Super CN900 Mini Auto Key Programmer Plus TOYO Key OBD II Key Pro for 4C 46 4D 48 G H Chips

Super CN900 Mini Auto Key ProgrammerPlus TOYO Key OBD II Key Pro for 4C 46 4D 48 G H Chips

CN900 Mini or ND900 Mini has no connector,how to connect with OBD? Bluetooth connection!

CN900miniOBD connect with cn900mini via Bluetooth, and operate on cn900mini screen.
1.TOY-G(80BIT) all key lost,write chips!
2.TOY-8A(128BIT) all key lost, write chips!
3.TOY-smart card all key lost, write chips!
4.DAI-G(80BIT) all key lost, write chips!
5.No need to take out instrument desk!

To avoid damaging the car system.

TOP 7 Reasons to get CN900 Mini Transponder Programmer:
1. Directly copy 4C and other chips like Toyota 4D67.
2. Supports copy 4D chips,46 chips,72G chip.
3. Recognize locked ID48 and can unlock ID48. 
4. Language: English/Chinese
5. Copy 4D chip and Toyota G chip via CN5 chip
6. CN900 MINI supports all function of CN900, no need to connect with decoders to copy 4D,4C,46,G chips.
7.  Free Update on www.cn900.net

Note: Toyota G chip copy needs tokens,one tokens for one copy. Mini CN900 comes with 12 free tokens, after you use up 12 tokens,please contact us for another free 12 tokens. For more tokens, you need to pay. Please kindly notice, thank you.

Mini CN900 Firmware Update to V1.13 (July 29,2016)
* ADD: Detect 8A chips (Toyota H) and distinguish between master and vice
* ADD: Toyota Smart Key renew
* Bug fixes: T5-20 copy 11, 12, 13, 33
* Bug fixes: 42 copy and blank PCF7935 copy 42 support


How to update Mini CN900 key programmer?
1. Browse to CN900 Mini official website, register and download CN900_MINI_Updater_v1.9
2. Or you can directly download updater v1.9 here
3. Delete previous updater file (updater v1.8 etc)
4. Open the updater v1.9 setup.exe
5. Click on Update button.

6. The main module of firmware is updating. Wait for upgrade procedure complete

Introduction：
● RFID identifly 125KHZ  134.2KHZ  13MHZ
● RF data reception 27-900MHZ
● RF radio frequency identification,support all kinds of remote controls
● RF Data transmission, supports all kinds of remote control simulation test 
● various types of vehicle anti-the fault detection, matching detection
● Portable Super long standby
● support four kinds of frequency 850/900/1800/1900MHZ
● GSM/GPRS SIM
● USB2.0
● Bluetooth4.0

Super CN900 Mini Auto Key Programmer     
1.Can directly copy 4C and other chips like Toyota 4d67. 
2. Support copy 4D chips.
3. CN chips can be copied many times.
4. Can recongize locked ID48 and can unlock ID48.
5. Support copy 46 chips.
6.Can Read TOYOTA H Key.
7.Toyota G Chips Clone.

