for Audi A8 Bosch Airbag 2003-2010
\n10. DPF OFF for EDC16\/EDC17<\/p>\n

New in V24.0<\/strong>
\n1. Generally reworked standard diagnostic, including
\n\u2013 extremly fast \u201csmart mode\u201d for scan of the car modules, and for read\/clear DTCs
\n\u2013 Improved device identification
\n\u2013 Possibility to observe more than 1 channel of the measured values
\n\u2013 Possibility to observe the measured values while actuators are active
\n\u2013 Possibility to resize the main diagnostic windows in order to be able to view more information
\n\u2013 Improved measured values, actuators, basic settings (now all they are in \u201cLive data\u201d section)
\n\u2013 Improved oscilloscope control with possibility to save data to file.
\n2. New special function AN055 \u2013 EDC17\/MED17 reading PIN\/CS without opening the ECU even if unsupported till now ECUs (2012+)
\n3. New special function AN056 \u2013 Install theft protection for A6\/Q7 2005-2014, A4\/A5\/Q5\/ 2007+, A6\/A7\/A8\/Touareg 2010+, VW\/Seat\/Skoda with VDO UDS dashboards (NEC+24C32\/24C64)
\n4. Added mileage support for Magneti Marelli UDS dashboards with NEC+95320 EEPROM
\n5. Component protection generation 2 for Q7 2005+ Distronic module.
\n6. Component protection generation 1 for Q7 DSP Bang & Olufsen
\n7. Mileage\/Key-learning support added for some dashboards VDO UDS (2013+)
\n8. Improved exchange procedure for EZS-Kessy A6 2005-2009 \/Q7 2005-2014.<\/p>\n

New in V25.0<\/strong>
\n1. Added functionality for reading of the Simos PCR 2.1 engine control units. The PIN\/CS\/MAC are read for these engine control units (ECUs).
\nIt is necessary first to unlock the ECU from the EEPROM (read EEPROM with a programmer, then software generates UNLOCK dump, which have to be written with a programmer)
\nOnce the ECU is unlocked it is possible to read the PIN\/CS\/MAC of the ECU by OBDII. This data can be used for replacement of defective engine control unit,
\nor for making keys for a car where all keys are lost.
\n2. TCU adaptation for A4\/A5\/Q5 2008+, A6\/A7\/A8\/Touareg 2010+. This will synchronize the transmission control unit (TCU) with the immobilizer, and will allow to shift the gears.
\nFirst it is necessary to read the new (replacement) TCU on the table by direct connection to the TCU connector. Once the TCU is read,
\nit can be adapted to the car completely by OBDII.<\/p>\n

New in V25.1<\/strong>
\n1. Added new software versions of the vehicles with BCM2 for key programming by OBDII<\/p>\n

New in V26.0<\/strong>
\n1. Audi A6\/A7\/A8 key-learning with ALL KEYs LOST!!! Requires connection to the internal communication bus and online connection.
\n2. Audi A4\/A5\/Q5\/A6\/A7\/A8 electronic steering lock adaptation. Requires dump of the BCM2 from the car from where you take
\nthe ELV (and for A6\/A7\/A8 also a working key from the car from where you take the ELV).<\/p>\n

New in V26.1<\/strong>
\n1. Added support for Megamos 48 keyless-go keys
\n2. Added some versions of A4\/A5 dashboards for component protection<\/p>\n

New in V27.0<\/strong>
\n1. Extended diagnostic for all UDS modules \u2013 live data and adaptations
\n2. Immo V engine control unit adaptation \u2013 added support for A6\/A7\/A8\/Touareg engine control units.<\/p>\n

New in V27.1<\/strong>
\n1. Extended diagnostic for all UDS modules \u2013 actuators and basic setting added
\n2. Added support for some VDO NEC dashboards (e.g. Q3 2012+)<\/p>\n

New in V27.2<\/strong>
\n1. Improved CAN UDS diagnostic speed
\n2. Additional support for VDO NEC Clusters after 2010
\n3. Minor bug-fixes<\/p>\n

New in V27.3<\/strong>
\n1. A6\/A7\/A8 all keys lost \u2013 added possibility to make key from ELV dump. Touareg 2010+ now also possible (using ELV dump)
\n2. Added support for some VDO NEC dashboards (A1\/Q3 2012+, Touaran 2015)
\n3. Added some versions of A6\/Q7 climatronic for component protection<\/p>\n

New in V27.4<\/strong>
\n1. Added support for ProTag transponder programmer<\/p>\n

New in V27.5<\/strong>
\n1. VW Polo Russia (24C32 EEPROM) is now supported
\n2. Added support for component protection for DSP Bang & Ofulsen A4\/A5\/Q5 2008+
\n3. EDC17U05 support added \u2013 displaying PIN\/CS from the flash dump
\n4. For Immo IV dashboards the full CS is displayed (12 bytes) \u2013 thisway allowing easyer exchange of the dashboard.<\/p>\n

New in V27.6<\/strong>
\n1. Added dashboards Magneti Marelli UDS by OBDII.
\n2. Added possibility to make Magneti Marelli UDS dashboards by dump (EEPROM and flash \u2013 NEC V850)
\n3. Immo V vehicles with BCM2 (A4\/A5\/Q5 2008+ and A6\/A7\/A8\/Touareg 2010+) \u2013 automatic synchronization of the ID in all modules (including ELV)
\n4. Added possiblity to replace the dashboard and infotainment module for A6\/A7\/A8\/Touareg 2010+ (if old module is available by OBDII)<\/p>\n

New in V28.0<\/strong>
\n1. Integration of the distribution box for reading\/writing of EDC17\/MED17 by boot mode.
\n2. EDC17\/MED17 mileage correction through boot mode \u2013 requires the distribution box
\n3. Reading of EDC17C64 is now possible (PFlash\/DFlash, i.e. flash and EEPROM) \u2013 requires the distribution box
\n4. Added support for component protection for A6\/Q7 CD Changer (Panasonic non-MP3)
\n5. Added support for Component protection for 09-Central electric module for A4\/A5\/Q5 (8K0\/8T0)
\n6. VW UP 2015\/2016\/2017 \u2013 reading the CS and key programming is now possible
\n7. A6\/A7\/A8 all keys lost possibility to learn keys when there is no electronic steering lock (ELV)
\n8. Possibility to adapt A4\/A5\/Q5\/A6\/A7\/A8 transmission (TCU) from the BCM2 and key dump (from the car from where the replacement transmission is taken)<\/p>\n

New in V28.1<\/strong>
\n\u2013 Added dashboards VDO NEC 2013+ by OBDII.
\n\u2013 Added support for some EDC17CP64 ECUs for mileage correction<\/p>\n

New in V28.2<\/strong>
\n\u2013 Added support for reading EDC17C74<\/p>\n

New in V28.3<\/strong>
\n\u2013 Added climate control 4F0910043 0150 for component protection (by OBDII)
\n\u2013 Added explicit functionality for disable\/enable the ELV of the BCM2 cars (A4\/A5\/Q5 2008+, A6\/A7\/A8\/Touareg 2010+)<\/p>\n

New in V28.4<\/strong>
\n\u2013 EDC16 immo OFF \u2013 now made for about 30sec
\n\u2013 Added dashboards VDO NEC (Q3\/RS3) by OBDII.
\n\u2013 Added gateways for component protection for A1 (8U0)
\n\u2013 Added finding of 7th byte for Megamos48 via TA26 device
\n\u2013 Added read\/write by boot pin for motor ECUs with Infineon TC1782
\n\u2013 Added climatronic 4F0910043B 0080 for component protection by OBDII<\/p>\n

New in V29.0<\/strong>
\n\u2013 Immo III\/IV emulation \u2013 allows to build immo-related parts in other vehicle, even when the brand is different or power class is differetn.
\nWorks for the transmissions of Audi A6 2003-2010, Audi Q7 2005-2015, Audi A8 2003-2010,
\nand for all Immo III\/IV engine control units (EDC16\/EDC17\/ME7\/MED9\/MED17\/Simos benzin\/Simos PPD\/Simos PCR\/Magneti Marelli\/Delphi).
\nRequires additional Immobilizer emulator and distribution box.<\/p>\n

