Here is a short instruction show you guide on how to use G-scan coding injector for Suzuki S-Cross and Vitara with D16A engine.
Steps:
Connect G-Scan tool to Suzuki, then select “Diagnosis”
Select “Korea & Japan” on the left, then select “SUZUKI”–>”MANUAL SELECT”
Select “International”
Hit “16PIN CONNECTOR”–>”EPI(Engine/AT), then hit “OK”
Select “Special Function”
Select “Injector Calibration Code”
Hit “OK”
[F1:Data List] shows a list of injectors installed in the engine.
Hit “F1”
Back to “Injector Calibration code “ then hit”ok” –”F2”
[F2:Injector replacement] allows you to register injector individually or all at once
Select F1-F4 for according cylinder. Hit “F1”, Input “ACFHEMEHD”
Once you are ready, hit “OK” and confirm the entered injectors code.
Hit “OK”, Turn IG OFF–>wait for 30 sec–> turn IG ON–> hit “OK”
Function is completed.
Multiple Injectors coding
Select “Injector Calibration code “–> “OK”–>”F2”, you can input multiple injector and code them at once. Hit “F5”
Once you are ready, hit “OK” and confirm the entered injectors code.
Turn IG OFF–> Wait for 30 sec –> Turn IG ON –> Hit “OK”
Function is completed.
If you want to know more about Suzuki Repair, please refer to Suzuki Trouble Repair