Main Features 
Function 1: 
1) Read out the chip code for 11 12 13 33 T5  40 41 42 44 45 46 48 4C 4D 8C and 8E chips. With the detail format for ID 48 and 4D Chips.
2) New identify functions for Toyota "G " chip key  (year: 2010) (Chip: 4D-72).
And it will show if the key is the main key or the vice key for Toyota, and later will add new identify function for the Chinese Car.
Function 2:
It can identify Toyota smart key, and read out the data.
Function 3:
It supports on copying the chips (11 12 13 33 T5 41 and 42) and parts of 44 and 45.
Using "FREE " dedicated chips can copy none battery 4C and 4D chips directly.(Remark :cn1(4C),cn2(4D) is the name of  special chip)
Function 4:
Connecting with Chinese PC software, it can save the read key code data unlimited.
Function 5:
Support on the chip programming: with the inner function of HITAGETI, it can write ID 46 Renault Crypto chips.
Function 6:
Without removing the ECU (Benz W140), it can start the chip.
Function 7:
It can unlock the 48 chips except the crypto lock 48 chips.
Function 8:
Support on the pin code calculating for Hyundai and Kia (before 07 year), by using the Last 6 Codes of VIN Number.
Function 9:
Support on starting the key and calculating the pin code for more than 60 kinds of cars.
Support on programming all kind of Fiat key, such as (11, 13 and 33), These 3 kinds of 48 chips anti-theft way.
Function 10:
It Upgrade to identify HONDA_46 CRV_46/CIVIC_46/ Mitsubishi 46
Ordinary 60 can be programmed to be 66/67/68/71/74
Function 11:
It Upgrade to copy CN1 (4C), CN2 (4D) chip .And size is 6mmX12mmX4mm
Support on the software update, such as adding new function for copying the induction card for Electronic Gate.
Function 12:
Can copy all ID46 chip:
BMW 46 chip,ACURA 46 chips,Honda CRV  FIT(NEW)  Accord(2008) Civic 46 chips;Mazda haima 46 chips;Mitsubishi 46 chips;Buick GMC CRUZE 46  chip. New Chery tiggo A3 46  chips; Nissan TIIDA TENNA LIVINA Sylphy  Nissan QASHQAI Q35 46 chip. Brilliance 46 chip.Peugeot/Citroen 307  206 -46 chips;Triumph  Senna 406 (2001year);Picasso 46 chip.Suzuki swifts  SX4  46 chip.Land Rover FREELANDER 46 chip. Geely dedicated 46 chip.
Function 13:
can copy 4D chip
Function 14:
Toyota G Chips Cloner

TOYO Key OBD connect with cn900mini by Bluetooth, and operate on cn900mini screen.

1. TOYO-G(80bit) all key lost, write chips!
2. TOYO-8A(128bit) all key lost, write chips!
3. TOYO-smart card all key lost, write chips!
4. DAI-G(80BIT) all key lost, write chips!
5. NO need to take out instrument desk! to avoid damaging the car system.
 
TOYO Key can program new key on:
Toyota ID72(G) all key lost
Toyota 8A(H) all key lost

In the coming days, TOYO Key is able to program key on:
Toyota smart card all key lost
VW Audi 48 chip all key lost

Toyota ID72(G) and 8A(H) all key lost, how to program new key by TJECU CN900Mini and Bluetooth TOYO Key OBD II key pro, here 4 steps to follow:
Step 1, Program new key then turn on ignition, then plug TOYO OBD into the car.
Step 2, Use the option 72G of CN900 MINI to connect, then start to initialize data, the immo indictor is on for a long time, then follow the CN900Mini prompt to operate.
Step 3, It will prompt “Complete/ Success”, and then the Immo indicator is on for a long time again.
Step 4: Turn on and off ignition for 5 times quickly, immo indicator is off.
Done.

How to activate TOYO Key OBDII to work with CN900 Mini in order to Program Toyotda G Key?
Before programming Toyota G all keys lost, you need to activate and register TOYO Key OBDII with CN900 Mini.

To use TOYO KEY OBD II KEY PRO with cn900mini/ND900 mini, you are required to update cn900mini/ND900 mini hardware version to 1.20.2.15 or higher version.

Step 1: connect Cn900mini to PC, and updated to Version 1.20.2.15(Pic 1), then back to CN900 main interface(Pic 2), click”OBDII Comm.”

Step 2: Click”ID72(G) IMMO reset”(pic3)

Step 3: Cn900mini main interface display as pic4 (CN900 Mini will require to enter activation code), please take a photo of this and send to the salesmen which you contact, our salesmen will send this picture to our engineer, they will calculate the activation code, after the customer get the activation code and insert, it will register successfully.

Remark:  one activation code just can register one CN900mini machine, it can not register many cn900mini, please operate according this user manual, If the customer does not operate in accordance with the instructions of the machine damage to a series of problems, customers have to bear the cost of freight and maintenance.

Mini CN900 Transponder Key Programmer Package Includes:
1pc x Mini CN900
1pc x TOYO KEY OBD II KEY PRO

User Comment(Total 0 Customer Reviews)

• No comment

Total 0 records, divided into1 pages. First Prev Next Last

Rank:
Your first & Lat Name:
Your E-mail Address:
Review detail:
Verification code: