V2026.03 MB Star C6 Original 1:1 Mercedes BENZ Xentry Diagnosis VCI DOIP Diagnostic Tool support Benz Cars and Trucks

V2026.03 MB Star C6 Mercedes BENZ Xentry Diagnosis VCI DOIP Diagnostic Tool support Benz Cars and Trucks

Notice!!!

1.If you purchase option 2-500G SSD,please make sure your computer can use 2.5" hard drive, then replace your computer's hard drive with ours upon receiving the item. After booting up, pls contact us to activate software remotely.

Our hard drive cannot be used externally via USB.
If you are unwilling to replace your hard drive, please purchase remote installation service.

2.If you purchase option 3-one-time remote installation service, only one of the car or truck software can be selected for installation, pls tell us which software version you want to install,these two types of software cannot be installed on the same system.

1)2026.03 Car Xentry software version (Only support cars)

2)2023.09 Car Xentry + Truck Xentry software version (Can support both cars and trucks before 2023.09)

System requirements: Windows 10 64-bit, 8G RMB, over 260GB free space on C disk

It supports MB diagnostic software Xenntry, For Mercedes Benz super engineer Vediamo and dedicated development software Monaco DTS, which has higher access rights than SDconnect C4/C5. VCI supports CAN/DoIP networks and can be used for diagnostics and writing of Audio & video entertainment systems for new cars.

MB Star C6 XENTRY C6 Star Diagnosis VCI Multiplexer for Mercedes Vehicles.  

Software listing :
1.DAS 2026.03 for car and DAS 2023.09 for truck: the automatically Diagnosis Assistance System.Support 257 and so on new cars to register free to diagnosis
2.Xentry 2026.03 for car and Xentry 2023.09 for truck: New software released by Benz Company after 04/2009 by diagnosis new cars.
3.WIS net 2021.10:Workshop Information System
Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method.What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.
4.EPC.net 2018.11:Electronic Parts Catalog
5.ST Finder:2023
6.STARUTILITIES:the movement management system and self-test
7.SD MEDIA 2014
8.PL76 2022.01
9.Engineer version Vediamo updated to V5.01.01，Engineer version DTS updated to V9.02，Upgrade to the latest version of 2022 data
10.Functions: Star Diagnostic & programming (Support SCN Coding request client have an online account)
11.Support DoIP Function (For Commander online programming)
12.Supported Multi-Language: English, Bulgarian, Danish, Greek, Spanish, French, Italian, Korean, Polish, Romanian, Serbo-Croatian, Turkish, Czech, German, Finish, Hungarian, Japanese, Dutch, Portuguese, Russian, Swedish, Chinese
13.Warranty: Main Unit 1 Year Warranty, Free technical support for any device problem

500G SSD has installed 2 systems, after restarting the computer, you can choose one of the systems to enter.

Software display:

Mercedes C6 Technical Specifications

Supported Industrial Standards:
1. ISO-22900-1/2 MVCI with D-PDU Driver (Actual hardware channel support below)
2. ISO13400-1/2/3/4 DoIP Driver
3. CAN-BUS1 Channel：HSCAN1/CANFD1：PIN 6/14
4. CAN-BUS2 Channel：HSCAN2/CANFD2：PIN 12/13，PIN 3/11，PIN 1/9，
5. CAN-BUS3 Channel：FTCAN：PIN 12/13，PIN 3/11，PIN1/9，
6. 2 channel K-Line *13
   K1-Line：K1, K2 ,K3, K6, K7, K8, K9, K10, K11, K12, K13, K14, K15
   K2-Line：K1, K2, K3, K6, K7, K8, K9, K10, K11, K12, K13, K14, K15
7. ADC Input
8. Gigabit eCAT DB26 Output
9. 100Mbps USB2.0 HS Network Card
10. WIFI Repeater/Bridge

Supported Protocols:
1. KW2CVW
2. CYCLERX
3. UDS
4. KW2C3PE
5. KW2C2N（SAE J1939）
6. 485（SAE J1708）
7. KW2CANN
8. KW2000N
9. KW2K2N
10. KW2000PE
11. DoIP

Mercedes Benz Xentry diagnosis VCI DOIP C6 Features:
Can be used for all model series of For Mercedes For Benz vehicles
Support DoIP, cover more functions during SCN Coding than SD C4/C5
Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
Diagnosis updates no longer necessary – firmware updates required on rare occasions
Does not need a power supply unit for external power supply
Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
Assyst & ASSYST + systems

Supported systems
Engine
Transmission
Climate control system
SRS (Supplementary restraint system)
ABS
ASR
MPL
GM
BENZ ORIGINAL ANTI-THEFT DASX SYSTEM
System «Keyless-Go» from Mercedes-Benz
OBD-II SYSTEM
Advantages
Light and easy-to-use
No built-in motherboards, hard-drives, fans, displays and batteries
No external power needed
No regular firmware update needed

