VAG ECU TOOL

VAG ECU TOOL

The tool for the complete access to all EEpromdaten with VAG-engine control units of type EDC15 and ME7.
1. Read and write access to the EEprom.
2. Reading the secret odometer (if stored in the engine control unit)
3. Immo-off function, login display, VIN change - everything about the diagnosis socket - not removing the ECU.
4. With the write function is motor control "cloning" - no need to teach.
5. Indispensable for workshops, recovery or Chiptuning. 

Functions of the program:     
1. serial EEprom read and save 
2. EEprom checksum checking and correction 
3. IMMO on / off 
4. EEprom from a file and write (clone function) 
5. Read / write access to the login 
6. Read / write access to the chassis number 
7. Read / write access to the Immobilizernummer
8. Kilometers Motronic in the read and write (if available)    

In the ME7 .**controllers can also perform the following functions:   

Offset channels 
Mixture enrichment 
Idling torque change 
Lambda value 
Idle speed change 
Correct charge (only for Turbo engines) 
Ignition timing change    

Supports the following types of motor control of BOSCH: 
1. EDC15 
2. EDC15VM 
3. EDC15P 
4. EDC15P +   BOSCH ME7.5 
5. BOSCH ME7.5.1 
6. BOSCH ME7.1 
7. BOSCH ME7.1.1   

User Comment(Total 0 Customer Reviews)

• No comment

Total 0 records, divided into1 pages. First Prev Next Last

Rank:
Your first & Lat Name:
Your E-mail Address:
Review detail:
Verification code: