Original Xhorse V5.0.4 VVDI PROG Programmer

Download

vvdi-prog-user-manual.pdf

Original Xhorse V5.0.4 VVDI PROG Programmer 

Buy VVDI-Prog programmer, get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service.

VVDI Prog Highlights:

1. Support R&W lots of chips, include MC9S08 series, MC68HC(9)12 series,MC9S12 series, V850 series, H8X series, R8C series, PCF79XX series and most eeprom chips

2. Support chip data verify, check blank function

3. Support data file compare function

4. Support R&W BMW N20, N55 ECU (show ISN directly)

5. Stable R&W MC9S12XE series chips (5M48H/1N35H/2M53J/3M25J etc.)

6. Support renew PCF79XX remote, currently support BMW E/F series

7. Lots of connection diagram

8. VVDI Prog Read BMW ISN. Read ECU data and show the ISN automatically

9. Multi-language: English, Arabic, Czech, French, Italian, Polish, Portuguese, Russian, Spanish, Turkish & Chinese Simplified

10. Buy VVDI-Prog programmer, get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service.

VVDI Prog Features:
1. Built-in update software: Make VVDI Prog update timely.
2. High-speed USB communication interface: Make software automatically connect.
3. Smart operation mode: possible causes of error will be listed
4. Reserve ports: For future update.
5. Self-test function: Check if the machine works well or not.
6. Power supply: Through USB cable, software will automatically prompt if the external USB power supply is needed

Notice:
1. Do Not click firmware upgrade in VVDI Prog software, or it will give communication server error. The firmware is fixed at 2.0 version, no need to update.
2. Please do wiring 100% same like the connection diagram in VVDI Prog software, DO NOT lengthen the connection lines with other parts. Or will fail to read.
3. Voltage require: 12V/3-5A

Xhorse VVDI Programmer Information Contents:

VVDI Prog Latest Update Information:
VVDI Prog V5.2.9 (2023-07-04)
VVDI Prog V5.2.9 Software Free Download Password:123456
* This version DON't need update firmware
* Modify GL8 BCM(2017--)-READ,
GL8 BCM(2017--)-WRITE,
options in
->:
Optimize the process
* Modify HOWO A7,
HOWO SITRAK 2083,
HOWO T5,
HOWO T5H,
HOWO T7H,
HOWO TX,
Sino Trunk2083,
SITRAK 6011,
SITRAK 6021,
SITRAK C5H SQUARE REMOTE,
SITRAK C7H,
SITRAK C7H B5,
SITRAK RHOMBUS REMOTE,
SITRAK T7H
options in
->:
Optimize the process
+ Add XINGMA 315
option in
->
+ Add QILIN VH
option in
->
+ Add SITRAK C7H 540
option in
->

VVDI Prog V5.2.8 (2023-05-31)
This version DON't need update firmware
Modify MQB-LOCK(D70F35xx)-WRITE, VW-4th-NEC35XX-WRITE, options in->:
Optimize the process
+ Add GL8 BCM(2017--)-READ,
GL8 BCM(2017--)-WRITE
options in
->
+ Add Rover 2017 BCM(MPC5746G),
Rover 2017 BCM(MPC5748G)
options in
->
+ Add SPECIAL CV(R5F2138A)(2018)
option in
->
+ Add EXCELLE SRS(XC2336A-72)(2015)
option in->
+ Add BENZ W207 REAR MODULE
option in
->
+ Add ROVER-SHIFT-GEAR-MODULE,
RANGE-ROVER-SEAT-MODULE2
options in
->
+ Add ROEWE-I6-ESL(SPC5602D)(2018)
option in
->
+ Add BLADE KEY(2018-2021),
SMART KEY MOUDLE(2018-2021)
options in
->
+ Add Creta/Alcazar SMART KEY MOUDLE,
I10/I20 SMART KEY MOUDLE
options in
->

VVDI Prog V5.2.7 (2023-04-18)
This version DON't need update firmware
Add MB91F53BC option in->
Add XC2361E-136 option in->
Add SPC5602D option in->
Add MQB-LOCK(D70F35xx)-READ, MQB-LOCK(D70F35xx)-WRITE, VW-4th-NEC35XX-READ, VW-4th-NEC35XX-WRITE, options in 5-DASHBOARD>->

VVDI PROG V5.2.6
This version don't need update firmware
1. The software added the function of saving read data to temporary file if read data fails.
2. Modify MQB-LOCK(D70F35xx)
option in->:
Optimize the process and Wiring diagram update.

VVDI Prog v5.2.4 (2023-02-01)
* This version DON't need update firmware
+ Add YingJie 500 315, ZhuHong 500 315 options in->
+ Add ROEWE EPS(D70F3506) option in->
+ Add Telsa battery(MM9Z1J638) option in->
+ Add HOWO A7, HOWO SITRAK 2083, HOWO T5, HOWO T5H,
HOWO T7H, HOWO TX, Sino Trunk2083, SITRAK 6011,
SITRAK 6021, SITRAK C5H SQUARE REMOTE, SITRAK C7H, SITRAK C7H B5,
SITRAK RHOMBUS REMOTE, SITRAK T7H options in->

VVDI Prog V5.2.2 (2022-11-28)
* This version DON't need update firmware
+ Add R5F212K2,
R5F212K4,
R5F21344,
R5F21345,
R5F21346,
R5F21364,
R5F21365,
R5F21366,
R5F21367,
R5F21368,
R5F2136A,
R5F2136C,
options in
->

VVDI Prog V5.2.1 (2022-10-31)
* This version DON't need update
firmware
* Modify M95080
option in <1-EEPROM&FLASH>->
* Modify CAMRY AC COMPUTER
option in->
+ Add MB90F952
option in
->
+ Add D78F0441,
D78F0442,
D78F0443,
D78F0444,
D78F0445,
D78F0451,
D78F0452,
D78F0453,
D78F0454,
D78F0455,
D78F0461,
D78F0462,
D78F0463,
D78F0464,
D78F0465,
D78F0471,
D78F0472,
D78F0473,
D78F0474,
D78F0475,
D78F0481,
D78F0482,
D78F0483,
D78F0484,
D78F0485,
D78F0491,
D78F0492,
D78F0493,
D78F0494,
D78F0495
options in
->
+ Add 39106-26810(ST10F275)
option in->
+ Add FORTHING T5
option in
->
+ Add ACCORD AIRBAG(SPC560P50L3)
option in->
+ Add ACCORD EPS(2022)
option in->
+ Add SONY1 BLUETOOTH
option in->

VVDI PROG latest software version V5.0.4 update
v5.0.4 (2021-07-01)
* This version DON’t need update firmware
+ Add PIC18XX25K80, PIC18XX26K80, PIC18XX45K80, PIC18XX46K80, PIC18XX65K80, PIC18XX66K80
options in->< MICROCHIP-PIC18F>
+ Add MM9Z1I638_UNSECURED, MM9Z1J638_UNSECURED options in->
+ Add MPC5514, MPC5515,MPC5516, MPC5517 options in->
+ Add BENZ-W205_W207_W212 BCM option in->
+ Add MISTRA-47-PKE-MOUDLE(2017) option in->
+ Add 70-CHIP-IMMO-MOUDLE option in->
+ Add HOWO-STRYKER-READ(2019), HOWO-STRYKER-WRITE(2019), options in->
+ Add HAVAL-H6PRO-DASHBOARD(2017) option in->
+ Add Bora(2015-2020)(D70F3423), JETTA(2015-2020)(D70F3423), SANTANA(2015-2020)(D70F3423), C-TREK(2015-2020)(D70F3423)
options in->
+ Add Lamando EPS(2018-)option in->