Package list:
Option 1 Package list：
1pc x XENTRY Diagnosis VCI Bzen C6 Multiplexer
1pc x OBDII Cable
1pc x USB Cable



Option 2 Package list：
1pc x XENTRY Diagnosis VCI Bzen C6 Multiplexer
1pc x OBDII Cable
1pc x USB Cable
1pc x 500G SSD 



Option 3 Package list：
1pc x XENTRY Diagnosis VCI Bzen C6 Multiplexer
1pc x OBDII Cable
1pc x USB Cable
1pc x One-time software remote installation service

Notice:
Only one of the car or truck software can be selected for installation, pls tell us which software version you want to install,these two types of software cannot be installed on the same system.

1)2026.03 Car Xentry software version (Only support cars)

2)2023.09 Car Xentry + Truck Xentry software version (Can support both cars and trucks before 2023.09)

System requirements: Windows 10 64-bit, 8G RMB, over 260GB free space on C disk

Option 4 Package list：
1pc x XENTRY Diagnosis VCI Bzen C6 Multiplexer
1pc x OBDII Cable
1pc x USB Cable
1pc x second hand Lenovo T450 laptop with latest software



Second Hand Laptop Lenovo T450
Specification:
Brand: Lenovo
Condition: Used
Type:Laptop/Notebook
Screen Size:14
Processor Type:Intel (R) Core(TM) I5-5200U CPU
Memory: 8GB

Option 5 Package list:
1pc x XENTRY Diagnosis VCI Bzen C6 Multiplexer
1pc x OBDII Cable
1pc x USB Cable
1pc x second hand Panasonic CF54 Laptop

Second Hand Panasonic CF54 Laptop Specification:
Brand: Panasonic
Condition: Used
Type:TOUGHBOOK
Screen Size:14
Processor Type:Intel (R) Core(TM) I5-5300U CPU
Memory: 8GB

User Comment(Total 28 Customer Reviews)

• by Nicole Bauer,Apr 11,2022
  

  C6 support DOIP?

  Reply #1 by CnAutotool Apr 11,2022
  C6 support DOIP, work with model W213/205 well
  
  CnAutotool

  ---

• by Octavia Rockefeller,Apr 03,2022
  

  Very good store, very good guys, quickly answer all questions, sent the device, helped set up.

  Reply #1 by CnAutotool Apr 09,2022
  Thank you for your feedback
  
  CnAutotool

  ---

• by Novia Horatio,Apr 01,2022
  

  all good, software activation very fast and can diagnose my car, so far nothing bad, thank you

  Reply #1 by CnAutotool Apr 01,2022
  Thank you for your feedback
  
  CnAutotool

  ---

• by Hamiltion Southey,Mar 12,2022
  

  As the product description, So everything is wonderful.

  Reply #1 by CnAutotool Mar 12,2022
  Thank you for your feedback
  
  CnAutotool

  ---

• by Vivien Finn,Feb 10,2022
  

  very good salesman always available and very helpful. I will buy again at the seller.

  Reply #1 by CnAutotool Feb 10,2022
  Thank you for your feedback
  
  CnAutotool

  ---

• by Andrew j fox,Dec 17,2020
  

  I have T400 so can I buy C6 star to install it?

  Reply #1 by Cara Dec 17,2020
  Hello , the hard disk can work with the laptop after 2208 year with SATA port , thank you
  
  Cara

  ---

• by Rachel Basham,Nov 15,2020
  

  Can you tell me what is total price to send it to South Africa ?

  Reply #1 by Cara Nov 15,2020
  Hi , you can make the order online directly , its our discount price recently ,thank you
  
  Cara

  ---

• by Roycen I. Nelson,Oct 30,2020
  

  is it possible to have EPC/WIS/ASRA on this laptop ?

  Reply #1 by Cara Oct 30,2020
  Hello , we recommend you can choose the other type of C6 here : https://www.cnautotool.com/goods-6842-Mercedes-BEZN-MB-SD-Connect-C6-Plus-Lenovo-T410-Laptop.html , this one can support more old vehicles , thank you
  
  Cara

  ---

• by Hayden Harrison,Sep 16,2020
  

  I want Xentry installed in Dutch ( Netherelands ) language , is it possiable ?

  Reply #1 by Cara Sep 16,2020
  Yes , the software support Dutch language , our engineer can install this language for you , but when you make the order , please send email inform us , sale@cnautotool.com , thank you
  
  Cara

  ---

• by raymond ballejos,Aug 12,2020
  

  This C6 can do SCN coding very well

  Reply #1 by Cara Aug 12,2020
  Thanks for your support for our product
  
  Cara

  ---

Total 28 records, divided into3 pages. First Prev Next Last

Rank:
Your first & Lat Name:
Your E-mail Address:
Review detail:
Verification code: