Q: I insert the DELL D630 hard disk of Mb Star C4 into the computer and then turn on the computer; it asked me for administrator code, what is this code?
A: This administrator code is: User$star2004
About Installation
Q: I got this error reading ” A disk read error occurred, Press Ctrl+Alt+Del to restart” after I insert the hard disk of SD Compact 4 into the computer.
My moveable hard disk of Mb Star Compact C4 has no display. Does it use USB cable to connect the hard disk and then active?
A: Yes, use USB cable to connect the moveable hard disk and the computer, firstly install “setup.exe”, and then import Mercedes Benz software, the computer configuration should not be too low.
Q: After I connect Mb Star C4 Diagnostic to the car, SD C4 has no voltage on the PIN8 OBD cable, but when the ignition key on the second position, the PIN8 cable voltage is 12V. What’s the problem?
A: It suggests you don’t start the car, after the car start, the PIN8 will display voltage value.
Q: Does the hard disk of MB SD Connect Compact 4 Star 2012.11 (item NO. SP100-C) contain WAS and DAS open program?
A: Yes, it does.
Q: Working with SP100, I wanted to change the way fuel consumption is calculated in the KIW module. This is done in option 1772 of KIW, only adaptable with the developer version of DAS (see FOTO.JPG). Since when starting I have to agree to the special “dangers” the developer version implements, I thought I would be able to change that value. But there is no modify option available
A: the way of fuel consumption cannot be changed; you are allowed to choose option 1772 of KIW.
Q: Xentrty error reading “Internal error: (3.17)-3.173 you must contact the User Help Desk”
A: Don’t set the file “lic-key-2” as “read only.
If you want to Order, please check: http://www.cnautotool.com/category-172-b0-MB+Star+C4.html