1.VVDI Prog Latest Update Information:
VVDI PROG Latest Software Version V4.8.9 Update
VVDI Prog V4.8.9 Download
-------------------------------------
v4.8.9              (2019-12-21)
* This version DON't need update firmware
+ Add VVDI PROG USER MUNUAL 4.8.9 version in Doc folder
+ Add HYOSOW-S7 in->
+ Add 820 in->  
+ Add S5 options  in->   
+ Add CROSS options  in->   
+ Add AUDI-Q5-AMP options in->   
+ Add 205-LAMP-RH options in->   
+ Add 330-CABRIOLET-MODULE options in->    
+ Add F18-FZD options in->     
+ Add MED17.7.2(ADAPTER) options in->
+ Add EDC17.7.2(ADAPTER) options in->
+ Add EDC17.7.8(ADAPTER) options in->
+ Add EDC17CP46(ADAPTER) options in->  
+ Add EDC17C45(ADAPTER) options in-> 
+ Add EDC17C56(ADAPTER) options in-> 
+ Add EDC17C50_Fxx(ADAPTER)options in->   
+ Add MED17.3.5(ADAPTER) options in->   
+ Add MED17.9.30(ADAPTER) options in->   
+ Add EDC17CP50(ADAPTER) options in->  
+ Add MED17.8.3(ADAPTER) options in->    
+ Add MEVD17.4.4(ADAPTER) options in-> 
+ Add ME17.1.6(ADAPTER) options in->   

VVDI PROG latest software version 4.8.8 update  (2019-11-12)
-------------------------------------
* This version DON't need update  firmware
* Fix ME17.5.22(ADAPTER) READ BUGs
+ Add VVDI PROG USER MUNUAL 4.8.8 version in Doc folder
+ Add STM32F407VG,STM32F407ZG options in->
+ Add CAS4-1L15Y-CERAMICS-NO-NEED-REMOVE-COMPONENTS,CAS4-1L15Y-METAL-NO-NEED-REMOVE-COMPONENTS PICTURE in->->
+ Add CAS4-5M48H-CERAMICS-NO-NEED-REMOVE-COMPONENTS,CAS4-5M48H-METAL-NO-NEED-REMOVE-COMPONENTS PICTURE in->->
+ Add CAS4-5M48H-CERAMICS-NO-NEED-REMOVE-COMPONENTS,CAS4-5M48H-METAL-NO-NEED-REMOVE-COMPONENTS PICTURE in->->
+ Add CAS4-5M48H-CERAMICS-NO-NEED-REMOVE-COMPONENTS,CAS4-5M48H-METAL-NO-NEED-REMOVE-COMPONENTS PICTURE in->->
+ Add CAS4-5M48H-CERAMICS-NO-NEED-REMOVE-COMPONENTS,CAS4-5M48H-METAL-NO-NEED-REMOVE-COMPONENTS PICTURE in->->
+ Add CAS4-5M48H-CERAMICS-NO-NEED-REMOVE-COMPONENTS,CAS4-5M48H-METAL-NO-NEED-REMOVE-COMPONENTS PICTURE in->->
+ Add MED17.1.62(ADAPTER) options in->
+ Add EDC17CP57(ADAPTER),ME17.8.32(ADAPTER),MED17.7.2(ADAPTER),MED17.7.3.1(ADAPTER) options in->
+ Add ME17.9.21.1(ADAPTER) options in->
+ Add  MED17.7.2(ADAPTER) options in->  
+ Add ME17.9.21.1(ADAPTER) options in->
+ Add ME17.9.52(ADAPTER),EDC17C54(ADAPTER),EDC17C74(ADAPTER),EDC17CP44(ADAPTER),ME17.1.1(ADAPTER),MED17.1.1(ADAPTER),MED17.1.6(ADAPTER),
  MED17.1.21(ADAPTER),MED17.1.61(ADAPTER),MED17.5.21(ADAPTER) options in->
+ Add TOYOTA_ME17.9.52(ADAPTER)  options in->
+ Add EDC17CP48(ADAPTER),EDC

VVDI PROG Latest Software V4.8.7 Update (2019-9-19)
-------------------------------------
* This version DON't need update firmware
* Fix BOSH ECU ADAPTER READ BUGs
+ Add VVDI PROG USER MUNUAL 4.8.7 version in Doc folder
+ Add R7F701062, R7F701064 ,R7F701067 options in
 ->
+ Add SCENIC(2007) options in->    
+ Add E3 options   in->  
+ Add TIGGO5(2014) options in-> 
+ Add 300(2005) options in->  
+ Add SOUTHEAST-DX3(2016) options in->     
+ Add FRM-SRS options in->  

