Sometimes whether GM Tech 2 can be used in long-term depends on the tool maintenance. After using the GM Tech2, a few simple steps will insure that you get the most life out of this diagnostic tool.
Before all thing start, you should remember do not spray or pour cleaner anywhere on the Tech 2 Scanner. If the Tech 2 should become dirty, clean it with a mild detergent or hand soap. Avoid using harsh solvents such as petroleum-based cleaning agents: acetone, benzene, trichlorethylene, etc. Harsh solvents can etch Tech 2 plastic surfaces.
Although the Tech 2 is water resistant it is not waterproof, so be sure to thoroughly dry off the Tech 2 Scanner prior to usage and/or storage.
Maintenance of the Tech 2 requires periodic inspection and cleaning of:
• The display window
• The keypad
• The cable assemblies and connectors
GM Tech2 package are made of by VCI main unit, software carda and some connectors.
Generally speaking, the gm tech2 only do for gm car, but it’s not right, the gm tech2 car diagnostic tool can choose the software: GM/ISUZU/SUZUKI/HOLDEN/OPEL.
You can choose any one for the standard package, but if you want to do all these cars, you can buy another 4 kinds cars software card.. otherwise you can buy other auto scanner to diagnose the most of cars in the world, like the launch x431 diagun iii, launch x431 IV, or Autel MaxiDAS DS708 and etc.
