{"id":7105,"date":"2021-01-11T07:33:56","date_gmt":"2021-01-11T07:33:56","guid":{"rendered":"https:\/\/www.cnautotool.com\/blog\/?p=7105"},"modified":"2021-01-14T09:32:00","modified_gmt":"2021-01-14T09:32:00","slug":"how-to-download-and-install-scania-vci3-sdp3-2-46-1-on-win7","status":"publish","type":"post","link":"https:\/\/www.cnautotool.com\/blog\/how-to-download-and-install-scania-vci3-sdp3-2-46-1-on-win7\/","title":{"rendered":"How to Download and Install Scania vci3 sdp3 2.46.1 on Win7"},"content":{"rendered":"

What is Scanica SDP3?<\/strong><\/p>\n

Scania SDP3 is a PC-based diagnostics application software for Scania trucks, bus chassis and Scania engines. The Scania SDP3 application includes fault code reading, assisted trouble shooting, parameter settings and more. SDP3 shall be installed on a PC\/Windows platform, and connect to the vehicle through a vehicle communication interface (VCI).<\/p>\n

\"\"<\/a><\/p>\n

Why Choose Scanica SDP3?<\/strong><\/p>\n

Today\u2019s vehicles and especially today\u2019s electrical systems with their control units and distributed functions place greater demands on tools and technicians. It is both time-consuming and complicated to carry out troubleshooting on vehicles of such complexity. SDP3 has therefore been designed to support the mechanic during troubleshooting and thus reduce downtime.<\/p>\n

SDP3 also supports the troubleshooting of industrial and marine engines.An advantage of SDP3 is that there are more possibilities than before for the individual item, i.e. the vehicle or engine to which you are connected, to give a description of itself. SDP3 makes use of this and only displays information relevant to the vehicle\/engine to which it is connected.<\/p>\n

Scania SDP3 Software Function List:<\/strong>
\nCheck and adjustments
\nConversion
\nMaintenance
\nCampaign
\nBodywork
\nFault Codes
\nFault Reporting
\nProgramming of Control units<\/p>\n

Scania SDP3 supported modification of ECU data<\/strong>
\nEMS \u2013 Engine management system.
\nGMS \u2013 Gearbox management system.
\nRET \u2013 Retarder system.
\nAWD \u2013 All wheel drive system.
\nCLS \u2013 Clutch Control.
\nEEC \u2013 Exhaust Emission Control.
\nCOO (COO7) \u2013 Coordinator.
\nBWS (BCI1) \u2013 Bodywork system.<\/p>\n

Scania SDP3 supported resolving trouble codes to text description:<\/strong>
\nEMS (S6, S7, S8).
\nGMS (OPC4, OPC5).
\nRET (RET1, RET2).
\nAWD (AWD1).
\nEEC (SCR1, EEC3).
\nCOO (COO6, COO7).
\nHMS (HMS1).<\/p>\n

Scania SDP3 interesting options:<\/strong>
\nAdBlue ON\/OFF.
\nEGR ON\/OFF.
\nChassis ID\/VIN Change.
\nImmobilizer ON\/OFF.
\nTruck Power INCREASE.
\nECU Recovery.
\nECU Reset.
\nECU Unlock.<\/p>\n

Scania SDP3 Support Language:<\/strong>
\nEnglish, German, Spanish, French, Japanese, Dutch, Persian, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian, Chinese.<\/p>\n

Scania SDP Installation Requirement:<\/strong>
\nSupport Win7 64 bit system.WIN 10 32bit WIN10 64 bit (Tested by individual, so try on your own risk).
\nNeed Netframework 4.5 installed on system. windows 7 or 8 will be better.
\nIn order to install SDP3, administrator rights are required.<\/p>\n

Note: The USB key and VCI must not be connected to the computer during the installation of SDP3, especially if SDP3 is not installed for the first time.<\/p>\n

Free download Scania SDP3 2.46.1<\/strong>
\n1.Mega link:
\nhttps:\/\/mega.nz\/file\/a1BQHJRK#ydE4TiWWThdiRmhJqoG3WaG4tZUw0azejWm-8YklVI4<\/a>
\nNo password! (Security unknown)
\nSize: 893.5 MB<\/p>\n

Chinese weiyun link:
\nhttps:\/\/share.weiyun.com\/PdSLugZp<\/a>
\nPassword: 6u56j6
\nSize: 1005.28 MB<\/p>\n