VVDI PROG Latest Version V4.8.6 Update (2019-9-02)
-------------------------------------
* This version DON't need update firmware
+ Add VVDI PROG USER MUNUAL 4.8.6 version in Doc folder
+ Add ME17.5.22(TC1724)(ADAPTER),
  MEVD17.2.4_Exx(N20)(ADAPTER),
  MEVD17.2.4_Exx(N20)(ADAPTER),
  MEVD17.2.4_Fxx(N20)(ADAPTER),
  MEVD17.2.9_Fxx(N20)(ADAPTER),
  MEVD17.2.9_Exx(N20)(ADAPTER),
  MED17.5.25(TC1782)(ADAPTER),
  MED17_5_22(TC1782)(ADAPTER),
  MEVD17_2_3(B38)(ADAPTER),
  MEVD17_2_K(B38)(ADAPTER),
  MEVD17.2.5(ADAPTER),
  MEVD17.2.8(ADAPTER),
  MEVD17.2.H(ADAPTER),
  MEVD17.2.P_Fxx(N20)(ADAPTER),
  MEVD17.2_Fxx(N55)(ADAPTER),
  MEVD17.2.G(N55)(ADAPTER),
  MEVD17.2.6(N55)(ADAPTER) 
  options in
 ->
  (Need BOSH ECU ADAPTER)
+ Add ME17.5.22(ADAPTER),
  MED17_5_25(ADAPTER) options in
 ->

  (Need BOSH ECU ADAPTER)

VVDI PROG latest version V4.8.5 update
-------------------------------------
v4.8.5              (2019-7-30)
* This version DON't need update firmware
+ Add VVDI PROG USER MUNUAL 4.8.5 version in Doc folder
+ Add D70F4013, D70F4014, D70F4015, D70F4016, D70F4017,
  D70F4018, D70F4019 options in->
+ Add KUKA-STAR-Q2(2018) options in-> 
+ Add 408(FRONT-DOOR-MODULE) options in-> 

VVDI PROG latest software version V4.8.4 update 
-------------------------------------
v4.8.4              (2019-6-28)
* This version DON't need update firmware
+ Add VVDI PROG USER MUNUAL 4.8.4
  version in Doc folder
+ Add MC9S12Q128,
  MC9S12Q96,
  MC9S12Q64,
  MC9S12Q32 options in
 ->
+ Add IX35-IMMO options 
  in->
+ Add CADILLAC-CTS-PK3-IMMO(2007) 
  options in->
+ Add DELPHI-48-IMMO options 
  in->   
+ Add INNOVA-CRYSTA-FI
  options in->    
+ Add NEW-HONDA-CITY  
  options in->   
+ Add ACCORD-SRS(2019)  
  options in->  
+ Add A4-AC-CONTROLLER(2007) 
  options in->  
+ Add 525-EPB(2015)
  options in->      
+ Add 525-FUEL-PUMP-MODULE(2015)
  options in->       
+ Add S350-ROOF-CONTROL-UNIT
  options in->
+ Add MAGOTAN-GATEWAY options 
  in->

VVDI PROG latest software version V4.8.3 update (04.23.2019)
-------------------------------------
v4.8.3 (2019-5-23)
* This version DON't need update firmware
* Fix picture MC9S12-SECURED.jpg
* Fix STM8 option area size
* Fix BENZ EIS-W203-1J35D(ADAPTER) can not read problem
+ Add VVDI PROG USER MUNUAL 4.8.3 version in Doc folder
+ Add R7F701103, R7F701304, R7F7013045, R7F701305, R7F701310, R7F701311, R7F701312, R7F701313, R7F701314, R7F701315,
R7F701318, R7F701319, R7F701320, R7F701321, R7F701322, R7F701323 options in->
+ Add EIS-W639(2M73Y) options in-> 
+ Add AKEWAY(2017) options in->
+ Add K3(2018) options in->
+ Add AB12 options in-> 
+ Add AB12_CB1 options in->
+ Add GEARBOX(2008) options in->

VVDI PROG latest software version v4.8.2 (2018-4-25)
* This version DON't need update firmware
* Fix picture MC9S12-SECURED.jpg
+ Add VVDI PROG USER MUNUAL 4.8.2 version in Doc folder
+ Add R5F10C/D_Data_8KB_Read, R5F10C/D_Data_8KB_Write, R5F10C/10DxC_Flash_32KB_Read, R5F10C/10DxC_Flash_32KB_Write, R5F10C/10DxD_Flash_48KB_Read,
R5F10C/10DxD_Flash_48KB_Write, R5F10C/10DxE_Flash_64KB_Read, R5F10C/10DxE_Flash_64KB_Write, R5F10DxF_Flash_96KB_Read, R5F10DxF_Flash_96KB_Write,
R5F10DxG_Flash_128KB_Read, R5F10DxG_Flash_128KB_Write, R5F10DxJ_Flash_256KB_Read, R5F10DxJ_Flash_256KB_Write, R5F10DxK_Flash_384KB_Read,
R5F10DxK_Flash_384KB_Write, R5F10DxL_Flash_512KB_Read, R5F10DxL_Flash_512KB_Write, R5F10CxBx_Flash_24KB_Read,R5F10CxBx_Flash_24KB_Wri te,
options in->
+ Add R5F104XX_Data_4KB_Read, R5F104XX_Data_4KB_Write, R5F104XX_Data_8KB_Read, R5F104XX_Data_8KB_Write, R5F104xA_Flash_16KB_Read, R5F104xA_Flash_16KB_Write,
R5F104xC_Flash_32KB_Write, R5F104xC_Flash_32KB_Read, R5F104xD_Flash_48KB_Read, R5F104xD_Flash_48KB_Write, R5F104xE_Flash_64KB_Read, R5F104xE_Flash_64KB_Write,
R5F104xF_Flash_96KB_Read, R5F104xF_Flash_96KB_Write, R5F104xG_Flash_128KB_Write, R5F104xG_Flash_128KB_Read, R5F104xH_Flash_192KB_Read, R5F104xH_Flash_192KB_Write,
R5F104xJ_Flash_256KB_Read, R5F104xJ_Flash_256KB_Write, R5F104xK_Flash_384KB_Read, R5F104xK_Flash_384KB_Write, R5F104xL_Flash_512KB_Read, R5F104xL_Flash_512KB_Write,
options in->
+ Add LAGUNA-UCT-BCM(2013) options in->
+ Add LACROSSE options in->
+ Add EMGRAND-GL-PEPS(2017) options in->
+ Add SWIFT options in->
+ Add BALENO options in->
+ Add NEW-REGAL-SAS(2009-2013) options in->
+ Add A6L-LEVEL-REGULATOR(2014) options in->
+ Add IX35-POWER-DISTRIBUTOR(2014) options in->
+ Add 740-PLG-COMPUTER options in->
+ Add NATURAL-GAS-CONGPUTER options in->
  
VVDI PROG latest software version V4.8.1 (2019-3-19)
* This version DON't need update firmware
+ Add VVDI PROG USER MUNUAL 4.8.1 version in Doc folder
+ Add D80XX, D160XX, M35080XX, M35160XX options in <1-EEPROM&FLASH>->
+ Add XF-RFA(2013) options in->
+ Add CX70(2018) options in->
+ Add KARRY(2015) options in->
+ Add BJ20(2016) options in->
+ Add EQUINOX(2018) options in->

2.How To Update VVDI Prog Programmer Online?
This function require internet support
Click the "Upgrade" button enter the upgrade interface, show as following picture


Enter update interface, if software show ”communication with server failed”,please close your Anti-virus and computer firewall and retry. If software show “unable to find equipment”, please reconnect device
Tip information show the latest software version and upgrade information
 Device information show the device SN, device firmware version and the latest firmware version

Firmware upgrade steps:
1. Select the firmware version
2. Click“Start Firmware Upgrade” button
3. Don't close or pull out USB cable before upgrade finished

Software upgrade steps:
1. Click“Software Link 1" or "Software Link 2" button, download software from the web
2. Extract the file

3.VVDI Prog Programmer Supported Type List: 

EEPROM&Flash:
ADESTO, AKM, ALTERA, AMD, ATMEL, CATALYST, EON, EXEL, FAIRCHILD, FUJITSU, INTEL, MICROCHIP, MXIC, RAMTRON, ROHM, SEIKO, TOSHIBA, WINBOND, ⅪCoR, YMC.etc

MCU:
RENESAS V850, RENESAS H8X, RENESAS R8C, MOTOROLA MC68HC(9)08, MOTOROLA MC68HC(9)12, MOTOROLA MC9S08, MOTOROLA MC9S12, NXP PCF79XX, ST ST10F, INFINEON XC2XXX, ATMEL, ATMEGA XXXX, INFINEON XC164CS, MICROCHIP PIC18F

Support Model List:
ECU List:
For BENZ, BMW E Series, BMW F Series, BOMBARDIER, BOSH, CHANGAN, DELPHI, MAGNETI, MARELLI, RENAULT
For Ford, Hyundai, KIA, PEUGEOT,SIEMENS, for VOLKSWAGEN, OTHER

IMMOBILIZER List:
For AUDI, BACIMOTOR, BENZ, BMW, BUCIK, CHANGAN, CHEVROLET, FAW, CHRYSLER, FIAT, FORD, GEELY, GREATWALL, HYUNDAI, INFINITI, LANDROVER, JAGUAR, NISSAN, OPEL, PORSCHE, RENAULT, SAICMOTOR, SSANGYONG, STEC, TUNGTHIH, VOLKSWAGEN, VOLVO, YEMA, ZHONGHUA, ZOYTE .

DASHBOARD List:
For BACIMOTOR, BORGWARD, BUICK, CHANGAN, CHERY, CHEVROLET, DAYUN, DONGFENG, FAW, FORD, GEELY, FOTON, GACMOTOR, GEELY GREATWALL, HAFEI, TOYOTA, HANTENG, HAIMA, HONDA, JAC, JAGUAR, JINBEI, JMC, LUXGEN, NISSAN, SGMW, SUZUKI, TOYOTA, VOLOVO, ZHONGHUA, ZOTYE

REMOTE List:
For BMW E Series, BMW F Series

AIRBAG List:
For BENZ, BOSH, BUICK, CHANGAN, Chery, CHEVROLET, Citroen, FAW, Fiat, Ford, GEELY, GM, Halma, HAWTAI, HONDA, Hyundai, JMC, Land Rover, LUXGEN, LYNKCO, Opel, OTHERS, PEUGEOT, Renault, SAICMOTOR, Suzuki, TOYOTA, VOLKSWAGEN, VOLVO, ZOOT

BOSH-ECU-ADATPER List:
For ABARTH, Alfa Romeo, ASTON-MARTIN, AUDI, BENZ, BMW, BUGATTT-VEYRON, CHRYSLER, Citroen, DACIA-LOGAN, Fiat, Ford, GM, HONDA, Hyundai, Infinity, Isuzu, Jaguar, JEEP, KIA, Landrover, MASERATI, ACLAREN, PEUGEOT, SKODA, Suzuki, TOYOTA, VOLKSWAGEN, VOLVO

4.VVDI PROG Connection for Maybach: 


VVDI Prog Connection for Sprinter:


VVDI Prog Programmer Unit Description:
4.1.16 Pin DIP socket Function:
Read EEPROM chips Use method: Follow the image direction when insert the DIP chip (PIN1 as yellow point show as the picture);
SOP chip need soldering on 16Pin adaptor first, then insert the chip follow the image direction

4.2. MCU Reflash Cable
Function:Read & Write MC68HC(9)12, V850, H8X, R5C series chips,current version is V2
Use method: Soldering the line on pin of chip before read & write
Notes:(1) Please check all connection lines,ensure correct and reliable connection(2) Please Don’t lengthen CLK and GND-C line, maybe cause read data failed.


4.3. ECU Reflash Cable
Function:Read & Write engine ECU
Use method:Connect the ECU and R&W
Notes:Please check all connection lines, ensure correct and reliable connection


4.4.MC9S12 Reflash Cable
Function: Read & Write MC9S08, MC9S12 series chips, current version is V1
Use method: Soldering the line on pin of chip before read & write
Notes:(1) Please check all connection lines,ensure correct and reliable connection.(2) Please Don’t lengthen CLK and GND-C line, maybe cause read data failed.

