CG FC200 ECU Programmer Full Version with Solder Free Adapters Set 6HP & 8HP MSV90 N55 N20 B48 B58

Download

FC200-User-Manual.docx

FC200-Support-ECU-List.pdf

V1.1.3.0 CG FC200 ECU Programmer Full Version with Solder Free Adapters Set 6HP & 8HP MSV90 N55 N20 B48 B58

Product Description
1.Supports connection by Bench, Boot, OBD for more than 98% of ECUs.
2.No need to open the shell and punch holes to protect the original car.

CG FC200 ECU Programmer Full Version Highlights:
1. Protect Original Car Parts
Supports BENCH mode and OBD mode for more than 98% of ECUs, no need to open the shell and punch holes to protect the original car

2. Intelligent Recognition
The "identification" function can help users better diagnose whether the ECU module is communicating and check whether the wiring is wrong. If the ECU module can communicate without damage and the wiring is correct, the recognition can be successful, and the chip information, hardware information, and firmware information can be read out.
 
3.Module Clone
Supports ECU data reading and writing and module cloning, no synchronization matching, no online programming, data sub-regional burning, automatic verification, and maximum protection of chips and modules.

4. ISN Read and Write
Supports engine computer ISN code acquisition for all BMW series (including Mini), which is convenient for key matching and anti-theft maintenance.
     
5. VIN modification
Solves the problem of double VIN or VIN mismatch of vehicles, which is convenient for vehicle maintenance.

6. Data Processing
Supports engine computer data analysis and modification for Audi/Seat/Skoda/Volkswagen models;
Supports the shutdown of Bosch MED/EDC17 series engine computer anti-theft system;
Supports the TPROT off function of Bosch VAG MEDC17 series, BMW/Mini MEVD17/EDC17 series, Hyundai/Kia EDC17/MED(G)17 series.

7.FC200 not only supports BMW ECU but also supports over three thousand ECUs like KTAG, Kess, Dimsport, etc.
Check FC200 Support ECU List

8. Multi-Language: English, French, Spanish, Polish, Traditional Chinese and Simplified Chinese

9. Full Version with All License Activated.
Free Update Online for One Year. The annual Fee will be $125/ year after the first year.

10. With New Adapters Set No Need Disassembly in Package:
Adapters Including: 6HP & 8HP, MSV90, N55, N20, B48/B58, B38, 271KE Adapter, 271DE Adapter.
(With this adapter set, you won't need the old B48/B58 cable anymore).

V1.1.3.0  Registered Version NEW (2023.05.24)
1.Newly added CONNECTAL TC17 platform mode ECU: PCR2.1, SDI7, DPS6
2.Add BOSCH MPC5xx platform mode ECU: MED9.1, MED9.5, MED9.5.10, ME9.0, EDC16CP31, EDC16CP35, EDC16C2, EDC16C8
3.New Volkswagen TCU mileage repair function: DQ200 TC1766, DQ250, VL381, DL382
4.Add Hyundai/Kia/Ssangyong KEFICO CPEGD2.20. x ECU functions: platform mode data read and write, modify VIN functions
5.Add Mercedes Benz CRD2. x MPC556x engine platform mode
6.DELPHI TC17 chip ECU adds PFLASH verification function
7.ECU with PFLASH verification function added to BOSCH ST10F chip: ME7.4.5
8.GM 6T30, 6T80, 6L80 TCU added PFLASH verification function
9.Diesel ECU EDC17C53, EDC17C63, EDC17C81 and other newly added anti-theft system shutdown functions

CG FC200 Version V1.1.2.0 Update Notice on Apr 7th, 2023
1. Fix the problem of engine recognition and read/write failure in GM E38, E67 and E39
2. Add GM E37, E39A, E78, E80 and E83 engine platform mode
3. GM E38, E67, E39 and E39A engines add Ext FLASH verification function
4. Add the "time repair" function of "Lovol harvester" to support the EDC17CV53 engine of Lovol harvester
5. Benz VGS-FDCT, VGS2-FDCT and VGS-FCVT gearbox add PFLASH verification function
6. Volkswagen DL501 Gen2 and DL382 transmissions add PFLASH verification function
7. Add BOSCH ST10 engine: M7.4.4, ME7.3.2, ME7.4.4
8. Fix the connection failure of DELPHI CRD3.10, CRD3.xx TC1797 and other engine platform modes

CG FC200 V1.1.1.0 Software Update Notice on Feb 1st, 2023
1.Setup interface adds-Server Selection function
2.Optimize the device activation interface (add the "Activate" prompt)
3.Repair the failure problem of the Bosch query abroad
4.Added GM AcDelco transmission platform mode: GM 6T30/35/40/45/50, GM 6T70/75/80, GM 6L45/50/80/90
5.New BOOT mode of BOSCH ST10 engine: ME7.1.1, ME7.5.10, ME7.8.2, and MED 7.6.2
6.New BOSCH TC17 engine platform mode: ME17 TC1728 (China)
7.New BOOT mode of KEFICO TC17 engine: CPGDSH2.2x.x, CPGDSH1.26.1, KME 1.9.3.1
8.New BOSCH VAG gearbox PFLASH calibration function: DQ200 TC1784, DQ200 TC1766, DQ250 TC1766, DL501Gen1 TC1766, VL381 TC1766
9.Newly modified VIN model: MED 17.8.3