Heavy duty scanner<\/a> Scania Diagnos & Programmer 3 Version 2.46.1 Update Feature:<\/strong>
\nNew general features
\nNo major new general features in the issue.
\nNew system-specific features
\nNew user function warns of open door
\nThe cab door open warning is a new user function for all trucks in the P, G, R and T series.
\nThe UF1157 user function warns if any of the cab doors are open. This is because there is a potential safety risk to people inside and outside the vehicle if a cab door is open.
\nThe new function can be found under User functions > Driver warning >UF1157 Cab door open warning.
\nSystems affected by the new function are ICL3, COO8 and DCS1.
\nNew parameter for gas vehicles
\nA new parameter has been created for gas vehicles, Over-acceleration protection bypass.
\nThe parameter can be found under Electrical system > Engine management system > EMO2 > adjustment.
\nThe new parameter applies to vehicles with power take-offs and has self-regulating software.
\nSystem-specific changes
\nRevised text in installation test
\nChanges to the menu option text in the installation test have been introduced in the function wizard Installation test for industrial engines.
\nSystems affected are EMS\/EME1. More specifically, this applies to StageV industrial engines.
\nThe menu option Excessive nitrogen oxide levels in the exhaust gases has been renamed and is now called: Emission-related faults (MIL).
\nThe change has been introduced to make the text more consistent with the text in the installation manual.SDP3 certificate
\nHandling of SDP3 certificates will change from 1 November.
\nIn connection with this, the certificate needs to be reinstalled. For this reason, a new version (v14) of the document Certificate for services in SDP3 is available for download from Scania Technical Information Library.
\nThe change applies to all use of services in SDP3.
\nAddition to information about compression tests
\nAn addition has been made to the information about the requirements that must be satisfied in order to run the compression test on Scania
\nEngines engines with S8 and EME1, included in the EMS system.
\nThe text that has been added is CAN communication between starter motor and engine control unit must be active.
\nFacilitated troubleshooting of the charge air pressure system
\nFive signals have been added to the signal list for OCS1. The signals are under Signal logging, OCS1.
\nThe signals have been added to facilitate troubleshooting of the charge air pressure system.<\/p>\n

The signals that have been added are:
\n\u2022 Adaptive correction of charge air pressure 0-1,200 rpm
\n\u2022 Adaptive correction of charge air pressure 1,200-1,400 rpm
\n\u2022 Adaptive correction of charge air pressure 1,400-1,600 rpm
\n\u2022 Adaptive correction of charge air pressure 1,600-1,800 rpm
\n\u2022 Adaptive correction of charge air pressure, over 1,800 rpm
\nThe affected products are trucks and buses that run on gas, both NGS and NCG.<\/p>\n

Need Netframework 4.6 or up version installed on system.(After installation,need restart your pc)
\nIn order to install SDP3, administrator rights are required.<\/p>\n

How to Install SDP3 V2.46.1 on Windows 7<\/strong>
\n1.Copy and paste Scania SDP3 2.46.1 software folder to desktop<\/p>\n

2.Install Adobe Reader 9.2<\/p>\n

\"\"<\/a><\/p>\n

3.Run NDP462 setup as administrator and install Framework 4.6.2 setup<\/p>\n

\"\"<\/a>
\n4.Run Scania Diagnos & Programmer3 2.46.1.exe as administrator to install setup<\/p>\n

\"\"<\/a>
\nNote: Make sure the VCI unit and SDP3 USB key are disconnected from the computer before continuing with this installation.<\/p>\n

5.Run Prerequistes.cmd as administrator to check operation is completed<\/p>\n

\"\"<\/a><\/p>\n

6.Restart computer<\/p>\n

7.Open software folder and FIX file to run Hardware ID Reader.exe<\/p>\n

Copy and paste the ID to eobdtool.co.uk engineer to get activation ID<\/p>\n

\"\"<\/a><\/p>\n

Merge registration key<\/p>\n

8.Open -install_cmd file on C:\/Scania 2.46.1\/FIX\/x32<\/p>\n

Note: It depends on the operating system.<\/p>\n

9.Connect Scania VCI3<\/a> interface with computer<\/p>\n

Install device driver software<\/p>\n

\"\"<\/a><\/p>\n

Once the device driver software has been installed successfully, it will show the related message at the bottom right of the screen.<\/p>\n

\"\"<\/a><\/p>\n

10.Restart computer<\/p>\n

11.Copy 2 files in C:\/Scania 2.46.1\/FIX\/Fix 2.46.1 and replace that in C:\/Program Files\/Scania\/SDP3 folder<\/p>\n

\"\"<\/a>
\n11.Run Time.exe in FIX folder as administrator<\/p>\n

Crack SDP3 time<\/p>\n

\"\"<\/a>
\n12.Restart computer<\/p>\n

13.Run SDP3 software on desktop<\/p>\n

Follow the prompt to update VCI until the process is done
\n\"\"<\/a><\/p>\n

14.Open SDP3 Configurator on desktop to select language you desired<\/p>\n

\"\"<\/a>
\n15.Now the software is ready to use, you can do any function supported.<\/p>\n

<\/div>\n
<\/div>\n","protected":false},"excerpt":{"rendered":"

What is Scanica SDP3? Scania SDP3 is a PC-based diagnostics application software for Scania trucks, bus chassis and Scania engines. The Scania SDP3 application includes fault code reading, assisted trouble shooting, parameter settings and more. SDP3 shall be installed on… Continue Reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":7117,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[748],"tags":[1691,1240,856,1241,1690],"_links":{"self":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/7105"}],"collection":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/comments?post=7105"}],"version-history":[{"count":4,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/7105\/revisions"}],"predecessor-version":[{"id":7122,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/posts\/7105\/revisions\/7122"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/media\/7117"}],"wp:attachment":[{"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/media?parent=7105"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/categories?post=7105"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.cnautotool.com\/blog\/wp-json\/wp\/v2\/tags?post=7105"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}