5.VVDI Prog Programmer Feedback:
did a few tests today and this is what I found out.
It seems that VVDI prog reading speed is dependent on the processor speed of the computer.
CAS3 0L15Y flash read times
Centrino processor @ 1.6ghz Windows XP = 12mins
Core2 Duo processort @ 2.5ghz Windows 7 32 bit = 5 mins
i7 @ 4.4ghz Windows 7 64 bit = 2mins 30 seconds.
Other programmers do not seem to be affected by processor speed at all.
I also would of thought this was a fairly easy question to answer without me doing all the testing
Tested by me: cas 2, cas 3, cas 3+, Cas4 5m48h, volvo cem v40 all ok.
Is a very good tool and for bmw cas4 .
I tested today D80 and a m35080v6, and they work perfect.
Mine erased D160 (BMW F01 dash) with no problem.
Tried to renew bmw e series 868 key. Vvdi programmer claimed operation success but in tango key is now recognized as transponder type A. locked
I did renew 2 keys! Both worked and now are programmed to cars!
Only thing you need to disconnect from PCB is battery while writing the renew file. (Remove the batteries)
Renew BMW series E 868 key – 100% OK z vvdi-prog v4.5.7
FRM3 works perfectly
More EDC17 under ECU section would be great!
Especially BMW EDC16 and EDC17 for ISN purposes.
BMW F series FEM module reading but for that i can only dream about…
BMW BMSX bike ECU would be great…
Renew pcf7946 and 29f family
Renew E series remote with pcf7942 / pcf7944 would be fine
Unlock and download the 9S12G128 secure without erasing it first would be nice .
erasing all 35080s and d80 with soic clip would be super nice too!
I read the CAS3+ MCU with VVDI Prog and that worked perfect.
BMW FRM3 series Exx – READ and WRITE – OK
BMW KEY series Exx – OK

BMW DashBoard 6WB 160DQWT – READ , ERASE , WRITE – OK

6.VVDI Prog Reviews:

2004 Suzuki Jimny:

The first job i did with this kit was actually a 2004 Suzuki Jimny, literally within around 30 – 45 minutes of the parcel being delivered. The software was quick and easy to install (No cd provided, need to download from dealer website and update to latest version).

Anyway, for the Suzuki i used the VVDI-prog with the EEPROM clip adapter to read the immobox 24c01 in-circuit. Then using the VVDI2 immobiliser data tool, i was able to create a dealer key with an Xhorse 4d/4c chip. Write the new dump back to the immobox with VVDI-prog, put it all back together and worked first time thankfully after previous failed attempts with other devices.
 Anyway end goal complete and happy with the new purchase

BMW EWS3:
I did some testing on the bench with a BMW EWS3 using VVDI2 with the CAS adapter cable (Needs external 12Vdc supply). It reads the EWS ok, but can’t write a file back to EWS.
 I will try reading the EWS3+ that is in my car and produce a dealer key for it.

The file change km’ seems to read from dump ok, and will allow you to modify file with new km (untested on car though). If i get some time later on will try read/write with VVDIprog.

7.VVDI Prog Programmer Package List:
 

1. VVDI Prog device
2. EEPROM Socket
3. EEPROM Adapter
4. MC9S12 Reflash Cable V1
5. MCU Reflash Cable
6. ECU Reflash Cable
7. USB B-Tyte Cable
8. TB28FXXX Adapter (Optional)
9. PCF79XX Adapter (Optional)
10. New M35080/D80 Adapter (Optional)
11. New EWS3 Adapter (Optional)
12. New EEPROM CLIP Adapter (Optional)
13. New EWS4 Adapter (Optional)

User Comment(Total 0 Customer Reviews)

• No comment

Total 0 records, divided into1 pages. First Prev Next Last

Rank:
Your first & Lat Name:
Your E-mail Address:
Review detail:
Verification code:

Download

vvdi-prog-user-manual.pdf