New in V30.0<\/strong>
\n\u2013 Added possibility to learn keys for ALL Immo III and Immo IV cars with Megamos48 transponder (both 7 and 12 bytes CS).
\nRequires distribution box with connection to the OBDII, connection to the powertrain CAN bus (where Engine Control Unit
\nand ABS are connected), and special M48 sniff transponder.
\n\u2013 Added dashboards VDO NEC 2014-2016 (both for mileage and keylearning)
\n\u2013 Added dashboards Audi A3\/TT\/R8 till 2010 with CDC32x \u2013 both for mileage and key-learning)
\n\u2013 EZS-Kessy A6\/Q7 with VAG number \u201c4F0910852B\u201d and SW version 0210 and higher is now supported for reading when a working key is present.
\n\u2013 Added dashboard MM9 with TP2.0 for mileage (build in some Golf 5 cars)
\n\u2013 Install\/Remove a device from Gateway Installation list.
\n\u2013 Improved autoscan and ClearDTCs via Gateway list
\n\u2013 Immo 3\/4 Emulator reflash (update of the firmware)
\n\u2013 Make a dealer key from Comfort module dump on Passat B6 using TA26 (when all keys are lost)
\n\u2013 Read and write of EEPROM and FLASH by boot pin for ME17.5.24 (TC1724) and ME17.5.6 (TC1767)
\n\u2013 Change mileage of MED17.5.5<\/p>\n

New in v31.0<\/strong>
\n\u2013 MQB 2014+ Mileage correction
\n\u2013 VDO NEC dashboards reworked \u2013 now modification for TFT and 2014+ dashboards can be make while in normal operation mode
\n\u2013 VDO NEC dashboards key learning \u2013 now it is possible to add an empty transponder on the ignition lock. The previous funcionality (with a programmer) is also available.
\n\u2013 VDO NEC dashboards (non MQB) with Megamos 88 transponder \u2013 can be learned to the car on the ignition lock (without programmer)<\/p>\n

New in v32.0<\/strong>
\n\u2013 MQB 2014+ Key programming (working key is required)
\n\u2013 VW Crafter EDC17 read by OBDII and by internal CAN bus<\/p>\n

New in V32.1<\/strong>
\n\u2013 Added support for component protection for climate control 8Kxxxx043 \u2013 with V850<\/p>\n

New in V32.2<\/strong>
\n\u2013 Added support for component protection for auxilary parking heater with 9S12 (Q7\/A6 2005-2010)<\/p>\n

New in V33.0<\/strong>
\n\u2013 MQB 2012-2014 Mileage correction
\n\u2013 MQB 2012-2014 Key learning
\n\u2013 Non-MQB cars with Megamos 88\/Megamos AES key learning<\/p>\n

New in V33.1<\/strong>
\n\u2013 new MQB dashboard types
\n\u2013 guided function for Start\/Stop system<\/p>\n

New in V34.0<\/strong>
\n\u2013 Added support for Mileage for A6\/A7\/A8\/Touareg completely by OBDII
\n\u2013 Reworked the procedure for adaptation of EZS-Kessy from A6 (2005-2010) and Q7 (2006-2014).
\n\u2013 Reworked the procedure for adaptation of Transmission of A6 (2005-2010) and Q7 (2006-2014).
\n\u2013 Reworked the procedure for adaptaiton of Immo V ECU for the BCM2 cars (now is possible to adapt the ECU completely by OBDII for the ECUs till 2013, for the other ECUs no more necessary to write back flash to ECU).
\n\u2013 Reworked the procedure for adaptation Immo III\/Immo IV ECU\/TCU (VN005). Now it is possible to adapt engine ECU to VDO dashboard without using EM003 emulator.
\n\u2013 ME17.5.24 is now supported \u2013 PIN\/CS is read from the internal CAN bus
\n\u2013 Added support for Component protection for 09-Central electric module with Quorriva MCU<\/p>\n

New in V35.0<\/strong>
\n\u2013 MQB All Keys Lost for VDO dashboards (covers same dashes, which are currently covered for mileage correction)
\n\u2013 MED 17.5.21\/MED17.5.25 PIN\/CS decoding
\n\u2013 EDC17C74\/EDC17CP54 immo off
\n\u2013 EDC17C74\/EDC17CP54 flash checksum calculation
\n\u2013 VW UP 2015\/2016\/2017 \u2013 Added new version for key-learning
\n\u2013 Improved Kessy decoding (Audi A8\/Touareg\/Phaethon\/Bentley 2003-2010) \u2013 for the cases where the production year of the Kessy is about 2006\/2007.
\n\u2013 Reading the PIN\/CS from Magneti Marelli 9GV engine control unit (requires DSBox)
\n\u2013 Read\/write immobilizer data for VDO MQB dashboards by OBDII (working key is required)<\/p>\n

New in V36.0<\/strong>
\n\u2013 VDO NEC + 24C32\/24C64 \u2013 entering into service mode using ZN059 cable (no need of EEPROM reading\/writing)
\n\u2013 VDO Micronas CDC32xx+24CXX \u2013 reading immo data with ZN060\/ZN061 cable (no need of MCU\/EEPROM reading\/writing)
\n\u2013 MQB All Keys Lost if the CS of the dashboard and of the ECU are available.<\/p>\n

New in V36.1<\/strong>
\n\u2013 Reflashing from FRF\/SGO \u2013 possibility to change reflash parameters<\/p>\n

New in V37.0<\/strong>
\n\u2013 MQB Read CS by OBDII (VDO TFT, VDO Virtual Cockpit, JCI)
\n\u2013 MQB All keys lost \u2013 added possibility to make it if also the car is with automatic transmission
\n\u2013 Read MQB transmission control units \u2013 Read CS, Clone\/Restore
\n\u2013 Read DL501 Generation 2 transmission control unit (A6\/A7 2013+) \u2013 Clone\/Restore
\n\u2013 Replace MQB dashboard \u2013 possibility to clone an existing dashboard
\n\u2013 Adapt modules to MQB cars \u2013 Engine control unit, Transmission control unit, Steering lock
\n\u2013 Possibility to adapt manually any Immo V parts (MQB\/BCM2) if the CS of the parts is known
\n\u2013 For cars with Immo IV dashboard (CS is 12 bytes) and Immo V engine control unit (CS is 16 bytes) \u2013 e.g. Caddy\/Tiguan\/Touaran\/Transporter 2016+ \u2013 possibility to extract the CS (16 bytes) of the key and of the ECU from the CS of the dashboard
\n\u2013 Unsuppoprted VDO NEC dashboards added \u2013 both for mileage and keys (e.g. VW Fox)<\/p>\n

New in V37.1<\/strong>
\n\u2013 Read MQB transmission control units \u2013 Read CS, Clone\/Restore \u2013 added some unsupported DQ200x modules<\/p>\n

New in V37.2<\/strong>
\n\u2013 Some fixes for the MQB dealer key preparation<\/p>\n

New in V37.3<\/strong>
\n\u2013 Delphi DCM3.7 added for reading \u2013 PIN\/CS\/Flash<\/p>\n

New in V38.0<\/strong>
\n\u2013 Component protection generation 2 \u2013 new online functionality used for adaptation on second hand modules for Audi (A4\/A5\/Q5 2007-2017, A6 2003-2018, A7 2010-2018, A8 2010-2018, Q7 2005-2015),
\nVW Touareg 2010-2018 and Audi\/VW\/Skoda MQB. Includes also MQB, but doesn\u2019t include MLB cars.<\/p>\n

New in V38.1<\/strong>
\n\u2013 Added modules for diagnostic for the latest MLB platform (A6\/A7\/A8 2017+, Q7 2015+)<\/p>\n

Note: Does not support online functions<\/p>\n","protected":false},"excerpt":{"rendered":"

Tools bought SVCI 2020, there is updated information: New in V7.4: \u2013 Automatical recognition of swapped files in dump tool. In the most cases the no need to flip bytes manually \u2013 Added support for unsupported till now subtype of… Continue Reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":6207,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[1172],"tags":[1177,1175,1176,1173,1174,1559],"_links":{"self":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/6206"}],"collection":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/comments?post=6206"}],"version-history":[{"count":1,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/6206\/revisions"}],"predecessor-version":[{"id":6208,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/6206\/revisions\/6208"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/media\/6207"}],"wp:attachment":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/media?parent=6206"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/categories?post=6206"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/tags?post=6206"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}