2013 GM Tech2 GM Scanner with Candi and GM Opel Tis

GM Tech2 GM Scanner is the special diagnostic tool for GM Vehicles. It comes with Authentic GM software and provides support for on-board diagnostics on all GM systems. It’s with Large, easy-to-read backlit screen. The Tech 2 is designed for use by trained service personnel only. It has been develped for the sole purpose of diagnosing and repairing automotive systems with electronic controls and interfaces. Tech 2 is not only for GM vehicles, it also supports Opel, Suzuki, Isuzu, Holden export and Australia Holden. But you need to buy more 32 MB PCMCIA Card because each card can be with only one software.
 

Here is the details coverage year and version for each Tech-2 software:
1. GM 1991-2013 V32.008 software
2. OPEL 1997-2013 V151.001 software
3. SAAB-2010 software
4. SUZUKI 2006-2010 V107.021 software
5. ISUZU 1996-2009 V01.210.02 software
6. Holden Export 1999-2012 V147.000 software
7. Australia Holden1999-2012 V143.000 software
 

Many users will meet some problems when using this GM Tech-2. For example, If it can not find Candi after power it on, please take out the VCI and put it in again to try. If the screen is too dark, you can adjust the brightness and contrast like the following steps:
1. Press the Shift key once(amber status indicator light above Shift lights up).
2. Use up and down arrows to adjust screen brightness and contrast.
3. Press Shift key again when desierd brightness is readched(status indicator light above Shift is off).
If the vehicle connection is failed, please check whether you connect the candi very well and whether you have seen the Candi Module is attached after you power it off.
If it notices you that it needs password when you are installing GM or Opel Tis, please remember to contact us for cracked files if you buy it from cnautotool because it is not in the CD.