CG FC-200 V1.1.0.0 Software Update Notice on Dec 13th, 2022:
1. Added DELPHI platform and BOOT engine: CRD3.10, CRD3.E1, CRD3.F1, CRD3E.1, CRD3P.B0, CRD3P.C0, CRD3P.D1, CRD3P.G0, and CRD3xx
2. Added BOSCH BOOT engines: ME7.5.20, M7.9.5, ME7.9.51, and ME7.9.52
3. Add PFLASH check function for MG1C, MD1C SPC5777 and TC298TP engines of BOSCH
4. Added password reading function in the platform mode of GM engine E39
5. Optimize the PFLASH verification algorithm of BOECH's TC17 series engines
6. Added BOSCH platform engine: EDC17CV53
7. Fix some bugs and optimize software performance

Newest CG FC200 V1.0.9.0 Upgrade Notice in Oct, 2022:
1.Added GM engine computer
ACDelco E38: Read and write EEPROM and FLASH
ACDelco E39: Read and write FLASH and password
ACDelco E67: Read and write EEPROM and FLASH
Models involved: Buick, Cadillac, Chevrolet, GMC, Holden, Hummer, Isuzu, Opel, Pontiac, Saab, Saturn, Vauxhall

2. Added new gearbox computer
ZF_9HP TC1782: Read and write DFLASH and PFLASH
Models involved: Acura, Chrysler, Citroen, DS, Peugeot, Dodge, Fiat, Honda, Jaguar, Jeep, Land Rover

3. Added Bosch engine computer (platform mode)
MD1CS018
MG1CS032
MG1CS026
MG1CA007
MG1CA811
MG1CA920

4.Added engine computer to modify VIN function
EDC17C42
EDC17CP27
MED17.8.2
MEVD17.2.7

5. Fixed some bugs and optimized software performance

Note:
Please update the authorization for the first time to use, and then restart the FC200 software.

CG FC200 V1.0.8.0  Registered Version NEW (2022.09.07)
1. Added BMW 28A0, 101F fault code closing function
2. Added Bosch series engines: EDC17CP05 TC1797, EDC17C61, MED17.6.9, MG1CS019, MD1CS012, EDC17CV45, MG1CP002, ME17.U.6, MEV17.4.2 TC1766, MEV17.4.2 TC1767
3. New Bosch platform mode engines: ME17.8.8, MED17 and MED17.8.10
4. New Bosch boot mode engines: ME7.7.0, M7.9.8, MEG17.9.2, MEG17.9.21
5. Fix some bugs and optimize software performance
6. Add service renewal function

Package List:
1set x CGDI FC200 Full Verion
1x New Adapters Set

FC200 Software Free Download Link, please download here after you receive FC200.
Here is FC200 User Manual for your reference, too.



Functions of Each Adapter:
1. MSV90 Adapter:
This adapter supports ISN reading & writing, data backup, and recovery of BMW MSV90



2. N20 Adapter:
This adapter supports ISN reading and writing, VIN modification, and data reading and writing functions of the N20 and N13 of the F series chassis of BMW



3. B48/B58 Adapter:
This adapter supports ISN reading and data reading and writing functions of BMW models: MG1CS003, MG1CS024, and MG1CS201.



4. 271KE Adapter & 271DE Adapter:
These two adapters support the data backup and recovery functions of Mercedes-Benz SIM 271KE and SIM 271DE



5. 6HP & 8HP Adapter:
The adapter is used for the data backup and recovery function of the 6HP and 8HP EGS of BMW models.

User Comment(Total 4 Customer Reviews)

• by Robert Chrzan,Apr 27,2022
  

  do you have any technical support if i have problem use this machine ?

  Reply #1 by Cara Apr 27,2022
  Yes , of course , we offer technical support free all life time , thank you
  
  Cara

  ---

• by Mike Zukowski,Mar 16,2022
  

  can i have more discount for this product ?

  Reply #1 by Cara Mar 16,2022
  Hello , actually the price online for this product is our discount already , thank you
  
  Cara

  ---

• by damir omerovic,Feb 21,2022
  

  how long for delivery time to south africa ?

  Reply #1 by Cara Feb 21,2022
  Hello , usually under 10 days by DHL , thank you
  
  Cara

  ---

• by juan D Gomez Aguilar,Jan 13,2022
  

  Reply #1 by Cara Jan 13,2022
  Hello , no need to pay the cost for activation , when you install the software will be actived automatically, thank you
  
  Cara

  ---

Total 4 records, divided into1 pages. First Prev Next Last

Rank:
Your first & Lat Name:
Your E-mail Address:
Review detail:
Verification code:

Download

FC200-User-Manual.docx

FC200-Support-ECU-List.pdf