VCM II VCM2 for Ford V101 and Jaguar & Land Rover V143 Diagnostic Tool 2 in 1

VCM II VCM2 for Ford V101 and Jaguar & Land Rover V143 Diagnostic Tool 2 in 1 

Highlights V101 for Ford VCM II and Jaguar Land Rover Diagnostic Tool:
1. Newest IDS Software Version: V101, JLR version:V143
2. Three models available: Ford, LandRover and Jaguar
3. It provides full dealer diagnostic capabilities for most 16 pin Ford and Jaguar Land Rover , including all new 2016 Ford vehicles
4. Simple and easy operation.
5. Best Quality, better than J2534 mode interface.
6. Multi Languages: Deutsch,English,Espano,francais, italiano  nederlands, Portugues(European) Russian,Japanese,Chinese

 
VCM II Diagnostic Tool Descriptions:
1. JLR Approved device
2. Replacement for JLR SDD VCM
3. Covers CAN, & ISO9141 vehicle networks
4. 12ft USB cable as standard included
5. Ford VCM II diagnostic tool is the new Ford OEM diagnostic tool
6. It is designed as a replacement pass-through vehicle communications device that can be used for the majority of the JLR SDD diagnostic applications
7. It provides dealer-level diagnostics using the IDS software
8. The CFR replaces the Vehicle Data Recorder (VDR).
9. It will be required for all new 2016 Ford vehicles and is backwards compatible with most 16 pin Fords.
10. It supports the Vehicle Measurement Module (VMM) and new Customer Flight Recorder (CFR).                                          
11. It has shock resistant rubber ends, making it suitable for garage and workshop environments. 
12. The VCM II and IDS, along with a dedicated laptop, provides full dealer diagnostic capabilities for most 16 pin Fords.                                     
13. It is the brand new diagnostics interface from Fordfor use with the Integrated Diagnostics Software (IDS).     
14. The CFR is an optional cable that allows the VCM II to monitor and record live data streams. This provides an advantage for technicians when diagnosing
 
VCM II Jaguar & Land Rover Vehicle Coverage:

JLR Vehicles	Supported?
Defender	Yes
Discovery /LR3/LR4	Yes
Range Rover Sport & New Range Rover Sport	Yes
Range Rover	Yes*
New Range Rover	Yes
Freelander /LR2	Yes
Evoque	Yes
XJ – X300/X308	No
XJ - X350	No
XJ - X351	Yes
XJS	No
XK – X100	No
XK - X150	Yes
XF	Yes
S-Type	No
X-Type	No
F-Type	Yes
(Yes) – Vehicle line fully supported:   (Yes*) - Vehicle line fully supported apart from viewing Data logger signals from both ECM and TCM  modules simultaneously on 2006MY variants :   (No) - Vehicle Line Not supported

VCM2 Diagnostic Tool Functions:
1. Program New Keys
2. DPF Regeneration
3. Brake Bleeding
4. Injector Coding
5. Automatic vehicle recognition
6. New Software Re-flash for Existing ECUs
7. All Other Dealer Functions
8. Steering Angle Resets
9. Guided Fault Finding
10. Read & Clear Diagnostic Trouble Codes (DTCs)
11. Set, Adjust or Remove Speed Governors
12. Live Data-stream with Recording & Playback Functions for Main ECUs
13. The VCM2 for Land Rover connects directly to the vehicle OBDII (diagnostic) connector and then to a laptop via a USB cable for use with SDD.
14. Once the J2534 DLL files are loaded, this product will allow normal operation with the JLR SDD diagnostic tool.  
15. The device is designed as a replacement pass-through vehicle communications device that can be used for the majority of the JLR SDD diagnostic applications. 
16. Only SCP communications are not possible with this device.
17. Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
 
How Does the VCM2 Diagnostic Tool Operate?
1. Please read the user manual firstly before using, install the software after watching the video or user manual in the DVD
2. Connect the J2534 device to the vehicle OBDII connector (the device powers from the vehicle).
3. Connect the 12ft USB cable to the device and the other end to the SDD laptop.
4. The red vehicle power (PWR) LED will illuminate to show that the device is powered.
5. During communication with the vehicle the status (STS) LED will flash green.
6. The device interacts with the SDD diagnostic tool in the same way as the existing VCM.
 
VCM II for Ford JLR  Package Including:
1pc x VCM2 interface
1pc x OBD2 Cable
1pc x USB Cable
2pcs x CD with latest software for Ford and JLR
1pc x Carrying Case

 

User Comment(Total 1 Customer Reviews)

• by Adam Zygmunt,Feb 11,2019
  

  do this product support Portugues language ?

  Reply #1 by Cara Feb 11,2019
  Yes , it support this language , you can check the details on our website , thank you
  
  Cara

  ---

Total 1 records, divided into1 pages. First Prev Next Last

Rank:
Your first & Lat Name:
Your E-mail Address:
Review detail:
Verification code: