Wellon GP-1 universal programmer

Wellon GP-1 universal programmer

This 48-pin USB Universal Standalone Programmer is for a range of devices, including PIC microcontrollers, EEPROMs, dsPIC, AVR and other microcontrollers like AT89, plus PLDs and flash memory.
The GP-10 USB Universal Standalone Programmer has PC connection and standalone mode - once the USB Universal Standalone Programmer is loaded, just insert the device and program using button.
The USB Universal Standalone Programmer is very fast because it has USB 2.0 interface for Hi-speed data transfer. 

FEATURES:
*Dimension:160*180*32mm,weight:425g. 
*Electrical spec. of the AC adapter: AC input 100V to 240V, 50/60Hz, DC output 9V/2.0A; power:18W 
*48 Pin ZIF socket with universal pin-drivers. 
*Support PC hosted mode and stand-alone mode 
*Interface with LAPTOP, PC or compatibles through USB port 
*Accepts standard file formats: JEDEC, INTEL (Extended) HEX,HOLTEK,EMC(.CDS),INTEL HEX16, Motorola S record 
*Manages 16 and 32-bit word split (Set Programming) 
*Features Test Vector capability and multiarray fuse map editor 
*Test TTL/CMOS logic ICs and Dynamic/Static Random Access Memory devices 
*Optimum programming for each individual device 
*Automaticly Identifies the manufacturer and type of E(E)PROMs, Auto identifies TTL/CMOS logic IC 
*Device insertion and poor-pin-contact check 
*Support 1.5v Low voltage devices 
*Not need exterior adapter for mostly devices. 
*Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP adapters 
*Auto-run mode starts programming automatically upon detection of chip insertion 
*Supports Windows XP / Vista / Windows 7 (32bit and 64bit) 
*Supports eight languages,such as Chinese(Simplified),Chinese(Traditional),English,Korean,Poland,Italian,Portuguese and Dutch  

Standalone Mode
GP-1 can be used as a normal universal programmer connected to PC or in standalone mode. In this mode, you load the USB Universal Standalone Programmer from PC and then just press Go button on USB Universal Standalone Programmer to carry out programming operations. 
Standalone mode can be set to convential mode where you press the GO button to program the next device or into Mass Production mode. In this mode, once GO button is pressed once, inserting a new chip will automatically start the program cycle. 
  
DEVICE SUPPORT:
PROM: N/CMOS E(E)PROM, Series E(E)PROM, and FLASH Memory 
PLD: CPLD, EPLD, GAL,PEEL,PALCE and more 
Microcontroller: Atmel, Intel, Microchip, Signetics, Zilog, etc. 
 
IC TEST:
TTL (74 series), CMOS (40/45 series) Logic IC 
DRAM (4164, 41464 ...), SRAM (2114, 6116 ...) memory device 
The full device support can be seen on weilei.com. The device support list includes information for socket adapters required for different packages. 
Device support in Standalone mode is smaller and also can be seen on weilei.com. 
  
Software Features 
The software is very comprehensive, with lots of features that make it ideal for both production and development. 
SELECT device includes package information, adapter type, part number description etc. 
LOAD file supports checksums, comprehensive file formats and address location 
Flexible Verify options, including VCC+/-10% 
Blank check, Erase, Program, verify, Auto Program, buffer edit and much more 
Serial numbers and statistics 
The Programming software can be downloaded on weilei.com.cn 

User Comment(Total 0 Customer Reviews)

• No comment

Total 0 records, divided into1 pages. First Prev Next Last

Rank:
Your first & Lat Name:
Your E-mail Address:
Review detail:
Verification code: