Make sure the GM Tech 2 is not connected to a vehicle or other power source and follow the cleaning
procedures detailed below.
Cleaning the Display
The display collects dust and grime during normal use. Occasionally wipe the screen with a clean, soft, static-free cloth. Remove stubborn stains by applying a non-abrasive glass cleaner to a soft cloth and wipe cloth across display area.
Cleaning the Keypad
Clean the keypad with a non-abrasive cleaner. Apply a small amount of cleaner on a soft cloth and wipe cloth across keypad area.
Maintaining the Cable Assemblies and Connectors
Inspect cable assemblies during connection and disconnection to components. Watch for any cuts or abrasions along the cables. Check the connectors and connector pins for grease, dirt and corrosion. If
contaminants are present, remove them with a mild soap solution.
About Storing the GM Tech2, you should remember that Store the Tech 2 away from solvents and other liquids. It is NOT moisture proof; Store the Tech 2 away from direct sunlight. Ultraviolet and infrared light will darken the display;Store the Tech 2 Scanner in its plastic case. Otherwise, the high-impact plastic cover could become scratched. For more detail about how to maintain car diagnostic tool , please visit our website.
