KESS V3 Product Description: KESS3 gives you more control than its predecessors, KESSv2 and K-TAG, and can be upgraded without the need to spend money on new hardware. This new tool allows users to remap in a faster, easier way… Continue Reading
KSUITE v2.53 – KESS v5.017 / K-TAG v7.020 KESSv2 is a ECU and TCU, the best tool to write back the original or modified file in the vehicle ECU in a few minutes, simply communicating through the OBD port. Through… Continue Reading
As a professional mechanic, I have done a lot of research on ECU programmer, I was impressed on two products K-TAG ECU Programming and KESS V2. Here CnAutotool will Share my understanding of them. K-TAG introduces another brand new novelty to Alientech… Continue Reading
Q: Besides French, what other language KESS V2 is available? A: KESS V2 Software Support Language: English, French, German, Italian, Spanish, Portuguese Q: Is yours KESS V2 master or slave? If slave, how it works? Do file have to decrypted/ crypted… Continue Reading
Q: When KESS V2 read ECU, I got checksum error. A: When read the ECU, it appear the checksum error, try to google the file c + + 2005 library, and then install it, the problem will solve. Q(1): How does KESS V2 checksums work? Does KESS V2 automatically confirm and rewrite? Does KESS v2 work with truck? Such as: Mercedes MP1/MP2/MP3 or MAN TGA. A(2): After reading the software, kess v2 will automatically calibrate checksums. KESSV2 doesn’t work with truck, because the truck voltage is too high and KESS V2 will be burnt out. Q(2): Then K-tag work with truck? A(2): Yes, it does. Q: How to connect KESS V2 to K-LINE med 17, do you have any manual or diagram? A: If your car is OBD diagnostic socket, just plug the OBD cable into the car; if your car is not OBD diagnostic socket, after you select the ECU type in the KESS V2 software, the diagram will appear and show you how to connect Q: when I use KESS V2 OBD2 Manager Tuning Kit and choose the version 12, 8L E4, type D13B, HP 400, ECU TRW EMS2, “OK” button is not available. A: “OK” button not available means KESS V2 doesn’t support this car model. Besides, KESS V2 only covers car models, not trucks. Q: After I open “KSuite.exe” and ready to run KESS V2, all of the following icons are gray and locked, I can’t go on. A: it means it doesn’t Found New Hardware, back to check whether the driver is installed successfully. Advice you contact us to send you KESS V2 video tutorial. Q: KESS V2 has error “Connections not established A: The driver is not successfully installed, go to “Device Manager” to check whether it has KESS V2 driver? Advice you contact us to send you KESS V2 video tutorial. Q: What’s the difference between KTAG and KESS V2? A: KTAG and KESS V2 share the same software, but KESS V2 has OBD function (means KESS V2 program ECU by OBD diagnostic cable) while KTAG doesn’t have. Q: What’s the difference between KESS V2 and FGTech Galletto 2? A: Both KESS V2 and FGTech Galletto 2 work with a number of cars, but they program ECU via different ways. Fgtech program ECU by BDM (in another word,… Continue Reading