How to Install Nissan Consult 3 III Plus Diagnostic Software

How to install Nissan Consult 3 Diagnostics Software. The installation manual of Nissan Consult 3 Diagnostic Software,This user manual will guide how to install & crack Nissan consult 3 software on your laptop,   If you have any question, you can contact with us:

The installation guide of Nissan Consult III USB drive Connect the Consult III firmware with your pc by USB cables, and connect the Consult III hardware with your car via OBD-II 16pin diagnostic plug, supply 12V power to Consult III firmware.

Step 1: Open the DVD of Consult III software, click Consult-iii-* setup.exe

Step 2: Just show Nissan Consult III Setup Wizard

Step 3: Choose the installation path of Consult III

Step 4: click Install Consult III software

Step 5: wait for the Installshield Wizar

Step 6: Choose VIMI registration

Step 7: Input Consult III VI serial number: 926573, and click: set

Step 8: Click the home button

Step 9: then click: “Connect” button

Step 10: the Consult III will found hardware, show: checking the firmware version

Step 11: choose the Function of Consult III software, just enjoy it

The installation guideof Nissan Consult III USBdrive

Connect the Consult III firmware with your pc by USB cables, and connect the Consult III hardware with your carvia OBD-II 16pin diagnostic plug, supply 12V power to Consult III firmware

Step 1: Found New hardware( nissan Consult III) Wizard, choose “Yes,this time only”

Step 2: Choose Install the Consult III software automatically

Step 3 Choose JCI-iB-Alliance verhicle interface, just click next

Step 4: just click finish, completing Consult III hardware drive installation

How to Crack Nissan Consult III software, and configure Consult III software

Step 1: Open Consult III software on desktop

Step 2: perhaps show these error: there are no registered VI/MI,please contact your administrator, just ignore, click “OK”

Step 3: click “SUB” button

18

Step 4: click Administrator setting

Step 5: input Consult III Password –nissanconsult3

Step 6: Choose VIMI registration

Step 7: Input Consult III VI serial number: 926573, and click: set

Step 8: Click the home button

Step 9: then click: “Connect” button

Step 10: the Consult III will found hardware, show: checking the firmware version

Step 11: choose the Function of Consult III software, just enjoy it




Q: Nissan consult 3 support diagnostic: vi models ?

A: Yes. For this nissan consult iii, there are two models in total: MI and VI. VI is for diagnose and MI is for waveforms test.

Q: How to register VI/MI? When i install the Consult 3 software, it prompt me “you do not register VI / MI, please contact the administrator”.

A: pls read the above user installation manual of nissan consult III.

Done!

Cnautotool