K-TAG ECU Programming Tool is obd2repair ecu ChipTuning tool. Need user guide for KTAG ECU Programming Tool? Here is for you.
KTAG ECU Programming Tool K TAG Master KTAG for J-Tag
The Super KTAG ECU programmer allows to download new information to your car computer,and increase a car’s power band, or store the original stock computer program of your vehicle. If you have used others ECU CHIP programmer with the program from another car manufacturer, the Super KTAG ECU programmer must be reset to return your computer back to the stock condition.
K-TAG ECU Programming Tool is designed entirely around the needs of our customers to be more responsive and reliable.A true champion of innovation, K-TAG introduces another brand new novelty to Alientech world:J-Tag communication for Asian vehicles. Standard.
Step 1: Connect the K-TAG ECU Flasher to the diagnostic OBD-II 16pin port located under the dash panel of your car. Verify that the ignition switch is turned off.
Step 2: Install the software of K TAG ECU Programming Tool, after the “found the new hardware” message appears on the screen.just install the drive correctly,
Step 3: Press the “Yes” button after the software displays the “Read the ECU ” message.
Step 4: Turn off the ignition switch. and press the “Write the ECU” Button on the software, after the “YES” message prompt to start the initialization of the car computer memory(ECU).
Step 5: Turn on the ignition switch after the “succeed” message appears.
Step 6: Close the software , and “Do Not Turn Off your car”
Step 7: Turn off the ignition switch and disconnect the KTAG ECU programmer from the diagnostic port.
And please purchase on the below website will be given best price:
http://www.cnautotool.com/goods-4304-K-TAG+ECU+Programming+Chip+Tunning+Tool+.html
