Topic: connect Xtool KC501 with X100 PAD Elite (PAD3) to read remote frequency of 3 keys. Let’s go. Connect KC501 with power supply in 2 methods. 1st option: provide power using X100 PAD Elite. 2nd option: 5V DC power supply… Continue Reading
Steps on EEPROM Chip ReadingWriting Via Xtool KC501 1.First of all, connect USD with PC 2.Check the light Red Light on: standby mode Green Light on: Data Transmission E.g.: Atmel AT24C01A Chip Read/Write 3.Then, Open the chip lock socket lever… Continue Reading
Xtool KC501 is able to read and write keys. Here we go for the procedure. Put the key or key chip into the slot accordingly, connect to PC via USB, and open the software on PC Info: Read the key… Continue Reading
The only difference between IM608 and IM608 Pro is the programmer that comes with the tablet. The tablets themselves IM608 and IM608Pro have no difference in terms of hardware and software. All keep the same. As for the difference of… Continue Reading
What Toyota models will Yanhua Digimaster3 correct mileage on Yanhua Digimaster3 will correct mileage on many Toyota car models mainly via OBP adapter. Press “Meter system”, then “Japan & Korea”. Press “Toyota”. Look at the following Toyota car models Yanhua… Continue Reading
In this Autel MS908S PRO VS MaxiSys Elite review, we’ve compared two of the best Autel Maxisys Professional diagnostic scanners. Which is better? Autel MS908SP or Maxisys Elite scan tools? We’ve created a table for you to see how they… Continue Reading
Both Autel MaxiAP AP200 and Launch Thinkdiag are OBD2 code readers support Bluetooth on Android and iOS devices. What’s the difference between them? Which is better? Product Launch Thinkdiag Autel AP200 Image Language Chinese Simplified, English, Chinese Traditional, Japanese, Korean,… Continue Reading
Launch X431 Thinkdiag is a new automotive diagnostic device has been released at www.cnautotool.com. It comes with three free software, and supports full system diagnosis for the car and 16 kinds of special function and 115 kinds of car software.… Continue Reading
The HD module must work on any of the x431 v plus or pro3 or pad 3 account which old customer have purchased before and have been activated by LAUNCH already. If not have the x431 v plus or pro3… Continue Reading
It’s confirmed that Yanhua Digimaster 3 will program Nissan pathfinder mileage. Look at the images of Nissan pathfinder option: Select “Meter system” then “Japan & Korea”. Select “Nissan”. Select “Pathfinder”. Have option: 2000, 2005-2008, 93C56, 2004, 93C46 etc. Please firstly… Continue Reading
There are two options available in the Navigation Bar on the left side of the screen when accessing the MaxiSYS Ultra Diagnosis section: 1. Auto Scan – start auto scanning for all the available systems on the vehicle 2. Control… Continue Reading
Please install ActiveSync software on your PC well before software update. Or please log in http://smelecom.com/sm/download.htm and download ActiveSync software and install it on your PC first of all. The steps are similar among “Function Sync” and “Active Function” and… Continue Reading
After replacing EMPSECU,steering wheel,Inclined steering column,Steering column gear etc. The instrument PS warning light is on，X-431 is read to the fault code C1515- torque sensor zero adjustment is not completed -Current – electronic auxiliary power steering system fault code.Need tooperate… Continue Reading
The MaxiSys Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence. It features a 13-inch touchscreen tablet with Android 7.0 OS powered by an Octa-core processor (2.3GHz Quad + 1.7GHz Quad), substantial 256GB built-in memory, all powering… Continue Reading
In this instruction,it show you guide on simple parameters programming by Perkins EST diagnostic software for Perkins 2806C-E16 engine ECM. Procedures: Note:It is test by demo mode Select “Governor Maximum Stability Factor #1” and click “Change” button to input new… Continue Reading