Adblue Emulator for MAN Truck Euro6

Adblue Emulator for MAN Truck Euro6

EURO6 Ad-Blue Emulators Disable system:
– AdxBlue system (Fully)
– AdxBlue NOX sensor
– DPF system
– DPF temperature sensors
– DPF regeneration

Kindly note: It is possible to disable AdxBlue system by installing an AdxBlue emulator (programmable device) into the vehicle. You can switch it on/off anytime.

After installing Euro6 emulator, What you can remove?

– DPF sensors – YES
– NOx sensor – YES (only in DAF don’t remove first NOx sensor !!!)
– Ad-blue temp. sensor (s) – YES
– Ad-blue pump – YES
– Ad-blue level sensor – YES

– Ad-blue ECU – YES

How to use EURO6 Ad-Blue Emulators:

Emulator Man Euro 6 does not need to be learned. You install emulator under the metal cover of Ad-Blue Pump on the right side behind the cab, and disconnect plug from Ad-Blue Pump and connect emulator.

Next, you need to remove the fuses:

F894(Multisensor In Ad-Blue tank)

 

F738 (+30 Signal of Ad-Blue pump)

 

F1084 (NOx sensor Upstream)

 

Fuse F737 is now fuse of emulator.

 

Fuse F1109 is the fuse of NOx sensor Downstream and A1191 mufler temperature sensor. This sensor needs to work correctly for DPF regenaration.

 

Finally, you need to remove Power from NOx downstream sensor. There are two ways options, one is to cut pin 1 in NOx sensor plug, the other way (better) is toremove pin 10 in X3212 plug. This plug is visible on rear of engine on the right side. This is TE plug (16 pin) wiht yellow key.

Package List:

1pc x Man EURO6 Ad-Blue Emulator

User Comment(Total 0 Customer Reviews)

• No comment

Total 0 records, divided into1 pages. First Prev Next Last

Rank:
Your first & Lat Name:
Your E-mail Address:
Review detail:
Verification code: